< Back
Add-WindowsImage
Post
NAME Add-WindowsImage
SYNOPSIS
Adds an additional image to an existing image (.wim) file.
SYNTAX
Add-WindowsImage [-CheckIntegrity] [-ConfigFilePath <String>] [-Description <String>] [-LogLevel {Errors | Warnings | WarningsInfo}] [-LogPath
<String>] [-NoRpFix] [-ScratchDirectory <String>] [-Setbootable] [-Verify] [-WIMBoot] -CapturePath <String> -ImagePath <String> -Name <String>
[<CommonParameters>]
DESCRIPTION
The Add-WindowsImage cmdlet adds an additional image to an existing image (.wim) file. Add-WindowsImage compares new files to the resources in the
existing .wim file, specified by the Name parameter and the ImagePath parameter, and stores only a single copy of each unique file so that each
file is only captured once. The .wim file can have only one assigned compression type. Therefore, you can only append files with the same
compression type.
The Add-WindowsImage cmdlet does not apply to virtual hard disk (VHD) files.
It's important to note that you'll need to ensure you have enough disk space before you run Add-WindowsImage. If you run out of disk space while
the image is being appended, you might corrupt the .wim file.
PARAMETERS
-CapturePath <String>
Specifies the path to the location of the new files that will be compared to the resources in the existing .wim file.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-CheckIntegrity [<SwitchParameter>]
Detects and tracks .wim file corruption when used with the Add????????WindowsImage, Dismount-WindowsImage or Save-WindowsImage cmdlet. CheckIntegrity
stops the operation if DISM detects that the .wim file is corrupted when used with the Expand-WindowsImage or Mount-WindowsImage cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ConfigFilePath [<String>]
Specifies the location of a configuration file that lists exclusions for image capture and compress commands. For more information, see DISM
Configuration List and WimScrit.ini Files, http://go.microsoft.com/fwlink/?LinkID=313768.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Description [<String>]
Specifies the description of the image to be captured.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ImagePath <String>
Specifies the location of the WIM file containing the Windows image you want to compare against the new files.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogLevel [<LogLevel>]
Specifies the maximum output level shown in the logs. The default log level is 3. The accepted values are as follows:
1 = Errors only
2 = Errors and warnings
3 = Errors, warnings, and information
4 = All of the information listed previously, plus debug output
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogPath [<String>]
Specifies the full path and file name to log to. If not set, the default is %WINDIR%\\Logs\\Dism\\dism.log.
In Windows PE, the default directory is the RAMDISK scratch space which can be as low as 32 MB. The log file will automatically be archived.
The archived log file will be saved with .bak appended to the file name and a new log file will be generated. Each time the log file is
archived the .bak file will be overwritten.
When using a network share that is not joined to a domain, use the net use command together with domain credentials to set access permissions
before you set the log path for the DISM log.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Name <String>
Specifies the name of an image in a WIM file.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-NoRpFix [<SwitchParameter>]
Disables the reparse point tag fix. A reparse point is a file that contains a link to another file on the file system. If the parameter is not
specified, reparse points that resolve to paths outside of the value specified by the ImagePath parameter will not be captured.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ScratchDirectory [<String>]
Specifies a temporary directory that will be used when extracting files for use during servicing. The directory must exist locally. If not
specified, the \\Windows\\%Temp% directory will be used, with a subdirectory name of a randomly generated hexadecimal value for each run of
DISM. Items in the scratch directory are deleted after each operation.
You should not use a network share location as a scratch directory to expand a package (.cab or .msu file) for installation. The directory
used for extracting files for temporary usage during servicing should be a local directory.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Setbootable [<SwitchParameter>]
Marks a volume image as being a bootable image. This argument is available only for Windows PE images. Only one volume image can be marked as
bootable in a .wim file.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Verify [<SwitchParameter>]
Checks for errors and file duplication.
During an apply operation, for example, using the Add-WindowsImage cmdlet, the size and the hash of the file being applied are checked
against the image file to verify they are both equal.
During a capture operation, for example, when using the New-WindowsImage cmdlet, after the files is captured into a Windows image, the file
is written to a temporary file and compared on a bit-by-bit basis with the original file.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-WIMBoot [<SwitchParameter>]
Specifies that the offline image to be added will be formatted to install on a Windows Image Format Boot (WIMBoot) system.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
System.String[]
Microsoft.Dism.Commands.ImageObject
Microsoft.Dism.Commands.ImageObjectWithState
OUTPUTS
Microsoft.Dism.Commands.OfflineImageObject
Example 1: Add files to an image
PS C:\\>Add-WindowsImage -ImagePath "C:\\imagestore\\custom.wim" -CapturePath d:\\ -Name "Drive D"
This command adds files from d:\\"Drive D" to the existing image at c:\\imagestore\\custom.wim.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=273947
Dismount-WindowsImage
Expand-WindowsImage
Export-WindowsImage
Get-WindowsImage
Dismount-WindowsImage
New-WindowsImage
Remove-WindowsImage
Repair-WindowsImage
Save-WindowsImage
Split-WindowsImage
SYNOPSIS
Adds an additional image to an existing image (.wim) file.
SYNTAX
Add-WindowsImage [-CheckIntegrity] [-ConfigFilePath <String>] [-Description <String>] [-LogLevel {Errors | Warnings | WarningsInfo}] [-LogPath
<String>] [-NoRpFix] [-ScratchDirectory <String>] [-Setbootable] [-Verify] [-WIMBoot] -CapturePath <String> -ImagePath <String> -Name <String>
[<CommonParameters>]
DESCRIPTION
The Add-WindowsImage cmdlet adds an additional image to an existing image (.wim) file. Add-WindowsImage compares new files to the resources in the
existing .wim file, specified by the Name parameter and the ImagePath parameter, and stores only a single copy of each unique file so that each
file is only captured once. The .wim file can have only one assigned compression type. Therefore, you can only append files with the same
compression type.
The Add-WindowsImage cmdlet does not apply to virtual hard disk (VHD) files.
It's important to note that you'll need to ensure you have enough disk space before you run Add-WindowsImage. If you run out of disk space while
the image is being appended, you might corrupt the .wim file.
PARAMETERS
-CapturePath <String>
Specifies the path to the location of the new files that will be compared to the resources in the existing .wim file.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-CheckIntegrity [<SwitchParameter>]
Detects and tracks .wim file corruption when used with the Add????????WindowsImage, Dismount-WindowsImage or Save-WindowsImage cmdlet. CheckIntegrity
stops the operation if DISM detects that the .wim file is corrupted when used with the Expand-WindowsImage or Mount-WindowsImage cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ConfigFilePath [<String>]
Specifies the location of a configuration file that lists exclusions for image capture and compress commands. For more information, see DISM
Configuration List and WimScrit.ini Files, http://go.microsoft.com/fwlink/?LinkID=313768.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Description [<String>]
Specifies the description of the image to be captured.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ImagePath <String>
Specifies the location of the WIM file containing the Windows image you want to compare against the new files.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogLevel [<LogLevel>]
Specifies the maximum output level shown in the logs. The default log level is 3. The accepted values are as follows:
1 = Errors only
2 = Errors and warnings
3 = Errors, warnings, and information
4 = All of the information listed previously, plus debug output
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogPath [<String>]
Specifies the full path and file name to log to. If not set, the default is %WINDIR%\\Logs\\Dism\\dism.log.
In Windows PE, the default directory is the RAMDISK scratch space which can be as low as 32 MB. The log file will automatically be archived.
The archived log file will be saved with .bak appended to the file name and a new log file will be generated. Each time the log file is
archived the .bak file will be overwritten.
When using a network share that is not joined to a domain, use the net use command together with domain credentials to set access permissions
before you set the log path for the DISM log.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Name <String>
Specifies the name of an image in a WIM file.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-NoRpFix [<SwitchParameter>]
Disables the reparse point tag fix. A reparse point is a file that contains a link to another file on the file system. If the parameter is not
specified, reparse points that resolve to paths outside of the value specified by the ImagePath parameter will not be captured.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ScratchDirectory [<String>]
Specifies a temporary directory that will be used when extracting files for use during servicing. The directory must exist locally. If not
specified, the \\Windows\\%Temp% directory will be used, with a subdirectory name of a randomly generated hexadecimal value for each run of
DISM. Items in the scratch directory are deleted after each operation.
You should not use a network share location as a scratch directory to expand a package (.cab or .msu file) for installation. The directory
used for extracting files for temporary usage during servicing should be a local directory.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Setbootable [<SwitchParameter>]
Marks a volume image as being a bootable image. This argument is available only for Windows PE images. Only one volume image can be marked as
bootable in a .wim file.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Verify [<SwitchParameter>]
Checks for errors and file duplication.
During an apply operation, for example, using the Add-WindowsImage cmdlet, the size and the hash of the file being applied are checked
against the image file to verify they are both equal.
During a capture operation, for example, when using the New-WindowsImage cmdlet, after the files is captured into a Windows image, the file
is written to a temporary file and compared on a bit-by-bit basis with the original file.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-WIMBoot [<SwitchParameter>]
Specifies that the offline image to be added will be formatted to install on a Windows Image Format Boot (WIMBoot) system.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
System.String[]
Microsoft.Dism.Commands.ImageObject
Microsoft.Dism.Commands.ImageObjectWithState
OUTPUTS
Microsoft.Dism.Commands.OfflineImageObject
Example 1: Add files to an image
PS C:\\>Add-WindowsImage -ImagePath "C:\\imagestore\\custom.wim" -CapturePath d:\\ -Name "Drive D"
This command adds files from d:\\"Drive D" to the existing image at c:\\imagestore\\custom.wim.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=273947
Dismount-WindowsImage
Expand-WindowsImage
Export-WindowsImage
Get-WindowsImage
Dismount-WindowsImage
New-WindowsImage
Remove-WindowsImage
Repair-WindowsImage
Save-WindowsImage
Split-WindowsImage