< Back
Get-ADAccountResultantPasswordReplicationPolicy
Post
NAME Get-ADAccountResultantPasswordReplicationPolicy
SYNOPSIS
Gets the resultant password replication policy for an Active Directory account.
SYNTAX
Get-ADAccountResultantPasswordReplicationPolicy [-Identity] <ADAccount> [-DomainController] <ADDomainController>
[-AuthType {Negotiate | Basic}] [-Credential <PSCredential>] [-Partition <String>] [-Server <String>]
[<CommonParameters>]
DESCRIPTION
The Get-ADAccountResultantPasswordReplicationPolicy gets the resultant password replication policy for a user,
computer or service account on the specified read-only domain controller.
The policy will be one of the following values:
Allow or 1
DenyExplicit or 0
DenyImplicit or 2
Unknown or -1
The Identity parameter specifies the account. You can identify a user, computer, or service account object by its
distinguished name (DN), GUID, security identifier (SID) or Security Account Manager (SAM) account name. You can
also set the Identity parameter to an account object variable, such as $<localAccountobject>, or pass an account
object through the pipeline to the Identity parameter. For example, you can use the Get-ADUser, Get-ADComputer,
Get-ADServiceAccount or Search-ADAccount cmdlets to retrieve an account object and then pass the object through
the pipeline to the Get-ADAccountResultantPasswordReplicationPolicy cmdlet.
The DomainController parameter specifies the read-only domain controller. You can identify a domain controller by
its IPV4Address, global IPV6Address, or DNS host name. You can also identify a domain controller by the
Distinguished Name (DN) of the NTDS settings object or the server object, the GUID of the NTDS settings object or
the server object under the configuration partition, or the DN, SamAccountName, GUID, SID of the computer object
that represents the domain controller. You can also set the DomainController parameter to a domain controller
object variable, such as $<localDomainControllerObject>.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DomainController <ADDomainController>
Specifies a read-only domain controller (RODC). The cmdlet returns the password replication policy of the
account for this RODC. You can identify the domain controller by providing one of the following values.
GUID (objectGUID)
Example: 768c44de-f72d-66e0-8a88-0523ca495f20
IPV4Address
Example:157.59.132.61
Global IPV6Address
Example: 2001:4898:0:fff:200:5efe:157.59.132.61
DNS Host Name (dNSHostName)
Example: corp-DC01.corp.contoso.com
Name of the server object
Example: corp-DC01$
Distinguished Name (DN) of the NTDS Settings object
Example: CN=NTDS Settings,CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso
Distinguished Name (DN) of the server object that represents the domain controller
Example: CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID of NTDS settings object under the configuration partition
Example: 68adaf21-e28d-6012-bca8-320d93450ab0
GUID of server object under the configuration partition
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Distinguished Name (DN) of the computer object that represents the domain controller.
Example: CN=CORP-DC12,OU=Domain Controllers,DC=corp,DC=contoso,DC=com
Note: The identifier in parentheses is the LDAP display name for the attribute.
The following example shows how to set this parameter to the DNS host name of a domain controller.
-DomainController "corp-DC01.corp.contoso.com"
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADAccount>
Specifies an Active Directory account object by providing one of the following property values. The identifier
in parentheses is the LDAP display name for the attribute.
Distinguished Name
Example: CN=SaraDavis ,CN=Users,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Security Identifier (objectSid)
Example: S-1-5-21-3165297888-301567370-576410423-1103
SAM Account Name (sAMAccountName)
Example: saradavis
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to an account
object instance.
Derived types such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
This example shows how to set the parameter to a distinguished name.
-Identity "CN=saradavis,CN=Users,DC=corp,DC=contoso,DC=com"
This example shows how to set this parameter to an account object instance named "accountInstance".
-Identity $accountInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Partition <String>
Specifies the distinguished name of an Active Directory partition. The distinguished name must be one of the
naming contexts on the current directory server. The cmdlet searches this partition to find the object defined
by the Identity parameter.
The following two examples show how to specify a value for this parameter.
-Partition "CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
-Partition "CN=Schema,CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
In many cases, a default value will be used for the Partition parameter if no value is specified. The rules
for determining the default value are given below. Note that rules listed first are evaluated first and once
a default value can be determined, no further rules will be evaluated.
In AD DS environments, a default value for Partition will be set in the following cases: - If the Identity
parameter is set to a distinguished name, the default value of Partition is automatically generated from this
distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If none of the previous cases apply, the default value of Partition will be set to the default partition or
naming context of the target domain.
In AD LDS environments, a default value for Partition will be set in the following cases:
- If the Identity parameter is set to a distinguished name, the default value of Partition is automatically
generated from this distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If the target AD LDS instance has a default naming context, the default value of Partition will be set to
the default naming context. To specify a default naming context for an AD LDS environment, set the
msDS-defaultNamingContext property of the Active Directory directory service agent (DSA) object (nTDSDSA) for
the AD LDS instance.
- If none of the previous cases apply, the Partition parameter will not take any default value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Windows PowerShell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.ActiveDirectory.Management.ADAccount
An account object is received by the Identity parameter.
Derived types, such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
OUTPUTS
Microsoft.ActiveDirectory.Management.ADResultantPasswordReplicationPolicy
Returns an ADResultantPasswordReplicationPolicy enum value that represents the resultant password replication
policy for an account on the specified domain controller.
NOTES
This cmdlet does not work with AD LDS.
This cmdlet does not work with an Active Directory Snapshot.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Get-ADAccountResultantPasswordReplicationPolicy BradSu "FABRIKAM-RODC1"
Description
-----------
Get the resultant password replication policy on the domain for a given user account.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Get-ADAccountResultantPasswordReplicationPolicy BobKe -DomainController "FABRIKAM-RODC1"
Description
-----------
Get the resultant password replication policy on a specific domain controller for a given user account.
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>Get-ADAccountResultantPasswordReplicationPolicy "CN=Jordao
Moreno,OU=Europe,OU=Sales,OU=UserAccounts,DC=FABRIKAM,DC=COM" "FABRIKAM-RODC1"
Description
-----------
Get the resultant password replication policy on a specific domain controller for a given user account DN.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291016
Get-ADComputer
Get-ADServiceAccount
Get-ADUser
Search-ADAccount
SYNOPSIS
Gets the resultant password replication policy for an Active Directory account.
SYNTAX
Get-ADAccountResultantPasswordReplicationPolicy [-Identity] <ADAccount> [-DomainController] <ADDomainController>
[-AuthType {Negotiate | Basic}] [-Credential <PSCredential>] [-Partition <String>] [-Server <String>]
[<CommonParameters>]
DESCRIPTION
The Get-ADAccountResultantPasswordReplicationPolicy gets the resultant password replication policy for a user,
computer or service account on the specified read-only domain controller.
The policy will be one of the following values:
Allow or 1
DenyExplicit or 0
DenyImplicit or 2
Unknown or -1
The Identity parameter specifies the account. You can identify a user, computer, or service account object by its
distinguished name (DN), GUID, security identifier (SID) or Security Account Manager (SAM) account name. You can
also set the Identity parameter to an account object variable, such as $<localAccountobject>, or pass an account
object through the pipeline to the Identity parameter. For example, you can use the Get-ADUser, Get-ADComputer,
Get-ADServiceAccount or Search-ADAccount cmdlets to retrieve an account object and then pass the object through
the pipeline to the Get-ADAccountResultantPasswordReplicationPolicy cmdlet.
The DomainController parameter specifies the read-only domain controller. You can identify a domain controller by
its IPV4Address, global IPV6Address, or DNS host name. You can also identify a domain controller by the
Distinguished Name (DN) of the NTDS settings object or the server object, the GUID of the NTDS settings object or
the server object under the configuration partition, or the DN, SamAccountName, GUID, SID of the computer object
that represents the domain controller. You can also set the DomainController parameter to a domain controller
object variable, such as $<localDomainControllerObject>.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DomainController <ADDomainController>
Specifies a read-only domain controller (RODC). The cmdlet returns the password replication policy of the
account for this RODC. You can identify the domain controller by providing one of the following values.
GUID (objectGUID)
Example: 768c44de-f72d-66e0-8a88-0523ca495f20
IPV4Address
Example:157.59.132.61
Global IPV6Address
Example: 2001:4898:0:fff:200:5efe:157.59.132.61
DNS Host Name (dNSHostName)
Example: corp-DC01.corp.contoso.com
Name of the server object
Example: corp-DC01$
Distinguished Name (DN) of the NTDS Settings object
Example: CN=NTDS Settings,CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso
Distinguished Name (DN) of the server object that represents the domain controller
Example: CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID of NTDS settings object under the configuration partition
Example: 68adaf21-e28d-6012-bca8-320d93450ab0
GUID of server object under the configuration partition
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Distinguished Name (DN) of the computer object that represents the domain controller.
Example: CN=CORP-DC12,OU=Domain Controllers,DC=corp,DC=contoso,DC=com
Note: The identifier in parentheses is the LDAP display name for the attribute.
The following example shows how to set this parameter to the DNS host name of a domain controller.
-DomainController "corp-DC01.corp.contoso.com"
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADAccount>
Specifies an Active Directory account object by providing one of the following property values. The identifier
in parentheses is the LDAP display name for the attribute.
Distinguished Name
Example: CN=SaraDavis ,CN=Users,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Security Identifier (objectSid)
Example: S-1-5-21-3165297888-301567370-576410423-1103
SAM Account Name (sAMAccountName)
Example: saradavis
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to an account
object instance.
Derived types such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
This example shows how to set the parameter to a distinguished name.
-Identity "CN=saradavis,CN=Users,DC=corp,DC=contoso,DC=com"
This example shows how to set this parameter to an account object instance named "accountInstance".
-Identity $accountInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Partition <String>
Specifies the distinguished name of an Active Directory partition. The distinguished name must be one of the
naming contexts on the current directory server. The cmdlet searches this partition to find the object defined
by the Identity parameter.
The following two examples show how to specify a value for this parameter.
-Partition "CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
-Partition "CN=Schema,CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
In many cases, a default value will be used for the Partition parameter if no value is specified. The rules
for determining the default value are given below. Note that rules listed first are evaluated first and once
a default value can be determined, no further rules will be evaluated.
In AD DS environments, a default value for Partition will be set in the following cases: - If the Identity
parameter is set to a distinguished name, the default value of Partition is automatically generated from this
distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If none of the previous cases apply, the default value of Partition will be set to the default partition or
naming context of the target domain.
In AD LDS environments, a default value for Partition will be set in the following cases:
- If the Identity parameter is set to a distinguished name, the default value of Partition is automatically
generated from this distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If the target AD LDS instance has a default naming context, the default value of Partition will be set to
the default naming context. To specify a default naming context for an AD LDS environment, set the
msDS-defaultNamingContext property of the Active Directory directory service agent (DSA) object (nTDSDSA) for
the AD LDS instance.
- If none of the previous cases apply, the Partition parameter will not take any default value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Windows PowerShell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.ActiveDirectory.Management.ADAccount
An account object is received by the Identity parameter.
Derived types, such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
OUTPUTS
Microsoft.ActiveDirectory.Management.ADResultantPasswordReplicationPolicy
Returns an ADResultantPasswordReplicationPolicy enum value that represents the resultant password replication
policy for an account on the specified domain controller.
NOTES
This cmdlet does not work with AD LDS.
This cmdlet does not work with an Active Directory Snapshot.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Get-ADAccountResultantPasswordReplicationPolicy BradSu "FABRIKAM-RODC1"
Description
-----------
Get the resultant password replication policy on the domain for a given user account.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Get-ADAccountResultantPasswordReplicationPolicy BobKe -DomainController "FABRIKAM-RODC1"
Description
-----------
Get the resultant password replication policy on a specific domain controller for a given user account.
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>Get-ADAccountResultantPasswordReplicationPolicy "CN=Jordao
Moreno,OU=Europe,OU=Sales,OU=UserAccounts,DC=FABRIKAM,DC=COM" "FABRIKAM-RODC1"
Description
-----------
Get the resultant password replication policy on a specific domain controller for a given user account DN.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291016
Get-ADComputer
Get-ADServiceAccount
Get-ADUser
Search-ADAccount