< Back
Remove-ADResourcePropertyListMember
Post
NAME Remove-ADResourcePropertyListMember
SYNOPSIS
Removes one or more resource properties from a resource property list in Active Directory.
SYNTAX
Remove-ADResourcePropertyListMember [-Identity] <ADResourcePropertyList> [-Members] <ADResourceProperty[]>
[-AuthType {Negotiate | Basic}] [-Credential <PSCredential>] [-PassThru] [-Server <String>] [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The Remove-ADResourcePropertyListMember cmdlet can be used to remove one or more resource properties from a
resource property list in Active Directory.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADResourcePropertyList>
Specifies an Active Directory object by providing one of the following property values. The identifier in
parentheses is the LDAP display name for the attribute.
Distinguished Name
Example: CN=Country,CN=Resource Properties,CN=Claims
Configuration,CN=Services,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
This parameter can also get this object through the pipeline or you can set this parameter to an object
instance.
This example shows how to set this parameter to an ADObject object instance named "ADObjectInstance".
-Identity $ADObjectInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Members <ADResourceProperty[]>
Specifies a set of ADResourceProperty objects in a comma-separated list to add to a resource property list. To
identify each object, use one of the following property values. Note: The identifier in parentheses is the
LDAP display name.
Name
Example: Country
Distinguished Name
Example: CN=Country,CN=Resource Properties,CN=Claims
Configuration,CN=Services,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
You can also provide objects to this parameter directly.
The following examples show how to specify this parameter.
This example specifies two resource properties to add by specifying the distinguished name and the name
properties.
-Members "CN=Country,CN=Resource Properties,CN=Claims
Configuration,CN=Services,CN=Configuration,DC=corp,DC=contoso,DC=com", "Authors"
This example specifies two resource property object that are defined in the current Windows PowerShell session
as input for the parameter.
-Members $rpObject1, $rpObject2
You cannot pass objects through the pipeline to this parameter.
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADResourcePropertyList
An ADResourcePropertyList object is received by the Identity parameter.
OUTPUTS
None or Microsoft.ActiveDirectory.Management.ADResourcePropertyList
Returns the modified ADResourcePropertyList object when the PassThru parameter is specified. By default, this
cmdlet does not generate any output.
NOTES
This cmdlet does not work with a read-only domain controller.
This cmdlet does not work with an Active Directory Snapshot.
By default, this cmdlet has the -Confirm parameter set, which prompts you to confirm before a removal of the
specified object type can occur. To bypass prompting for confirmation before removal, you can specify
-Confirm:$false when using this cmdlet.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Remove-ADResourcePropertyListMember "Global Resource Property List" -Members Country
Description
-----------
Removes the resource property specified as a list member ("Country") from the specified resource property list
("Global Resource Property List").
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Remove-ADResourcePropertyListMember "Corporate Resource Property List" Department,Country
Description
-----------
Removes the resource properties named 'Department' and 'Country' from the resource property list ("Corporate
Resource Property List").
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>Get-ADResourcePropertyList -Filter { Name -like "Corporate*" } | Remove-ADResourcePropertyListMember
Department,Country
Description
-----------
Gets the resource property lists that have a name that begins with "Corporate" and then pipes it to
Remove-ADResourcePropertyListMember, which then removes the resource properties with the name 'Department' and
'Country' from it.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291099
SYNOPSIS
Removes one or more resource properties from a resource property list in Active Directory.
SYNTAX
Remove-ADResourcePropertyListMember [-Identity] <ADResourcePropertyList> [-Members] <ADResourceProperty[]>
[-AuthType {Negotiate | Basic}] [-Credential <PSCredential>] [-PassThru] [-Server <String>] [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The Remove-ADResourcePropertyListMember cmdlet can be used to remove one or more resource properties from a
resource property list in Active Directory.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADResourcePropertyList>
Specifies an Active Directory object by providing one of the following property values. The identifier in
parentheses is the LDAP display name for the attribute.
Distinguished Name
Example: CN=Country,CN=Resource Properties,CN=Claims
Configuration,CN=Services,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
This parameter can also get this object through the pipeline or you can set this parameter to an object
instance.
This example shows how to set this parameter to an ADObject object instance named "ADObjectInstance".
-Identity $ADObjectInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Members <ADResourceProperty[]>
Specifies a set of ADResourceProperty objects in a comma-separated list to add to a resource property list. To
identify each object, use one of the following property values. Note: The identifier in parentheses is the
LDAP display name.
Name
Example: Country
Distinguished Name
Example: CN=Country,CN=Resource Properties,CN=Claims
Configuration,CN=Services,CN=Configuration,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
You can also provide objects to this parameter directly.
The following examples show how to specify this parameter.
This example specifies two resource properties to add by specifying the distinguished name and the name
properties.
-Members "CN=Country,CN=Resource Properties,CN=Claims
Configuration,CN=Services,CN=Configuration,DC=corp,DC=contoso,DC=com", "Authors"
This example specifies two resource property object that are defined in the current Windows PowerShell session
as input for the parameter.
-Members $rpObject1, $rpObject2
You cannot pass objects through the pipeline to this parameter.
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADResourcePropertyList
An ADResourcePropertyList object is received by the Identity parameter.
OUTPUTS
None or Microsoft.ActiveDirectory.Management.ADResourcePropertyList
Returns the modified ADResourcePropertyList object when the PassThru parameter is specified. By default, this
cmdlet does not generate any output.
NOTES
This cmdlet does not work with a read-only domain controller.
This cmdlet does not work with an Active Directory Snapshot.
By default, this cmdlet has the -Confirm parameter set, which prompts you to confirm before a removal of the
specified object type can occur. To bypass prompting for confirmation before removal, you can specify
-Confirm:$false when using this cmdlet.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Remove-ADResourcePropertyListMember "Global Resource Property List" -Members Country
Description
-----------
Removes the resource property specified as a list member ("Country") from the specified resource property list
("Global Resource Property List").
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Remove-ADResourcePropertyListMember "Corporate Resource Property List" Department,Country
Description
-----------
Removes the resource properties named 'Department' and 'Country' from the resource property list ("Corporate
Resource Property List").
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>Get-ADResourcePropertyList -Filter { Name -like "Corporate*" } | Remove-ADResourcePropertyListMember
Department,Country
Description
-----------
Gets the resource property lists that have a name that begins with "Corporate" and then pipes it to
Remove-ADResourcePropertyListMember, which then removes the resource properties with the name 'Department' and
'Country' from it.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291099