< Back
Set-ADDomainMode
Post
NAME Set-ADDomainMode
SYNOPSIS
Sets the domain mode for an Active Directory domain.
SYNTAX
Set-ADDomainMode [-Identity] <ADDomain> [-DomainMode] {UnknownDomain | Windows2000Domain |
Windows2003InterimDomain | Windows2003Domain | Windows2008Domain | Windows2008R2Domain | Windows2012Domain |
Windows2012R2Domain} [-AuthType {Negotiate | Basic}] [-Credential <PSCredential>] [-PassThru] [-Server <String>]
[-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Set-ADDomainMode cmdlet sets the domain mode for a domain. You specify the domain mode by setting the
DomainMode parameter.
The domain mode can be set to the following values that are listed in order of functionality from lowest to
highest.
Windows2000Domain
Windows2003InterimDomain
Windows2003Domain
Windows2008Domain
Windows2008R2Domain
You can change the domain mode to a mode with higher functionality only. For example, if the domain mode for a
domain is set to Windows 2003, you can use this cmdlet to change the mode to Windows 2008. However, in the same
situation, you cannot use this cmdlet to change the domain mode from Windows 2003 to Windows 2000.
The Identity parameter specifies the Active Directory domain to modify. You can identify a domain by its
distinguished name (DN), GUID, security identifier (SID), DNS domain name, or NetBIOS name. You can also set the
Identity parameter to a domain object variable such as $<localADDomainObject>, or you can pass a domain object
through the pipeline to the Identity parameter. For example, you can use the Get-ADDomain cmdlet to retrieve a
domain object and then pass the object through the pipeline to the Set-ADDomainMode cmdlet.
The Set-ADDomainMode always prompts for permission unless you specify -confirm:$false.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DomainMode <ADDomainMode>
Specifies the domain mode for an Active Directory domain. You can set the domain mode to one of the following
values that are listed in order of functionality from least to most.
Windows2000Domain or 0
Windows2003InterimDomain or 1
Windows2003Domain or 2
Windows2008Domain or 3
Windows2008R2Domain or 4
The following example shows how to set this parameter to Windows 2008 R2.
-DomainMode Windows2008R2Domain
Required? true
Position? 3
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADDomain>
Specifies an Active Directory domain object by providing one of the following property values. The identifier
in parentheses is the LDAP display name for the attribute. All values are for the domainDNS object that
represents the domain.
Distinguished Name
Example: DC=redmond,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Security Identifier (objectSid)
Example: S-1-5-21-3165297888-301567370-
DNS domain name
Example: redmond.corp.contoso.com
NetBIOS domain name
Example: redmond
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to a domain object
instance.
This example shows how to set the parameter to a distinguished name.
-Identity "DC=redmond,DC=corp,DC=contoso,DC=com"
This example shows how to set this parameter to a domain object instance named "domainInstance".
-Identity $domainInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.ActiveDirectory.Management.ADDomain
A domain object is received by the Identity parameter.
OUTPUTS
None or Microsoft.ActiveDirectory.Management.ADDomain
Returns the modified domain object when the PassThru parameter is specified. By default, this cmdlet does not
generate any output.
NOTES
This cmdlet does not work with AD LDS.
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
This cmdlet does not work when connected to Global Catalog port.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Set-ADDomainMode -Identity fabrikam.com -DomainMode Windows2003Domain
Description
-----------
Set the DomainMode property of the fabrikam.com domain to Windows2003Domain.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>$pdc = Get-ADDomainController -Discover -Service PrimaryDC
Set-ADDomainMode -Identity $pdc.Domain -Server $pdc.HostName[0] -DomainMode Windows2003Domain
Description
-----------
Set the DomainMode of the current logged on user's domain to Windows2003Domain. The Set operation targets the
PrimaryDC FSMO to apply the update.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291117
Get-ADDomain
SYNOPSIS
Sets the domain mode for an Active Directory domain.
SYNTAX
Set-ADDomainMode [-Identity] <ADDomain> [-DomainMode] {UnknownDomain | Windows2000Domain |
Windows2003InterimDomain | Windows2003Domain | Windows2008Domain | Windows2008R2Domain | Windows2012Domain |
Windows2012R2Domain} [-AuthType {Negotiate | Basic}] [-Credential <PSCredential>] [-PassThru] [-Server <String>]
[-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Set-ADDomainMode cmdlet sets the domain mode for a domain. You specify the domain mode by setting the
DomainMode parameter.
The domain mode can be set to the following values that are listed in order of functionality from lowest to
highest.
Windows2000Domain
Windows2003InterimDomain
Windows2003Domain
Windows2008Domain
Windows2008R2Domain
You can change the domain mode to a mode with higher functionality only. For example, if the domain mode for a
domain is set to Windows 2003, you can use this cmdlet to change the mode to Windows 2008. However, in the same
situation, you cannot use this cmdlet to change the domain mode from Windows 2003 to Windows 2000.
The Identity parameter specifies the Active Directory domain to modify. You can identify a domain by its
distinguished name (DN), GUID, security identifier (SID), DNS domain name, or NetBIOS name. You can also set the
Identity parameter to a domain object variable such as $<localADDomainObject>, or you can pass a domain object
through the pipeline to the Identity parameter. For example, you can use the Get-ADDomain cmdlet to retrieve a
domain object and then pass the object through the pipeline to the Set-ADDomainMode cmdlet.
The Set-ADDomainMode always prompts for permission unless you specify -confirm:$false.
PARAMETERS
-AuthType <ADAuthType>
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
Required? false
Position? named
Default value Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept pipeline input? false
Accept wildcard characters? false
-Credential <PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the
credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell
provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the
default.
To specify this parameter, you can type a user name, such as "User1" or "Domain01\\User01" or you can specify a
PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can
then set the Credential parameter to the PSCredential object The following example shows how to create
credentials.
$AdminCredentials = Get-Credential "Domain01\\User01"
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory
PowerShell returns a terminating error.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DomainMode <ADDomainMode>
Specifies the domain mode for an Active Directory domain. You can set the domain mode to one of the following
values that are listed in order of functionality from least to most.
Windows2000Domain or 0
Windows2003InterimDomain or 1
Windows2003Domain or 2
Windows2008Domain or 3
Windows2008R2Domain or 4
The following example shows how to set this parameter to Windows 2008 R2.
-DomainMode Windows2008R2Domain
Required? true
Position? 3
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Identity <ADDomain>
Specifies an Active Directory domain object by providing one of the following property values. The identifier
in parentheses is the LDAP display name for the attribute. All values are for the domainDNS object that
represents the domain.
Distinguished Name
Example: DC=redmond,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Security Identifier (objectSid)
Example: S-1-5-21-3165297888-301567370-
DNS domain name
Example: redmond.corp.contoso.com
NetBIOS domain name
Example: redmond
The cmdlet searches the default naming context or partition to find the object. If two or more objects are
found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to a domain object
instance.
This example shows how to set the parameter to a distinguished name.
-Identity "DC=redmond,DC=corp,DC=contoso,DC=com"
This example shows how to set this parameter to a domain object instance named "domainInstance".
-Identity $domainInstance
Required? true
Position? 1
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not
generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Server <String>
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following
values for a corresponding domain name or directory server. The service may be any of the following: Active
Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that
they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running
under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server "corp.contoso.com"
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.ActiveDirectory.Management.ADDomain
A domain object is received by the Identity parameter.
OUTPUTS
None or Microsoft.ActiveDirectory.Management.ADDomain
Returns the modified domain object when the PassThru parameter is specified. By default, this cmdlet does not
generate any output.
NOTES
This cmdlet does not work with AD LDS.
This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
This cmdlet does not work when connected to Global Catalog port.
-------------------------- EXAMPLE 1 --------------------------
C:\\PS>Set-ADDomainMode -Identity fabrikam.com -DomainMode Windows2003Domain
Description
-----------
Set the DomainMode property of the fabrikam.com domain to Windows2003Domain.
-------------------------- EXAMPLE 2 --------------------------
C:\\PS>$pdc = Get-ADDomainController -Discover -Service PrimaryDC
Set-ADDomainMode -Identity $pdc.Domain -Server $pdc.HostName[0] -DomainMode Windows2003Domain
Description
-----------
Set the DomainMode of the current logged on user's domain to Windows2003Domain. The Set operation targets the
PrimaryDC FSMO to apply the update.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=291117
Get-ADDomain