< Back
Get-IscsiTarget
Post
NAME Get-IscsiTarget
SYNOPSIS
Returns an iSCSI target object for each iSCSI target that is registered with the iSCSI initiator.
SYNTAX
Get-IscsiTarget [-CimSession <CimSession[]>] [-NodeAddress <String[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-InitiatorPort <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-IscsiTargetPortal <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-IscsiSession <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-IscsiConnection <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-IscsiTarget cmdlet returns information about connected iSCSI targets.
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InitiatorPort [<CimInstance>]
Accepts a MSFT initiator port object as an input. The MSFT initiator port object is output from the Get-InitiatorPort cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiConnection [<CimInstance>]
Accepts a MSFT iSCSI connection object as an input. The MSFT iSCSI connection object is output from the Get-IscsiConnection cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiSession [<CimInstance>]
Accepts a MSFT iSCSI session object as an input. The MSFT iSCSI session object is output from the Get-IscsiSession cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiTargetPortal [<CimInstance>]
Accepts a MSFT iSCSI target portal object as an input. The MSFT iSCSI target portal object is output from the Get-IscsiTargetPortal cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-NodeAddress [<String[]>]
Specifies the IQN of the discovered target.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_InitiatorPort
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiConnection
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiSession
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTargetPortal
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTarget
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1: Get iSCSI targets
PS C:\\>Get-IscsiTarget
IsConnected NodeAddress
----------- -----------
True iqn.1991-05.com.contoso:testiscsi-deepcore-target
This command returns an iSCSI target object for each iSCSI target that is registered with the iSCSI initiator.
RELATED LINKS
iSCSI on TechNet
Storage on TechNet
Get-IscsiConnection
Get-IscsiSession
Get-IscsiTargetPortal
SYNOPSIS
Returns an iSCSI target object for each iSCSI target that is registered with the iSCSI initiator.
SYNTAX
Get-IscsiTarget [-CimSession <CimSession[]>] [-NodeAddress <String[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-InitiatorPort <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-IscsiTargetPortal <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-IscsiSession <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
Get-IscsiTarget [-CimSession <CimSession[]>] [-IscsiConnection <CimInstance>] [-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-IscsiTarget cmdlet returns information about connected iSCSI targets.
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InitiatorPort [<CimInstance>]
Accepts a MSFT initiator port object as an input. The MSFT initiator port object is output from the Get-InitiatorPort cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiConnection [<CimInstance>]
Accepts a MSFT iSCSI connection object as an input. The MSFT iSCSI connection object is output from the Get-IscsiConnection cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiSession [<CimInstance>]
Accepts a MSFT iSCSI session object as an input. The MSFT iSCSI session object is output from the Get-IscsiSession cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IscsiTargetPortal [<CimInstance>]
Accepts a MSFT iSCSI target portal object as an input. The MSFT iSCSI target portal object is output from the Get-IscsiTargetPortal cmdlet.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-NodeAddress [<String[]>]
Specifies the IQN of the discovered target.
Required? false
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_InitiatorPort
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiConnection
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiSession
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTargetPortal
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.Ciminstance#MSFT_IscsiTarget
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1: Get iSCSI targets
PS C:\\>Get-IscsiTarget
IsConnected NodeAddress
----------- -----------
True iqn.1991-05.com.contoso:testiscsi-deepcore-target
This command returns an iSCSI target object for each iSCSI target that is registered with the iSCSI initiator.
RELATED LINKS
iSCSI on TechNet
Storage on TechNet
Get-IscsiConnection
Get-IscsiSession
Get-IscsiTargetPortal