< Back
Move-ADDirectoryServer
Post
NAME Move-ADDirectoryServer
SYNOPSIS
Moves a directory server in Active Directory to a new site.
SYNTAX
Move-ADDirectoryServer [-Identity] <ADDirectoryServer> [-Site] <ADReplicationSite> [-AuthType {Negotiate | Basic}]
[-Credential <PSCredential>] [-Server <String>] [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Move-ADDirectoryServer cmdlet moves a directory server in Active Directory to a new site within the same
domain.
The Identity parameter specifies the directory server to move. You can specify a directory server object by one of
the following values:
Name of the server object (name)
Distinguished Name (DN) of the NTDS Settings object
Distinguished Name (DN) of the server object that represents the directory server
GUID (objectGUID) of server object under the configuration partition
GUID (objectGUID) of NTDS settings object under the configuration partition
You can also set the Identity parameter to a directory server object variable such as
$<localDirectoryServerObject>, or you can pass an object through the pipeline to the Identity parameter. For
example, you can use the Get-ADDomainController to get a directory server object and then pass that object through
the pipeline to the Move-ADDirectoryServer cmdlet.
The Site parameter specifies the new site for the directory server. You can identify a site by its distinguished
name (DN) or GUID.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADDirectoryServer>
Specifies an Active Directory server object by providing one of the following values. The identifier in
parentheses is the LDAP display name for the attribute.
Name of the server object (name)
For AD LDS instances the syntax is of a name is <computer-name>$<instance-name>
Example: asia-w7-vm4$instance1
Note: When you type this value in Windows PowerShell, you must use the backtick (`) as an escape character for
the dollar sign ($). Therefore, for the previous example you would type the following: asia-w7-vm4`$instance1
For other Active Directory instances, use the value of the name property
Example: corp-DC01
Distinguished Name of the NTDS Settings object
Example: CN=NTDS Settings,CN=CORP-DC12,CN=Servers,CN=NA-CAN-BC,CN=Sites,CN=Configuration,DC=corp,DC=contoso
Distinguished Name of the server object that represents the directory server
Example: CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (objectGUID) of server object under the configuration partition
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
GUID (objectGUID) of NTDS settings object under the configuration partition
Example: 768c44de-f72d-66e0-8a88-0523ca495f20
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to an object
instance.
This example shows how to set the parameter to a distinguished name.
-Identity "CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com"
This example shows how to set this parameter to a directory server object instance named
"directoryServerInstance".
-Identity $directoryServerInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Site <ADReplicationSite>
Specifies the new site for the directory server. You can identify the site by one of the following property
values. Note: The identifier in parentheses is the LDAP display name for the attribute.
Distinguished name (DN)
Example: CN= NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (ObjectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Name (name)
Example: NA-CAN-QBC
The following example shows how use this parameter to specify a site object by using the site name.
-Site "NA-CAN-QBC"
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADDirectoryServer
A directory server object is received b y the Identity parameter.
OUTPUTS
None
NOTES
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Move-ADDirectoryServer -Identity "FABRIKAM-DC2" -Site "Branch-Office-Site"
Description
-----------
Move the domain controller "FABRIKAM-DC2" to the site "Branch-Office-Site".
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Get-ADDomainController -Filter {IsReadOnly -eq $true} | Move-ADDirectoryServer -site "RODC-Site-Name"
Description
-----------
Move all Read Only Domain Controllers to the site "RODC-Site-Name".
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291057
Move-ADDirectoryServerOperationMasterRole
SYNOPSIS
Moves a directory server in Active Directory to a new site.
SYNTAX
Move-ADDirectoryServer [-Identity] <ADDirectoryServer> [-Site] <ADReplicationSite> [-AuthType {Negotiate | Basic}]
[-Credential <PSCredential>] [-Server <String>] [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Move-ADDirectoryServer cmdlet moves a directory server in Active Directory to a new site within the same
domain.
The Identity parameter specifies the directory server to move. You can specify a directory server object by one of
the following values:
Name of the server object (name)
Distinguished Name (DN) of the NTDS Settings object
Distinguished Name (DN) of the server object that represents the directory server
GUID (objectGUID) of server object under the configuration partition
GUID (objectGUID) of NTDS settings object under the configuration partition
You can also set the Identity parameter to a directory server object variable such as
$<localDirectoryServerObject>, or you can pass an object through the pipeline to the Identity parameter. For
example, you can use the Get-ADDomainController to get a directory server object and then pass that object through
the pipeline to the Move-ADDirectoryServer cmdlet.
The Site parameter specifies the new site for the directory server. You can identify a site by its distinguished
name (DN) or GUID.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADDirectoryServer>
Specifies an Active Directory server object by providing one of the following values. The identifier in
parentheses is the LDAP display name for the attribute.
Name of the server object (name)
For AD LDS instances the syntax is of a name is <computer-name>$<instance-name>
Example: asia-w7-vm4$instance1
Note: When you type this value in Windows PowerShell, you must use the backtick (`) as an escape character for
the dollar sign ($). Therefore, for the previous example you would type the following: asia-w7-vm4`$instance1
For other Active Directory instances, use the value of the name property
Example: corp-DC01
Distinguished Name of the NTDS Settings object
Example: CN=NTDS Settings,CN=CORP-DC12,CN=Servers,CN=NA-CAN-BC,CN=Sites,CN=Configuration,DC=corp,DC=contoso
Distinguished Name of the server object that represents the directory server
Example: CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (objectGUID) of server object under the configuration partition
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
GUID (objectGUID) of NTDS settings object under the configuration partition
Example: 768c44de-f72d-66e0-8a88-0523ca495f20
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to an object
instance.
This example shows how to set the parameter to a distinguished name.
-Identity "CN=CORP-DC12,CN=Servers,CN=NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com"
This example shows how to set this parameter to a directory server object instance named
"directoryServerInstance".
-Identity $directoryServerInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Site <ADReplicationSite>
Specifies the new site for the directory server. You can identify the site by one of the following property
values. Note: The identifier in parentheses is the LDAP display name for the attribute.
Distinguished name (DN)
Example: CN= NA-CAN-QBC,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (ObjectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Name (name)
Example: NA-CAN-QBC
The following example shows how use this parameter to specify a site object by using the site name.
-Site "NA-CAN-QBC"
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADDirectoryServer
A directory server object is received b y the Identity parameter.
OUTPUTS
None
NOTES
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Move-ADDirectoryServer -Identity "FABRIKAM-DC2" -Site "Branch-Office-Site"
Description
-----------
Move the domain controller "FABRIKAM-DC2" to the site "Branch-Office-Site".
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Get-ADDomainController -Filter {IsReadOnly -eq $true} | Move-ADDirectoryServer -site "RODC-Site-Name"
Description
-----------
Move all Read Only Domain Controllers to the site "RODC-Site-Name".
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291057
Move-ADDirectoryServerOperationMasterRole