< Back
Reset-DAEntryPointTableItem
Post
NAME Reset-DAEntryPointTableItem
SYNOPSIS
Resets the specified DirectAccess entry point configuration to the default configuration.
SYNTAX
Reset-DAEntryPointTableItem [-AsJob] [-CimSession <CimSession[]>] [-EntryPointName <String[]>] [-GslbIP] [-IPHttpsProfile] [-PassThru]
[-TeredoServerIP] [-ThrottleLimit <Int32>] -PolicyStore <String> [-Confirm] [-WhatIf] [<CommonParameters>]
Reset-DAEntryPointTableItem [-AsJob] [-CimSession <CimSession[]>] [-EntryPointName <String[]>] [-GslbIP] [-IPHttpsProfile] [-PassThru]
[-TeredoServerIP] [-ThrottleLimit <Int32>] -GPOSession <String> [-Confirm] [-WhatIf] [<CommonParameters>]
Reset-DAEntryPointTableItem [-AsJob] [-CimSession <CimSession[]>] [-GslbIP] [-IPHttpsProfile] [-PassThru] [-TeredoServerIP] [-ThrottleLimit
<Int32>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
Reset-DAEntryPointTableItem resets the configuration of the entry point specified by EntryPointName to the default configuration. You can use the
optional parameters to reset specific configuration settings to the default configuration.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-EntryPointName <String[]>
Specifies the name of the entry point to modify. The entry point name is usually the friendly name of the location, such as "Redmond" or
"Paris".
Specify the name of the entry point by using double quotes ( ??????? ???????).
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-GPOSession <String>
Specifies the Group Policy session to send configuration information. You can use GPOSession with the NetGPO cmdlets to aggregate multiple
operations performed on a Group Policy Object.
GPOSession cannot be used in conjunction with PolicyStore.
Required? true
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-GslbIP [<SwitchParameter>]
Resets the global server load balancing (GSLB) IP of the specified sites to a non-configured state.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the name of the object to modify.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IPHttpsProfile [<SwitchParameter>]
Resets the IpHTTPsProfile property of the specified sites to a non-configured state. For more information about IPHTTPs profiles, see the
NetIPHTTPsConfiguration cmdlets in the NetworkTransition module.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Sends items from an interactive window down the pipeline as input to other cmdlets. By default, this cmdlet does not generate any output.
However, to send items from the interactive window down the pipeline, click to select the items and then click OK. Shift-click and Ctrl-click
are supported.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store into which the cmdlet adds the entry point.
To add the entry point to a Group Policy Object, specify the GPO name using the following format: "Domain\\GPOName"
To add the entry point information to a computer????????s local GPO, specify the computer????????s local GPO name in the following format:
"GPO:<computername>"
PolicyStore cannot be used in conjunction with GPOSession.
Required? true
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-TeredoServerIP [<SwitchParameter>]
Resets the TeredoServerIP property of the specified sites to a non-configured state.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root/StandardCimv2/MSFT_DASiteTableEntry
This cmdlet accepts as input a CIM object which contains a DA site table entry.
OUTPUTS
This cmdlet produces no output.
Example: Reset an entry point property
PS C:\\> Reset-DAEntryPointTableItem ????????GslbIP -EntryPointName "Paris" -PolicyStore "Contoso\\GPO1"
This cmdlet resets the GslbIP property to not-configured for the Paris entry point.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287317
New-DAEntryPointTableItem
Get-DAEntryPointTableItem
Reset-DAEntryPointTableItem
Rename-DAEntryPointTableItem
Remove-DAEntryPointTableItem
SYNOPSIS
Resets the specified DirectAccess entry point configuration to the default configuration.
SYNTAX
Reset-DAEntryPointTableItem [-AsJob] [-CimSession <CimSession[]>] [-EntryPointName <String[]>] [-GslbIP] [-IPHttpsProfile] [-PassThru]
[-TeredoServerIP] [-ThrottleLimit <Int32>] -PolicyStore <String> [-Confirm] [-WhatIf] [<CommonParameters>]
Reset-DAEntryPointTableItem [-AsJob] [-CimSession <CimSession[]>] [-EntryPointName <String[]>] [-GslbIP] [-IPHttpsProfile] [-PassThru]
[-TeredoServerIP] [-ThrottleLimit <Int32>] -GPOSession <String> [-Confirm] [-WhatIf] [<CommonParameters>]
Reset-DAEntryPointTableItem [-AsJob] [-CimSession <CimSession[]>] [-GslbIP] [-IPHttpsProfile] [-PassThru] [-TeredoServerIP] [-ThrottleLimit
<Int32>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
Reset-DAEntryPointTableItem resets the configuration of the entry point specified by EntryPointName to the default configuration. You can use the
optional parameters to reset specific configuration settings to the default configuration.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-EntryPointName <String[]>
Specifies the name of the entry point to modify. The entry point name is usually the friendly name of the location, such as "Redmond" or
"Paris".
Specify the name of the entry point by using double quotes ( ??????? ???????).
Required? false
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-GPOSession <String>
Specifies the Group Policy session to send configuration information. You can use GPOSession with the NetGPO cmdlets to aggregate multiple
operations performed on a Group Policy Object.
GPOSession cannot be used in conjunction with PolicyStore.
Required? true
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-GslbIP [<SwitchParameter>]
Resets the global server load balancing (GSLB) IP of the specified sites to a non-configured state.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the name of the object to modify.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IPHttpsProfile [<SwitchParameter>]
Resets the IpHTTPsProfile property of the specified sites to a non-configured state. For more information about IPHTTPs profiles, see the
NetIPHTTPsConfiguration cmdlets in the NetworkTransition module.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Sends items from an interactive window down the pipeline as input to other cmdlets. By default, this cmdlet does not generate any output.
However, to send items from the interactive window down the pipeline, click to select the items and then click OK. Shift-click and Ctrl-click
are supported.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store into which the cmdlet adds the entry point.
To add the entry point to a Group Policy Object, specify the GPO name using the following format: "Domain\\GPOName"
To add the entry point information to a computer????????s local GPO, specify the computer????????s local GPO name in the following format:
"GPO:<computername>"
PolicyStore cannot be used in conjunction with GPOSession.
Required? true
Position? named
Default value
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-TeredoServerIP [<SwitchParameter>]
Resets the TeredoServerIP property of the specified sites to a non-configured state.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root/StandardCimv2/MSFT_DASiteTableEntry
This cmdlet accepts as input a CIM object which contains a DA site table entry.
OUTPUTS
This cmdlet produces no output.
Example: Reset an entry point property
PS C:\\> Reset-DAEntryPointTableItem ????????GslbIP -EntryPointName "Paris" -PolicyStore "Contoso\\GPO1"
This cmdlet resets the GslbIP property to not-configured for the Paris entry point.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287317
New-DAEntryPointTableItem
Get-DAEntryPointTableItem
Reset-DAEntryPointTableItem
Rename-DAEntryPointTableItem
Remove-DAEntryPointTableItem