< Back
Rename-ADObject
Post
NAME Rename-ADObject
SYNOPSIS
Changes the name of an Active Directory object.
SYNTAX
Rename-ADObject [-Identity] <ADObject> [-NewName] <String> [-AuthType {Negotiate | Basic}] [-Credential
<PSCredential>] [-Partition <String>] [-PassThru] [-Server <String>] [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Rename-ADObject cmdlet renames an Active Directory object. This cmdlet sets the Name property of an Active
Directory object that has an LDAP Display Name (ldapDisplayName) of "name". To modify the given name, surname and
other name of a user, use the Set-ADUser cmdlet. To modify the Security Accounts Manager (SAM) account name of a
user, computer, or group, use the Set-ADUser, Set-ADComputer or Set-ADGroup cmdlet.
The Identity parameter specifies the object to rename. You can identify an object or container by its
distinguished name (DN) or GUID. You can also set the Identity parameter to an object variable such as
$<localObject>, or you can pass an object through the pipeline to the Identity parameter. For example, you can use
the Get-ADObject cmdlet to retrieve an object and then pass the object through the pipeline to the Rename-ADObject
cmdlet. You can also use the Get-ADGroup, Get-ADUser, Get-ADComputer, Get-ADServiceAccount,
Get-ADOrganizationalUnit and Get-ADFineGrainedPasswordPolicy cmdlets to get an object that you can pass through
the pipeline to this cmdlet.
The NewName parameter defines the new name for the object and must be specified.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADObject>
Specifies an Active Directory object by providing one of the following property values. The identifier in
parentheses is the LDAP display name for the attribute.
Distinguished Name
Example: CN=saradavis,OU=users,OU=asia,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to an object
instance.
Derived types, such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADGroup
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
Microsoft.ActiveDirectory.Management.ADFineGrainedPasswordPolicy
Microsoft.ActiveDirectory.Management.ADDomain
This example shows how to set this parameter to an ADObject object instance named "ADObjectInstance".
-Identity $ADObjectInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-NewName <String>
Specifies the new name of the object. This parameter sets the Name property of the Active Directory object.
The LDAP Display Name (ldapDisplayName) of this property is "name".
The following example shows how to set this parameter to a name string.
-NewName "SaraDavis"
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Partition <String>
Specifies the distinguished name of an Active Directory partition. The distinguished name must be one of the
naming contexts on the current directory server. The cmdlet searches this partition to find the object defined
by the Identity parameter.
The following two examples show how to specify a value for this parameter.
-Partition "CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
-Partition "CN=Schema,CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
In many cases, a default value will be used for the Partition parameter if no value is specified. The rules
for determining the default value are given below. Note that rules listed first are evaluated first and once
a default value can be determined, no further rules will be evaluated.
In AD DS environments, a default value for Partition will be set in the following cases: - If the Identity
parameter is set to a distinguished name, the default value of Partition is automatically generated from this
distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If none of the previous cases apply, the default value of Partition will be set to the default partition or
naming context of the target domain.
In AD LDS environments, a default value for Partition will be set in the following cases:
- If the Identity parameter is set to a distinguished name, the default value of Partition is automatically
generated from this distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If the target AD LDS instance has a default naming context, the default value of Partition will be set to
the default naming context. To specify a default naming context for an AD LDS environment, set the
msDS-defaultNamingContext property of the Active Directory directory service agent (DSA) object (nTDSDSA) for
the AD LDS instance.
- If none of the previous cases apply, the Partition parameter will not take any default value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADObject
An Active Directory object is received by the Identity parameter.
Derived types, such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADGroup
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
Microsoft.ActiveDirectory.Management.ADOrganizationalUnit
Microsoft.ActiveDirectory.Management.ADFineGrainedPasswordPolicy
OUTPUTS
None
NOTES
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Rename-ADObject -Identity "CN=HQ,CN=Sites,CN=Configuration,DC=FABRIKAM,DC=COM" -NewName UnitedKingdomHQ
Description
-----------
Rename the name of an existing site 'HQ' to the new name 'UnitedKingdomHQ'. If the distinguished name is provided
in the -Identity parameter, then the -Partition parameter is not required.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Rename-ADObject -Identity "4777c8e8-cd29-4699-91e8-c507705a0966" -NewName "AmsterdamHQ" -Partition
"CN=Configuration,DC=FABRIKAM,DC=COM"
Description
-----------
Rename the object with objectGUID '4777c8e8-cd29-4699-91e8-c507705a096'6 to 'SiteNewName'. Note -Partition
parameter is required because the Naming Context of the site object is not known from the GUID provided to the
-Identity parameter.
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>Rename-ADObject "OU=ManagedGroups,OU=Managed,DC=Fabrikam,DC=Com" -NewName Groups
Description
-----------
Rename the object with the DistinguisehdName 'OU=ManagedGroups,OU=Managed,DC=Fabrikam,DC=Com' to 'Groups'.
-------------------------- EXAMPLE 4 --------------------------
C:\\PS>Rename-ADObject -Identity "4777c8e8-cd29-4699-91e8-c507705a0966" -NewName "DavidAhs"
Description
-----------
Rename the object with objectGUID '4777c8e8-cd29-4699-91e8-c507705a0966' to 'DavidAhs'. Note that the -Partition
parameter is not specified because the object is in the Default Naming Context of the domain.
-------------------------- EXAMPLE 5 --------------------------
C:\\PS>Rename-ADObject "CN=Apps,DC=AppNC" -NewName "InternalApps" -server "FABRIKAM-SRV1:60000"
Description
-----------
Rename the container 'CN=Apps,DC=AppNC' to 'InternalApps' in an LDS instance.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291102
Get-ADObject
Move-ADObject
New-ADObject
Remove-ADObject
Restore-ADObject
Set-ADObject
SYNOPSIS
Changes the name of an Active Directory object.
SYNTAX
Rename-ADObject [-Identity] <ADObject> [-NewName] <String> [-AuthType {Negotiate | Basic}] [-Credential
<PSCredential>] [-Partition <String>] [-PassThru] [-Server <String>] [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Rename-ADObject cmdlet renames an Active Directory object. This cmdlet sets the Name property of an Active
Directory object that has an LDAP Display Name (ldapDisplayName) of "name". To modify the given name, surname and
other name of a user, use the Set-ADUser cmdlet. To modify the Security Accounts Manager (SAM) account name of a
user, computer, or group, use the Set-ADUser, Set-ADComputer or Set-ADGroup cmdlet.
The Identity parameter specifies the object to rename. You can identify an object or container by its
distinguished name (DN) or GUID. You can also set the Identity parameter to an object variable such as
$<localObject>, or you can pass an object through the pipeline to the Identity parameter. For example, you can use
the Get-ADObject cmdlet to retrieve an object and then pass the object through the pipeline to the Rename-ADObject
cmdlet. You can also use the Get-ADGroup, Get-ADUser, Get-ADComputer, Get-ADServiceAccount,
Get-ADOrganizationalUnit and Get-ADFineGrainedPasswordPolicy cmdlets to get an object that you can pass through
the pipeline to this cmdlet.
The NewName parameter defines the new name for the object and must be specified.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADObject>
Specifies an Active Directory object by providing one of the following property values. The identifier in
parentheses is the LDAP display name for the attribute.
Distinguished Name
Example: CN=saradavis,OU=users,OU=asia,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to an object
instance.
Derived types, such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADGroup
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
Microsoft.ActiveDirectory.Management.ADFineGrainedPasswordPolicy
Microsoft.ActiveDirectory.Management.ADDomain
This example shows how to set this parameter to an ADObject object instance named "ADObjectInstance".
-Identity $ADObjectInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-NewName <String>
Specifies the new name of the object. This parameter sets the Name property of the Active Directory object.
The LDAP Display Name (ldapDisplayName) of this property is "name".
The following example shows how to set this parameter to a name string.
-NewName "SaraDavis"
Required? true
Position? 2
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Partition <String>
Specifies the distinguished name of an Active Directory partition. The distinguished name must be one of the
naming contexts on the current directory server. The cmdlet searches this partition to find the object defined
by the Identity parameter.
The following two examples show how to specify a value for this parameter.
-Partition "CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
-Partition "CN=Schema,CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"
In many cases, a default value will be used for the Partition parameter if no value is specified. The rules
for determining the default value are given below. Note that rules listed first are evaluated first and once
a default value can be determined, no further rules will be evaluated.
In AD DS environments, a default value for Partition will be set in the following cases: - If the Identity
parameter is set to a distinguished name, the default value of Partition is automatically generated from this
distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If none of the previous cases apply, the default value of Partition will be set to the default partition or
naming context of the target domain.
In AD LDS environments, a default value for Partition will be set in the following cases:
- If the Identity parameter is set to a distinguished name, the default value of Partition is automatically
generated from this distinguished name.
- If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically
generated from the current path in the drive.
- If the target AD LDS instance has a default naming context, the default value of Partition will be set to
the default naming context. To specify a default naming context for an AD LDS environment, set the
msDS-defaultNamingContext property of the Active Directory directory service agent (DSA) object (nTDSDSA) for
the AD LDS instance.
- If none of the previous cases apply, the Partition parameter will not take any default value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None or Microsoft.ActiveDirectory.Management.ADObject
An Active Directory object is received by the Identity parameter.
Derived types, such as the following are also accepted:
Microsoft.ActiveDirectory.Management.ADGroup
Microsoft.ActiveDirectory.Management.ADUser
Microsoft.ActiveDirectory.Management.ADComputer
Microsoft.ActiveDirectory.Management.ADServiceAccount
Microsoft.ActiveDirectory.Management.ADOrganizationalUnit
Microsoft.ActiveDirectory.Management.ADFineGrainedPasswordPolicy
OUTPUTS
None
NOTES
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Rename-ADObject -Identity "CN=HQ,CN=Sites,CN=Configuration,DC=FABRIKAM,DC=COM" -NewName UnitedKingdomHQ
Description
-----------
Rename the name of an existing site 'HQ' to the new name 'UnitedKingdomHQ'. If the distinguished name is provided
in the -Identity parameter, then the -Partition parameter is not required.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>Rename-ADObject -Identity "4777c8e8-cd29-4699-91e8-c507705a0966" -NewName "AmsterdamHQ" -Partition
"CN=Configuration,DC=FABRIKAM,DC=COM"
Description
-----------
Rename the object with objectGUID '4777c8e8-cd29-4699-91e8-c507705a096'6 to 'SiteNewName'. Note -Partition
parameter is required because the Naming Context of the site object is not known from the GUID provided to the
-Identity parameter.
-------------------------- EXAMPLE 3 --------------------------
C:\\PS>Rename-ADObject "OU=ManagedGroups,OU=Managed,DC=Fabrikam,DC=Com" -NewName Groups
Description
-----------
Rename the object with the DistinguisehdName 'OU=ManagedGroups,OU=Managed,DC=Fabrikam,DC=Com' to 'Groups'.
-------------------------- EXAMPLE 4 --------------------------
C:\\PS>Rename-ADObject -Identity "4777c8e8-cd29-4699-91e8-c507705a0966" -NewName "DavidAhs"
Description
-----------
Rename the object with objectGUID '4777c8e8-cd29-4699-91e8-c507705a0966' to 'DavidAhs'. Note that the -Partition
parameter is not specified because the object is in the Default Naming Context of the domain.
-------------------------- EXAMPLE 5 --------------------------
C:\\PS>Rename-ADObject "CN=Apps,DC=AppNC" -NewName "InternalApps" -server "FABRIKAM-SRV1:60000"
Description
-----------
Rename the container 'CN=Apps,DC=AppNC' to 'InternalApps' in an LDS instance.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291102
Get-ADObject
Move-ADObject
New-ADObject
Remove-ADObject
Restore-ADObject
Set-ADObject