< Back
Remove-DnsClientNrptRule
Post
NAME Remove-DnsClientNrptRule
SYNOPSIS
Removes the specified DNS client NRPT rule.
SYNTAX
Remove-DnsClientNrptRule [-Name] <String> [-CimSession <CimSession[]>] [-Force] [-GpoName <String>] [-PassThru] [-Server <String>] [-ThrottleLimit
<Int32>] [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Remove-DnsClientNrptRule cmdlet removes the specified DNS client Name Resolution Policy Table (NRPT) rule.
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Force [<SwitchParameter>]
Forces the command to run without asking for user confirmation.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-GpoName [<String>]
Specifies the name of the Group Policy Object (GPO).
-- If this parameter and the Server parameter are specified, then the NRPT rule is added in the GPO of domain. The Server parameter specifies
the domain controller (DC).
-- If neither this parameter nor the Server parameter is specified, then the NRPT rule is added for local client computer.
-- If this parameter is specified and the Server parameter is not specified, then the DC of the domain specified by this parameter value is
found and NRPT rule is added to the GPO.
-- If this parameter is not specified and the Server parameter is specified, then an error is displayed.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Name <String>
Specifies the name which uniquely identifies a rule.
Required? true
Position? 2
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Server [<String>]
Specifies the name of the server containing the GPO. This parameter is only applicable with the GpoName parameter.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DNS/DnsClientNrptRule
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DNS/DnsClientNrptRule
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The DnsClientNrptRule object contains all of the properties of the DNS client NRPT rule.
Example 1: Remove an NRPT rule from a specified server
PS C:\\>Remove-DnsClientNrptRule -GpoName "TestGPO" -Name "{1326d9d0-4fb5-4fed-9f67-f53637b85010}" -PassThru -Server "host1.com" -Force
This example removes the NRPT rule named {1326d9d0-4fb5-4fed-9f67-f53637b85010} on the server named host1.com.
Example 2: Remove an NRPT rule
PS C:\\>Remove-DnsClientNrptRule -Name "DA-{274D94E4-E38B-4997-BA9F-84700712C09E}" -PassThru
Confirm
Removing NRPT rule for the namespace nls.corp.contoso.com with
DAEnable: Enable,
DnsSecValidationRequired: Disabled,
NameEncoding: Disable
NameServers: No
Do you want to continue?
[Y] Yes [N] No [S] Suspend [?] Help (default is "Y"): Y
Name : DA-{274D94E4-E38B-4997-BA9F-84700712C09E}
Version : 1
Namespace : {nls.corp.contoso.com}
IPsecCARestriction :
DirectAccessDnsServers :
DirectAccessEnabled : True
DirectAccessProxyType : UseDefault
DirectAccessProxyName :
DirectAccessQueryIPsecEncryption :
DirectAccessQueryIPsecRequired : False
NameServers :
DnsSecEnabled : False
DnsSecQueryIPsecEncryption :
DnsSecQueryIPsecRequired :
DnsSecValidationRequired :
NameEncoding : Disable
DisplayName :
Comment :
This version of the cmdlet performs the task without user confirmation.
PS C:\\>Remove-DnsClientNrptRule -Name "DA-{274D94E4-E38B-4997-BA9F-84700712C09E}" ????????PassThru -Force
Name : DA-{274D94E4-E38B-4997-BA9F-84700712C09E}
Version : 1
Namespace : {nls.corp.contoso.com}
IPsecCARestriction :
DirectAccessDnsServers :
DirectAccessEnabled : True
DirectAccessProxyType : UseDefault
DirectAccessProxyName :
DirectAccessQueryIPsecEncryption :
DirectAccessQueryIPsecRequired : False
NameServers :
DnsSecEnabled : False
DnsSecQueryIPsecEncryption :
DnsSecQueryIPsecRequired :
DnsSecValidationRequired :
NameEncoding : Disable
DisplayName :
Comment :
This example removes the NRPT rule named {1326d9d0-4fb5-4fed-9f67-f53637b85010}.
RELATED LINKS
Online Version:
Add-DnsClientNrptRule
Get-DnsClientNrptGlobal
Get-DnsClientNrptPolicy
Get-DnsClientNrptRule
Set-DnsClientNrptGlobal
Set-DnsClientNrptRule
SYNOPSIS
Removes the specified DNS client NRPT rule.
SYNTAX
Remove-DnsClientNrptRule [-Name] <String> [-CimSession <CimSession[]>] [-Force] [-GpoName <String>] [-PassThru] [-Server <String>] [-ThrottleLimit
<Int32>] [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Remove-DnsClientNrptRule cmdlet removes the specified DNS client Name Resolution Policy Table (NRPT) rule.
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Force [<SwitchParameter>]
Forces the command to run without asking for user confirmation.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-GpoName [<String>]
Specifies the name of the Group Policy Object (GPO).
-- If this parameter and the Server parameter are specified, then the NRPT rule is added in the GPO of domain. The Server parameter specifies
the domain controller (DC).
-- If neither this parameter nor the Server parameter is specified, then the NRPT rule is added for local client computer.
-- If this parameter is specified and the Server parameter is not specified, then the DC of the domain specified by this parameter value is
found and NRPT rule is added to the GPO.
-- If this parameter is not specified and the Server parameter is specified, then an error is displayed.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-Name <String>
Specifies the name which uniquely identifies a rule.
Required? true
Position? 2
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Server [<String>]
Specifies the name of the server containing the GPO. This parameter is only applicable with the GpoName parameter.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DNS/DnsClientNrptRule
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DNS/DnsClientNrptRule
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The DnsClientNrptRule object contains all of the properties of the DNS client NRPT rule.
Example 1: Remove an NRPT rule from a specified server
PS C:\\>Remove-DnsClientNrptRule -GpoName "TestGPO" -Name "{1326d9d0-4fb5-4fed-9f67-f53637b85010}" -PassThru -Server "host1.com" -Force
This example removes the NRPT rule named {1326d9d0-4fb5-4fed-9f67-f53637b85010} on the server named host1.com.
Example 2: Remove an NRPT rule
PS C:\\>Remove-DnsClientNrptRule -Name "DA-{274D94E4-E38B-4997-BA9F-84700712C09E}" -PassThru
Confirm
Removing NRPT rule for the namespace nls.corp.contoso.com with
DAEnable: Enable,
DnsSecValidationRequired: Disabled,
NameEncoding: Disable
NameServers: No
Do you want to continue?
[Y] Yes [N] No [S] Suspend [?] Help (default is "Y"): Y
Name : DA-{274D94E4-E38B-4997-BA9F-84700712C09E}
Version : 1
Namespace : {nls.corp.contoso.com}
IPsecCARestriction :
DirectAccessDnsServers :
DirectAccessEnabled : True
DirectAccessProxyType : UseDefault
DirectAccessProxyName :
DirectAccessQueryIPsecEncryption :
DirectAccessQueryIPsecRequired : False
NameServers :
DnsSecEnabled : False
DnsSecQueryIPsecEncryption :
DnsSecQueryIPsecRequired :
DnsSecValidationRequired :
NameEncoding : Disable
DisplayName :
Comment :
This version of the cmdlet performs the task without user confirmation.
PS C:\\>Remove-DnsClientNrptRule -Name "DA-{274D94E4-E38B-4997-BA9F-84700712C09E}" ????????PassThru -Force
Name : DA-{274D94E4-E38B-4997-BA9F-84700712C09E}
Version : 1
Namespace : {nls.corp.contoso.com}
IPsecCARestriction :
DirectAccessDnsServers :
DirectAccessEnabled : True
DirectAccessProxyType : UseDefault
DirectAccessProxyName :
DirectAccessQueryIPsecEncryption :
DirectAccessQueryIPsecRequired : False
NameServers :
DnsSecEnabled : False
DnsSecQueryIPsecEncryption :
DnsSecQueryIPsecRequired :
DnsSecValidationRequired :
NameEncoding : Disable
DisplayName :
Comment :
This example removes the NRPT rule named {1326d9d0-4fb5-4fed-9f67-f53637b85010}.
RELATED LINKS
Online Version:
Add-DnsClientNrptRule
Get-DnsClientNrptGlobal
Get-DnsClientNrptPolicy
Get-DnsClientNrptRule
Set-DnsClientNrptGlobal
Set-DnsClientNrptRule