< Back
New-AMSnmpCondition
Post
NAME New-AMSnmpCondition
SYNOPSIS
Creates a new AutoMate Enterprise SNMP condition.
SYNTAX
New-AMSnmpCondition [-Name] <String> [-IPStart <String>] [-IPEnd <String>] [-Community <String>] [-Enterprise
<String>] [-GenericType {Any | ColdStart | WarmStart | LinkDown | LinkUp | AuthenticationFailure | EGPNeighborLoss
| EnterpriseSpecific}] [-OIDStringNotation] [-TimetickStringNotation] [-AcceptUnathenticatedTrap] [-Wait]
[-Timeout <Int32>] [-TimeoutUnit {Seconds | Minutes | Hours | Days | Milliseconds}] [-TriggerAfter <Int32>]
[-Notes <String>] [-Folder <Object>] [-Connection <Object>] [-WhatIf] [-Confirm] [<CommonParameters>]
DESCRIPTION
New-AMSnmpCondition creates a new SNMP condition.
PARAMETERS
-Name <String>
The name of the new object.
Required? true
Position? 1
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPStart <String>
The starting IP address to filter SNMP requests from. Use "Any" for any IP address (default).
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-IPEnd <String>
The ending IP address to filter SNMP requests from. Use "Any" for any IP address (default).
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-Community <String>
Specifies whether the condition will start the task when a trap is received from a device from any community
(default) or only devices within a specific community.
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-Enterprise <String>
Specifies whether the condition will start the task when a trap is received from any Enterprise OID device
(default) or only devices within a specific Enterprise OID.
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-GenericType
Specifies that the condition will filter out traps that are not intended for a specific generic type and act
on traps received only from a specific generic type.
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-OIDStringNotation [<SwitchParameter>]
If specified, IODs will be entered as string notations.
Required? false
Position? named
Default value False
Accept pipeline input? false
Accept wildcard characters? false
-TimetickStringNotation [<SwitchParameter>]
If specified, timetick values will be entered as string notations.
Required? false
Position? named
Default value False
Accept pipeline input? false
Accept wildcard characters? false
-AcceptUnathenticatedTrap [<SwitchParameter>]
If specified, version 3 traps will be accepted.
Required? false
Position? named
Default value False
Accept pipeline input? false
Accept wildcard characters? false
-Wait [<SwitchParameter>]
Wait for the condition, or evaluate immediately.
Required? false
Position? named
Default value True
Accept pipeline input? false
Accept wildcard characters? false
-Timeout <Int32>
If wait is specified, the amount of time before the condition times out.
Required? false
Position? named
Default value 0
Accept pipeline input? false
Accept wildcard characters? false
-TimeoutUnit
The unit for Timeout (Seconds by default).
Required? false
Position? named
Default value Seconds
Accept pipeline input? false
Accept wildcard characters? false
-TriggerAfter <Int32>
The number of times the condition should occur before the trigger fires.
Required? false
Position? named
Default value 1
Accept pipeline input? false
Accept wildcard characters? false
-Notes <String>
The new notes to set on the object.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Folder <Object>
The folder to place the object in.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Connection <Object>
The server to create the object on.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
RELATED LINKS
https://github.com/AutomatePS/AutomatePS
SYNOPSIS
Creates a new AutoMate Enterprise SNMP condition.
SYNTAX
New-AMSnmpCondition [-Name] <String> [-IPStart <String>] [-IPEnd <String>] [-Community <String>] [-Enterprise
<String>] [-GenericType {Any | ColdStart | WarmStart | LinkDown | LinkUp | AuthenticationFailure | EGPNeighborLoss
| EnterpriseSpecific}] [-OIDStringNotation] [-TimetickStringNotation] [-AcceptUnathenticatedTrap] [-Wait]
[-Timeout <Int32>] [-TimeoutUnit {Seconds | Minutes | Hours | Days | Milliseconds}] [-TriggerAfter <Int32>]
[-Notes <String>] [-Folder <Object>] [-Connection <Object>] [-WhatIf] [-Confirm] [<CommonParameters>]
DESCRIPTION
New-AMSnmpCondition creates a new SNMP condition.
PARAMETERS
-Name <String>
The name of the new object.
Required? true
Position? 1
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPStart <String>
The starting IP address to filter SNMP requests from. Use "Any" for any IP address (default).
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-IPEnd <String>
The ending IP address to filter SNMP requests from. Use "Any" for any IP address (default).
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-Community <String>
Specifies whether the condition will start the task when a trap is received from a device from any community
(default) or only devices within a specific community.
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-Enterprise <String>
Specifies whether the condition will start the task when a trap is received from any Enterprise OID device
(default) or only devices within a specific Enterprise OID.
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-GenericType
Specifies that the condition will filter out traps that are not intended for a specific generic type and act
on traps received only from a specific generic type.
Required? false
Position? named
Default value Any
Accept pipeline input? false
Accept wildcard characters? false
-OIDStringNotation [<SwitchParameter>]
If specified, IODs will be entered as string notations.
Required? false
Position? named
Default value False
Accept pipeline input? false
Accept wildcard characters? false
-TimetickStringNotation [<SwitchParameter>]
If specified, timetick values will be entered as string notations.
Required? false
Position? named
Default value False
Accept pipeline input? false
Accept wildcard characters? false
-AcceptUnathenticatedTrap [<SwitchParameter>]
If specified, version 3 traps will be accepted.
Required? false
Position? named
Default value False
Accept pipeline input? false
Accept wildcard characters? false
-Wait [<SwitchParameter>]
Wait for the condition, or evaluate immediately.
Required? false
Position? named
Default value True
Accept pipeline input? false
Accept wildcard characters? false
-Timeout <Int32>
If wait is specified, the amount of time before the condition times out.
Required? false
Position? named
Default value 0
Accept pipeline input? false
Accept wildcard characters? false
-TimeoutUnit
The unit for Timeout (Seconds by default).
Required? false
Position? named
Default value Seconds
Accept pipeline input? false
Accept wildcard characters? false
-TriggerAfter <Int32>
The number of times the condition should occur before the trigger fires.
Required? false
Position? named
Default value 1
Accept pipeline input? false
Accept wildcard characters? false
-Notes <String>
The new notes to set on the object.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Folder <Object>
The folder to place the object in.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Connection <Object>
The server to create the object on.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
RELATED LINKS
https://github.com/AutomatePS/AutomatePS