< Back
Get-IscsiSession
Post
NAME Get-IscsiSession
SYNOPSIS
Retrieves information about established iSCSI sessions.
SYNTAX
Get-IscsiSession [-CimSession <CimSession[]>] [-InitiatorPort <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-IscsiTargetPortal <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-InitiatorSideIdentifier <String[]>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-IscsiTarget <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-IscsiConnection <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-Disk <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-NumberOfConnections <UInt32[]>] [-SessionIdentifier <String[]>] [-TargetSideIdentifier <String[]>]
[-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-IscsiSession cmdlet returns information about iSCSI sessions.
There is an association between the iSCSI session and the disk object. It is possible to return all disks connected by using a specific iSCSI
session by running the following command:
PS C:\\> Get-iSCSISession | Get-Disk
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Disk [<CimInstance>]
Accepts a MSFT disk object as an input. The MSFT disk object is output from the Get-Disk cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-InitiatorPort [<CimInstance>]
Accepts a MSFT initiator port object as an input. The MSFT initiator port object is output from the Get-InitiatorPort cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-InitiatorSideIdentifier [<String[]>]
Specifies the initiator side identifier.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-IscsiConnection [<CimInstance>]
Accepts a MSFT iSCSI connection object as an input. The MSFT iSCSI connection object is output from the Get-IscsiConnection cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiTarget [<CimInstance>]
Accepts a MSFT iSCSI target object as an input. The MSFT iSCSI target object is output from the Get-IscsiTarget cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiTargetPortal [<CimInstance>]
Accepts a MSFT iSCSI target portal object as an input. The MSFT iSCSI target portal object is output from the Get-IscsiTargetPortal cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-NumberOfConnections [<UInt32[]>]
Specifies the number of connections.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-SessionIdentifier [<String[]>]
Specifies the session identifier.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-TargetSideIdentifier [<String[]>]
Specifies the target side identifier.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_DISK
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_InitiatorPort
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiConnection
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTarget
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTargetPortal
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiSession
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1: Get information about iSCSI sessions
PS C:\\>Get-IscsiSession
AuthenticationType : NONE
InitiatorInstanceName : ROOT\\ISCSIPRT\\0000_0
InitiatorNodeAddress : iqn.1991-05.com.microsoft:deepcore.contoso.com
InitiatorPortalAddress :
InitiatorSideIdentifier : 400001370001
IsConnected : True
IsDataDigest : False
IsDiscovered : True
IsHeaderDigest : False
IsMultipathEnabled : False
IsPersistent : True
NumberOfConnections : 1
SessionIdentifier : fffffa800d008430-4000013700000001
TargetNodeAddress : iqn.1991-05.com.contoso:testiscsi-deepcore-target
TargetSideIdentifier : 0200
AuthenticationType : NONE
InitiatorInstanceName : ROOT\\ISCSIPRT\\0000_0
InitiatorNodeAddress : iqn.1991-05.com.contoso:deepcore.contoso.com
InitiatorPortalAddress :
InitiatorSideIdentifier : 400001370004
IsConnected : True
IsDataDigest : False
IsDiscovered : True
IsHeaderDigest : False
IsMultipathEnabled : False
IsPersistent : True
NumberOfConnections : 1
SessionIdentifier : fffffa800d008430-4000013700000002
TargetNodeAddress : iqn.1991-05.com.contoso:testiscsi-deepcore-target
TargetSideIdentifier : 0100
AuthenticationType : NONE
InitiatorInstanceName : ROOT\\ISCSIPRT\\0000_0
InitiatorNodeAddress : iqn.1991-05.com.contoso:deepcore.contoso.com
InitiatorPortalAddress :
InitiatorSideIdentifier : 400001370002
IsConnected : True
IsDataDigest : False
IsDiscovered : True
IsHeaderDigest : False
IsMultipathEnabled : False
IsPersistent : True
NumberOfConnections : 1
SessionIdentifier : fffffa800d008430-4000013700000003
TargetNodeAddress : iqn.1991-05.com.contoso:testiscsi-deepcore-target
TargetSideIdentifier : 0300
This command returns information about iSCSI sessions.
RELATED LINKS
iSCSI on TechNet
Storage on TechNet
Get-IscsiConnection
Get-IscsiTarget
Get-IscsiTargetPortal
SYNOPSIS
Retrieves information about established iSCSI sessions.
SYNTAX
Get-IscsiSession [-CimSession <CimSession[]>] [-InitiatorPort <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-IscsiTargetPortal <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-InitiatorSideIdentifier <String[]>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-IscsiTarget <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-IscsiConnection <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-Disk <CimInstance>] [-NumberOfConnections <UInt32[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiSession [-CimSession <CimSession[]>] [-NumberOfConnections <UInt32[]>] [-SessionIdentifier <String[]>] [-TargetSideIdentifier <String[]>]
[-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-IscsiSession cmdlet returns information about iSCSI sessions.
There is an association between the iSCSI session and the disk object. It is possible to return all disks connected by using a specific iSCSI
session by running the following command:
PS C:\\> Get-iSCSISession | Get-Disk
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Disk [<CimInstance>]
Accepts a MSFT disk object as an input. The MSFT disk object is output from the Get-Disk cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-InitiatorPort [<CimInstance>]
Accepts a MSFT initiator port object as an input. The MSFT initiator port object is output from the Get-InitiatorPort cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-InitiatorSideIdentifier [<String[]>]
Specifies the initiator side identifier.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-IscsiConnection [<CimInstance>]
Accepts a MSFT iSCSI connection object as an input. The MSFT iSCSI connection object is output from the Get-IscsiConnection cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiTarget [<CimInstance>]
Accepts a MSFT iSCSI target object as an input. The MSFT iSCSI target object is output from the Get-IscsiTarget cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiTargetPortal [<CimInstance>]
Accepts a MSFT iSCSI target portal object as an input. The MSFT iSCSI target portal object is output from the Get-IscsiTargetPortal cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-NumberOfConnections [<UInt32[]>]
Specifies the number of connections.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-SessionIdentifier [<String[]>]
Specifies the session identifier.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-TargetSideIdentifier [<String[]>]
Specifies the target side identifier.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_DISK
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_InitiatorPort
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiConnection
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTarget
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTargetPortal
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiSession
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1: Get information about iSCSI sessions
PS C:\\>Get-IscsiSession
AuthenticationType : NONE
InitiatorInstanceName : ROOT\\ISCSIPRT\\0000_0
InitiatorNodeAddress : iqn.1991-05.com.microsoft:deepcore.contoso.com
InitiatorPortalAddress :
InitiatorSideIdentifier : 400001370001
IsConnected : True
IsDataDigest : False
IsDiscovered : True
IsHeaderDigest : False
IsMultipathEnabled : False
IsPersistent : True
NumberOfConnections : 1
SessionIdentifier : fffffa800d008430-4000013700000001
TargetNodeAddress : iqn.1991-05.com.contoso:testiscsi-deepcore-target
TargetSideIdentifier : 0200
AuthenticationType : NONE
InitiatorInstanceName : ROOT\\ISCSIPRT\\0000_0
InitiatorNodeAddress : iqn.1991-05.com.contoso:deepcore.contoso.com
InitiatorPortalAddress :
InitiatorSideIdentifier : 400001370004
IsConnected : True
IsDataDigest : False
IsDiscovered : True
IsHeaderDigest : False
IsMultipathEnabled : False
IsPersistent : True
NumberOfConnections : 1
SessionIdentifier : fffffa800d008430-4000013700000002
TargetNodeAddress : iqn.1991-05.com.contoso:testiscsi-deepcore-target
TargetSideIdentifier : 0100
AuthenticationType : NONE
InitiatorInstanceName : ROOT\\ISCSIPRT\\0000_0
InitiatorNodeAddress : iqn.1991-05.com.contoso:deepcore.contoso.com
InitiatorPortalAddress :
InitiatorSideIdentifier : 400001370002
IsConnected : True
IsDataDigest : False
IsDiscovered : True
IsHeaderDigest : False
IsMultipathEnabled : False
IsPersistent : True
NumberOfConnections : 1
SessionIdentifier : fffffa800d008430-4000013700000003
TargetNodeAddress : iqn.1991-05.com.contoso:testiscsi-deepcore-target
TargetSideIdentifier : 0300
This command returns information about iSCSI sessions.
RELATED LINKS
iSCSI on TechNet
Storage on TechNet
Get-IscsiConnection
Get-IscsiTarget
Get-IscsiTargetPortal