< Back
Disable-WindowsOptionalFeature
Post
NAME Disable-WindowsOptionalFeature
SYNOPSIS
Disables a feature in a Windows image.
SYNTAX
Disable-WindowsOptionalFeature [-LogLevel {Errors | Warnings | WarningsInfo}] [-LogPath <String>] [-NoRestart] [-PackageName <String>] [-Remove]
[-ScratchDirectory <String>] [-SystemDrive <String>] [-WindowsDirectory <String>] -FeatureName <String[]> -Online [<CommonParameters>]
Disable-WindowsOptionalFeature [-LogLevel {Errors | Warnings | WarningsInfo}] [-LogPath <String>] [-NoRestart] [-PackageName <String>] [-Remove]
[-ScratchDirectory <String>] [-SystemDrive <String>] [-WindowsDirectory <String>] -FeatureName <String[]> -Path <String> [<CommonParameters>]
DESCRIPTION
The Disable-WindowsOptionalFeature cmdlet disables or removes an optional feature in a Windows image.
Use the Online parameter to specify the running operating system on your local computer, or use the Path parameter to specify the location of a
mounted Windows image.
The PackageName parameter specifies the package that the feature is a component of. This parameter is optional when the package is the Windows
Foundation package.
The FeatureName parameter specifies the feature to remove. You can specify more than one feature in the same package. Separate feature names with
a comma.
The Remove parameter removes the files for an optional feature without removing the feature's manifest from the image. You can use Remove to
reduce the disk space that is used by a Windows image. After the image has been installed, you can restore the feature at any time from a remote
source such as WindowsUpdate or a network share. For more information about Features on Demand, see Configure a Windows Repair Source
(http://go.microsoft.com/fwlink/?LinkId=243077) in the TechNet Library.
PARAMETERS
-FeatureName <String[]>
Specifies the name of the feature to be disabled. Feature names are case sensitive if you are servicing a Windows image other than Windows???? 8
or a later version. You can use Get-WindowsOptionalFeature to find the name of the feature in the image.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogLevel [<LogLevel>]
Specifies the maximum output level shown in the logs. The default log level is 3. The accepted values are as follows:
1 = Errors only
2 = Errors and warnings
3 = Errors, warnings, and information
4 = All of the information listed previously, plus debug output
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogPath [<String>]
Specifies the full path and file name to log to. If not set, the default is %WINDIR%\\Logs\\Dism\\dism.log.
In Windows PE, the default directory is the RAMDISK scratch space which can be as low as 32 MB. The log file will automatically be archived.
The archived log file will be saved with .bak appended to the file name and a new log file will be generated. Each time the log file is
archived the .bak file will be overwritten.
When using a network share that is not joined to a domain, use the net use command together with domain credentials to set access permissions
before you set the log path for the DISM log.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-NoRestart [<SwitchParameter>]
Suppresses reboot. If a reboot is not required, this command does nothing. This option will keep the application from prompting for a restart
or keep it from restarting automatically.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Online <SwitchParameter>
Specifies that the action is to be taken on the operating system that is currently running on the local computer.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-PackageName [<String>]
dep_dism_ps_packagename
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Path <String>
Specifies the full path to the root directory of the offline Windows image that you will service. If the directory named Windows is not a
subdirectory of the root directory, -WindowsDirectory must be specified.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Remove [<SwitchParameter>]
Removes the files for an optional feature without removing the feature's manifest from the image. You can use Remove to reduce the disk space
that is used by a Windows image. After the image has been installed, you can restore the feature at any time from a remote source such as
WindowsUpdate or a network share.
Remove can only be used when servicing an image contain Windows 8 or Windows Server 2012 or a later version.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ScratchDirectory [<String>]
Specifies a temporary directory that will be used when extracting files for use during servicing. The directory must exist locally. If not
specified, the \\Windows\\%Temp% directory will be used, with a subdirectory name of a randomly generated hexadecimal value for each run of
DISM. Items in the scratch directory are deleted after each operation.
You should not use a network share location as a scratch directory to expand a package (.cab or .msu file) for installation. The directory
used for extracting files for temporary usage during servicing should be a local directory.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-SystemDrive [<String>]
Specifies the path to the location of the BootMgr files. This is necessary only when the BootMgr files are located on a partition other than
the one that you are running the command from. Use -SystemDrive to service an installed Windows image from a Windows PE environment.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-WindowsDirectory [<String>]
Specifies the path to the Windows directory relative to the image path. This cannot be the full path to the Windows directory; it should be a
relative path. If not specified, the default is the Windows directory in the root of the offline image directory.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
System.String[]
Microsoft.Dism.Commands.ImageObject
Microsoft.Dism.Commands.BasicFeatureObject
Microsoft.Dism.Commands.AdvancedFeatureObject
OUTPUTS
Microsoft.Dism.Commands.ImageObject
Example 1: Disable an optional feature
PS C:\\>Disable-WindowsOptionalFeature ????????Online ????????FeatureName "Hearts"
This command disables an optional feature, Hearts, from the running Windows operating system.
Example 2: Disable a feature in an image
PS C:\\>Disable-WindowsOptionalFeature ????????Path "c:\\offline" ????????FeatureName "Calc" ????????PackageName
"Microsoft.Windows.Calc.Demo~6595b6144ccf1df~x86~en~1.0.0.0" -Remove
This command disables the optional feature, Calc, in the specified package in the Windows image that is mounted to c:\\offline. It also removes all
of the files except the manifest file, which reduces the size of the Windows image. The feature can be restored with the
Enable-WindowsOptionalFeature cmdlet or by using Features on Demand at any time after the image is deployed.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=289351
Enable-WindowsOptionalFeature
Get-WindowsOptionalFeature
Remove-WindowsPackage
SYNOPSIS
Disables a feature in a Windows image.
SYNTAX
Disable-WindowsOptionalFeature [-LogLevel {Errors | Warnings | WarningsInfo}] [-LogPath <String>] [-NoRestart] [-PackageName <String>] [-Remove]
[-ScratchDirectory <String>] [-SystemDrive <String>] [-WindowsDirectory <String>] -FeatureName <String[]> -Online [<CommonParameters>]
Disable-WindowsOptionalFeature [-LogLevel {Errors | Warnings | WarningsInfo}] [-LogPath <String>] [-NoRestart] [-PackageName <String>] [-Remove]
[-ScratchDirectory <String>] [-SystemDrive <String>] [-WindowsDirectory <String>] -FeatureName <String[]> -Path <String> [<CommonParameters>]
DESCRIPTION
The Disable-WindowsOptionalFeature cmdlet disables or removes an optional feature in a Windows image.
Use the Online parameter to specify the running operating system on your local computer, or use the Path parameter to specify the location of a
mounted Windows image.
The PackageName parameter specifies the package that the feature is a component of. This parameter is optional when the package is the Windows
Foundation package.
The FeatureName parameter specifies the feature to remove. You can specify more than one feature in the same package. Separate feature names with
a comma.
The Remove parameter removes the files for an optional feature without removing the feature's manifest from the image. You can use Remove to
reduce the disk space that is used by a Windows image. After the image has been installed, you can restore the feature at any time from a remote
source such as WindowsUpdate or a network share. For more information about Features on Demand, see Configure a Windows Repair Source
(http://go.microsoft.com/fwlink/?LinkId=243077) in the TechNet Library.
PARAMETERS
-FeatureName <String[]>
Specifies the name of the feature to be disabled. Feature names are case sensitive if you are servicing a Windows image other than Windows???? 8
or a later version. You can use Get-WindowsOptionalFeature to find the name of the feature in the image.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogLevel [<LogLevel>]
Specifies the maximum output level shown in the logs. The default log level is 3. The accepted values are as follows:
1 = Errors only
2 = Errors and warnings
3 = Errors, warnings, and information
4 = All of the information listed previously, plus debug output
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-LogPath [<String>]
Specifies the full path and file name to log to. If not set, the default is %WINDIR%\\Logs\\Dism\\dism.log.
In Windows PE, the default directory is the RAMDISK scratch space which can be as low as 32 MB. The log file will automatically be archived.
The archived log file will be saved with .bak appended to the file name and a new log file will be generated. Each time the log file is
archived the .bak file will be overwritten.
When using a network share that is not joined to a domain, use the net use command together with domain credentials to set access permissions
before you set the log path for the DISM log.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-NoRestart [<SwitchParameter>]
Suppresses reboot. If a reboot is not required, this command does nothing. This option will keep the application from prompting for a restart
or keep it from restarting automatically.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Online <SwitchParameter>
Specifies that the action is to be taken on the operating system that is currently running on the local computer.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-PackageName [<String>]
dep_dism_ps_packagename
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Path <String>
Specifies the full path to the root directory of the offline Windows image that you will service. If the directory named Windows is not a
subdirectory of the root directory, -WindowsDirectory must be specified.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Remove [<SwitchParameter>]
Removes the files for an optional feature without removing the feature's manifest from the image. You can use Remove to reduce the disk space
that is used by a Windows image. After the image has been installed, you can restore the feature at any time from a remote source such as
WindowsUpdate or a network share.
Remove can only be used when servicing an image contain Windows 8 or Windows Server 2012 or a later version.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ScratchDirectory [<String>]
Specifies a temporary directory that will be used when extracting files for use during servicing. The directory must exist locally. If not
specified, the \\Windows\\%Temp% directory will be used, with a subdirectory name of a randomly generated hexadecimal value for each run of
DISM. Items in the scratch directory are deleted after each operation.
You should not use a network share location as a scratch directory to expand a package (.cab or .msu file) for installation. The directory
used for extracting files for temporary usage during servicing should be a local directory.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-SystemDrive [<String>]
Specifies the path to the location of the BootMgr files. This is necessary only when the BootMgr files are located on a partition other than
the one that you are running the command from. Use -SystemDrive to service an installed Windows image from a Windows PE environment.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-WindowsDirectory [<String>]
Specifies the path to the Windows directory relative to the image path. This cannot be the full path to the Windows directory; it should be a
relative path. If not specified, the default is the Windows directory in the root of the offline image directory.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
System.String[]
Microsoft.Dism.Commands.ImageObject
Microsoft.Dism.Commands.BasicFeatureObject
Microsoft.Dism.Commands.AdvancedFeatureObject
OUTPUTS
Microsoft.Dism.Commands.ImageObject
Example 1: Disable an optional feature
PS C:\\>Disable-WindowsOptionalFeature ????????Online ????????FeatureName "Hearts"
This command disables an optional feature, Hearts, from the running Windows operating system.
Example 2: Disable a feature in an image
PS C:\\>Disable-WindowsOptionalFeature ????????Path "c:\\offline" ????????FeatureName "Calc" ????????PackageName
"Microsoft.Windows.Calc.Demo~6595b6144ccf1df~x86~en~1.0.0.0" -Remove
This command disables the optional feature, Calc, in the specified package in the Windows image that is mounted to c:\\offline. It also removes all
of the files except the manifest file, which reduces the size of the Windows image. The feature can be restored with the
Enable-WindowsOptionalFeature cmdlet or by using Features on Demand at any time after the image is deployed.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/p/?linkid=289351
Enable-WindowsOptionalFeature
Get-WindowsOptionalFeature
Remove-WindowsPackage