< Back
New-ADResourceProperty
Post
NAME New-ADResourceProperty
SYNOPSIS
Creates a new resource property in Active Directory.
SYNTAX
New-ADResourceProperty [-DisplayName] <String> [-AppliesToResourceTypes <String[]>] [-AuthType {Negotiate |
Basic}] [-Credential <PSCredential>] [-Description <String>] [-Enabled <Boolean>] [-ID <String>] [-Instance
<ADResourceProperty>] [-IsSecured <Boolean>] [-OtherAttributes <Hashtable>] [-PassThru]
[-ProtectedFromAccidentalDeletion <Boolean>] [-Server <String>] [-SharesValuesWith <ADClaimType>]
[-SuggestedValues <ADSuggestedValueEntry[]>] -ResourcePropertyValueType <ADResourcePropertyValueType> [-Confirm]
[-WhatIf] [<CommonParameters>]
DESCRIPTION
The New-ADResourceProperty cmdlet creates a new resource property in the directory.
PARAMETERS
-AppliesToResourceTypes <String[]>
Specifies the resource types to which this resource property is applied.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description <String>
Specifies a description of the object. This parameter sets the value of the Description property for the
object. The LDAP Display Name (ldapDisplayName) for this property is "description".
The following example shows how to set this parameter to a sample description.
-Description "Description of the object"
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-DisplayName <String>
Specifies the display name of the resource property. The display name of the resource property must be unique.
The display name of a resource property can be used as an identity in other Active Directory cmdlets. For
example, if the display name of a resource property is "Country", then you can use 'Get-ADResourceProperty
-Identity "Country"' to retrieve the resource property.
Required? true
Position? 1
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Enabled <Boolean>
Specifies if the resource property is enabled.
Required? false
Position? named
Default value False
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ID <String>
Specifies the resource property ID. This is an optional parameter. By default, New-ADResourceProperty
generates the ID automatically.
The ID should only be set manually in a multi-forest environment where the same resource properties need to
work across forests. For resource properties to be considered identical across forests, their ID must be the
same.
To specify the ID, the ID string must conform to the following format:
1. Start with a prefix string of 1 to 15 characters in length.
2. The prefix string must be followed by an underscore.
3. The prefix string and underscore must be followed by a suffix string of 1 to 16 characters in length.
4. All characters contained in either prefix or suffix strings must contain only valid filename characters.
Required? false
Position? named
Default value Auto-generated
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Instance <ADResourceProperty>
Specifies an instance of a resource property object to use as a template for a new resource property object.
You can use an instance of an existing resource property object as a template or you can construct a new
resource property object by using the Windows PowerShell command line or by using a script. The following
examples show how to use these two methods to create a new resource property object.
Method 1: Use an existing resource property object as a template for a new object. To retrieve an instance of
an existing resource property object, use a cmdlet such as Get-ADResourceProperty. Then provide this object to
the Instance parameter of the New-ADResourceProperty cmdlet to create a new resource property object. You can
override property values of the new object by setting the appropriate parameters.
$objectInstance = Get-ADResourceProperty -Identity "Country"
New-ADResourceProperty -Name "Region" -Instance $ObjectInstance
Method 2: Create a new ADResourceProperty and set the property values by using the Windows PowerShell command
line interface. Then pass this object to the Instance parameter of the New-ADResourceProperty cmdlet to create
the new resource property object.
$objectInstance = new-object Microsoft.ActiveDirectory.Management.ADResourceProperty
$objectInstance.Description = "Non-Disclosure Agreement (NDA)"
New-ADResourceProperty -Name "NDA" -Instance $ObjectInstance
Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be
set will raise an error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IsSecured <Boolean>
Used to configure whether the resource property is secure or not. Only secure resource properties can be used
for authorization decisions or used within central access rules. Unsecured resource properties cannot be used
for these purposes.
Required? false
Position? named
Default value True
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-OtherAttributes <Hashtable>
Specifies object attribute values for attributes that are not represented by cmdlet parameters. You can set
one or more parameters at the same time with this parameter. If an attribute takes more than one value, you
can assign multiple values. To identify an attribute, specify the LDAPDisplayName (ldapDisplayName) defined
for it in the Active Directory schema.
Syntax:
To specify a single value for an attribute:
-OtherAttributes @{'AttributeLDAPDisplayName'=value}
To specify multiple values for an attribute
-OtherAttributes @{'AttributeLDAPDisplayName'=value1,value2,...}
You can specify values for more than one attribute by using semicolons to separate attributes. The following
syntax shows how to set values for multiple attributes:
-OtherAttributes @{'Attribute1LDAPDisplayName'=value; 'Attribute2LDAPDisplayName'=value1,value2;...}
The following examples show how to use this parameter.
To set the value of a custom attribute called favColors that takes a set of Unicode strings, use the following
syntax:
-OtherAttributes @{'favColors'="pink","purple"}
To set values for favColors and dateOfBirth simultaneously, use the following syntax:
-OtherAttributes @{'favColors'="pink","purple"; 'dateOfBirth'=" 01/01/1960"}
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ProtectedFromAccidentalDeletion <Boolean>
Specifies whether to prevent the object from being deleted. When this property is set to true, you cannot
delete the corresponding object without changing the value of the property. Possible values for this parameter
include:
$false or 0
$true or 1
The following example shows how to set this parameter to true.
-ProtectedFromAccidentalDeletion $true
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ResourcePropertyValueType <ADResourcePropertyValueType>
The parameter specifies the value type for this resource property. When a resource property is passed to a
resource manager (e.g., File Server), the resource manager leverages the resource property value type to
determine how the resource property should be handled.
The full list of resource property value types can be retrieved by calling the Get-ADResourcePropertyValueType
cmdlet.
Example: Get-ADResourcePropertyValueType -Filter * | ft Name
Below is a list of the built-in resource property value types available in Active Directory:
- MS-DS-SinglevaluedChoice
- MS-DS-YesNo
- MS-DS-Number
- MS-DS-DateTime
- MS-DS-OrderedList
- MS-DS-Text
- MS-DS-MultivaluedText
- MS-DS-MultivaluedChoice
Required? true
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-SharesValuesWith <ADClaimType>
Use this parameter to create a reference resource property. Reference resource properties do not provide their
own suggested values, but rather use the suggested values from the claim type object specified in this
parameter. This enables the resource property to always remain valid for use in comparisons to its referred
claim type within a central access rule.
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-SuggestedValues <ADSuggestedValueEntry[]>
Specifies one or more suggested values for the resource property. An application may choose to present this
list of suggested values for the user to choose from. When RestrictValues is set to true, the application
should restrict the user to pick values from this list only.
Example:
$us = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("US", "United States of America",
"United States of America");
$jp = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("JP", "Japan", "Japan");
New-ADResourceProperty Country -ResourcePropertyValueType MS-DS-MultivaluedChoice -SuggestedValues $us,$jp
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADResourceProperty
OUTPUTS
None or Microsoft.ActiveDirectory.Management.ADResourceProperty
NOTES
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>New-ADResourceProperty Authors -ResourcePropertyValueType MS-DS-MultivaluedText
Description
-----------
Create a new resource property with display name 'Authors'. The resource property allows the names of multiple
authors to be specified.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>$us = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("US", "United States of
America", "United States of America");
$jp = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("JP", "Japan", "Japan");
New-ADResourceProperty Country -ResourcePropertyValueType MS-DS-MultivaluedChoice -SuggestedValues $us,$jp
Description
-----------
Create a new resource property with display name 'Country'. The suggested values are set to 'US' and 'JP'.
Applications using this resource property would allow their users to specify one of the suggested values as this
resource property's value.
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>New-ADResourceProperty Country -ResourcePropertyValueType MS-DS-MultivaluedChoice -SharesValuesWith Country
Description
-----------
Create a new reference resource property with display name 'Country'. It uses an existing claim type named
'Country' for its suggested values. This enables the resource property to be always valid for comparisons with the
referenced claim type in a central access rule.
-------------------------- EXAMPLE 4 --------------------------
C:\\PS>New-ADResourceProperty Authors -ResourcePropertyValueType MS-DS-MultivaluedText -ID Authors_60DB20331638
Description
-----------
Create a new resource property with display name 'Authors', and set its ID to 'Authors_60DB20331638'.
The ID should only be set manually in a multi-forest environment where the same resource property needs to work
across forests. By default, New-ADResourceProperty generates the ID automatically. For resource properties to be
considered identical across forests, their ID must be the same.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291074
Get-ADResourceProperty
SYNOPSIS
Creates a new resource property in Active Directory.
SYNTAX
New-ADResourceProperty [-DisplayName] <String> [-AppliesToResourceTypes <String[]>] [-AuthType {Negotiate |
Basic}] [-Credential <PSCredential>] [-Description <String>] [-Enabled <Boolean>] [-ID <String>] [-Instance
<ADResourceProperty>] [-IsSecured <Boolean>] [-OtherAttributes <Hashtable>] [-PassThru]
[-ProtectedFromAccidentalDeletion <Boolean>] [-Server <String>] [-SharesValuesWith <ADClaimType>]
[-SuggestedValues <ADSuggestedValueEntry[]>] -ResourcePropertyValueType <ADResourcePropertyValueType> [-Confirm]
[-WhatIf] [<CommonParameters>]
DESCRIPTION
The New-ADResourceProperty cmdlet creates a new resource property in the directory.
PARAMETERS
-AppliesToResourceTypes <String[]>
Specifies the resource types to which this resource property is applied.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description <String>
Specifies a description of the object. This parameter sets the value of the Description property for the
object. The LDAP Display Name (ldapDisplayName) for this property is "description".
The following example shows how to set this parameter to a sample description.
-Description "Description of the object"
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-DisplayName <String>
Specifies the display name of the resource property. The display name of the resource property must be unique.
The display name of a resource property can be used as an identity in other Active Directory cmdlets. For
example, if the display name of a resource property is "Country", then you can use 'Get-ADResourceProperty
-Identity "Country"' to retrieve the resource property.
Required? true
Position? 1
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Enabled <Boolean>
Specifies if the resource property is enabled.
Required? false
Position? named
Default value False
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ID <String>
Specifies the resource property ID. This is an optional parameter. By default, New-ADResourceProperty
generates the ID automatically.
The ID should only be set manually in a multi-forest environment where the same resource properties need to
work across forests. For resource properties to be considered identical across forests, their ID must be the
same.
To specify the ID, the ID string must conform to the following format:
1. Start with a prefix string of 1 to 15 characters in length.
2. The prefix string must be followed by an underscore.
3. The prefix string and underscore must be followed by a suffix string of 1 to 16 characters in length.
4. All characters contained in either prefix or suffix strings must contain only valid filename characters.
Required? false
Position? named
Default value Auto-generated
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Instance <ADResourceProperty>
Specifies an instance of a resource property object to use as a template for a new resource property object.
You can use an instance of an existing resource property object as a template or you can construct a new
resource property object by using the Windows PowerShell command line or by using a script. The following
examples show how to use these two methods to create a new resource property object.
Method 1: Use an existing resource property object as a template for a new object. To retrieve an instance of
an existing resource property object, use a cmdlet such as Get-ADResourceProperty. Then provide this object to
the Instance parameter of the New-ADResourceProperty cmdlet to create a new resource property object. You can
override property values of the new object by setting the appropriate parameters.
$objectInstance = Get-ADResourceProperty -Identity "Country"
New-ADResourceProperty -Name "Region" -Instance $ObjectInstance
Method 2: Create a new ADResourceProperty and set the property values by using the Windows PowerShell command
line interface. Then pass this object to the Instance parameter of the New-ADResourceProperty cmdlet to create
the new resource property object.
$objectInstance = new-object Microsoft.ActiveDirectory.Management.ADResourceProperty
$objectInstance.Description = "Non-Disclosure Agreement (NDA)"
New-ADResourceProperty -Name "NDA" -Instance $ObjectInstance
Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be
set will raise an error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IsSecured <Boolean>
Used to configure whether the resource property is secure or not. Only secure resource properties can be used
for authorization decisions or used within central access rules. Unsecured resource properties cannot be used
for these purposes.
Required? false
Position? named
Default value True
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-OtherAttributes <Hashtable>
Specifies object attribute values for attributes that are not represented by cmdlet parameters. You can set
one or more parameters at the same time with this parameter. If an attribute takes more than one value, you
can assign multiple values. To identify an attribute, specify the LDAPDisplayName (ldapDisplayName) defined
for it in the Active Directory schema.
Syntax:
To specify a single value for an attribute:
-OtherAttributes @{'AttributeLDAPDisplayName'=value}
To specify multiple values for an attribute
-OtherAttributes @{'AttributeLDAPDisplayName'=value1,value2,...}
You can specify values for more than one attribute by using semicolons to separate attributes. The following
syntax shows how to set values for multiple attributes:
-OtherAttributes @{'Attribute1LDAPDisplayName'=value; 'Attribute2LDAPDisplayName'=value1,value2;...}
The following examples show how to use this parameter.
To set the value of a custom attribute called favColors that takes a set of Unicode strings, use the following
syntax:
-OtherAttributes @{'favColors'="pink","purple"}
To set values for favColors and dateOfBirth simultaneously, use the following syntax:
-OtherAttributes @{'favColors'="pink","purple"; 'dateOfBirth'=" 01/01/1960"}
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ProtectedFromAccidentalDeletion <Boolean>
Specifies whether to prevent the object from being deleted. When this property is set to true, you cannot
delete the corresponding object without changing the value of the property. Possible values for this parameter
include:
$false or 0
$true or 1
The following example shows how to set this parameter to true.
-ProtectedFromAccidentalDeletion $true
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ResourcePropertyValueType <ADResourcePropertyValueType>
The parameter specifies the value type for this resource property. When a resource property is passed to a
resource manager (e.g., File Server), the resource manager leverages the resource property value type to
determine how the resource property should be handled.
The full list of resource property value types can be retrieved by calling the Get-ADResourcePropertyValueType
cmdlet.
Example: Get-ADResourcePropertyValueType -Filter * | ft Name
Below is a list of the built-in resource property value types available in Active Directory:
- MS-DS-SinglevaluedChoice
- MS-DS-YesNo
- MS-DS-Number
- MS-DS-DateTime
- MS-DS-OrderedList
- MS-DS-Text
- MS-DS-MultivaluedText
- MS-DS-MultivaluedChoice
Required? true
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-SharesValuesWith <ADClaimType>
Use this parameter to create a reference resource property. Reference resource properties do not provide their
own suggested values, but rather use the suggested values from the claim type object specified in this
parameter. This enables the resource property to always remain valid for use in comparisons to its referred
claim type within a central access rule.
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-SuggestedValues <ADSuggestedValueEntry[]>
Specifies one or more suggested values for the resource property. An application may choose to present this
list of suggested values for the user to choose from. When RestrictValues is set to true, the application
should restrict the user to pick values from this list only.
Example:
$us = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("US", "United States of America",
"United States of America");
$jp = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("JP", "Japan", "Japan");
New-ADResourceProperty Country -ResourcePropertyValueType MS-DS-MultivaluedChoice -SuggestedValues $us,$jp
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADResourceProperty
OUTPUTS
None or Microsoft.ActiveDirectory.Management.ADResourceProperty
NOTES
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>New-ADResourceProperty Authors -ResourcePropertyValueType MS-DS-MultivaluedText
Description
-----------
Create a new resource property with display name 'Authors'. The resource property allows the names of multiple
authors to be specified.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>$us = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("US", "United States of
America", "United States of America");
$jp = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("JP", "Japan", "Japan");
New-ADResourceProperty Country -ResourcePropertyValueType MS-DS-MultivaluedChoice -SuggestedValues $us,$jp
Description
-----------
Create a new resource property with display name 'Country'. The suggested values are set to 'US' and 'JP'.
Applications using this resource property would allow their users to specify one of the suggested values as this
resource property's value.
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>New-ADResourceProperty Country -ResourcePropertyValueType MS-DS-MultivaluedChoice -SharesValuesWith Country
Description
-----------
Create a new reference resource property with display name 'Country'. It uses an existing claim type named
'Country' for its suggested values. This enables the resource property to be always valid for comparisons with the
referenced claim type in a central access rule.
-------------------------- EXAMPLE 4 --------------------------
C:\\PS>New-ADResourceProperty Authors -ResourcePropertyValueType MS-DS-MultivaluedText -ID Authors_60DB20331638
Description
-----------
Create a new resource property with display name 'Authors', and set its ID to 'Authors_60DB20331638'.
The ID should only be set manually in a multi-forest environment where the same resource property needs to work
across forests. By default, New-ADResourceProperty generates the ID automatically. For resource properties to be
considered identical across forests, their ID must be the same.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291074
Get-ADResourceProperty