< Back
Set-NetAdapterLso
Post
NAME Set-NetAdapterLso
SYNOPSIS
Sets the LSO properties of a network adapter.
SYNTAX
Set-NetAdapterLso [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]>] [-IncludeHidden] [-IPv4Enabled <Boolean>] [-IPv6Enabled <Boolean>]
[-NoRestart] [-PassThru] [-ThrottleLimit <Int32>] [-V1IPv4Enabled <Boolean>] [-Confirm] [-WhatIf] [<CommonParameters>]
Set-NetAdapterLso [-AsJob] [-CimSession <CimSession[]>] [-IncludeHidden] [-IPv4Enabled <Boolean>] [-IPv6Enabled <Boolean>] [-NoRestart]
[-PassThru] [-ThrottleLimit <Int32>] [-V1IPv4Enabled <Boolean>] -InterfaceDescription <String[]> [-Confirm] [-WhatIf] [<CommonParameters>]
Set-NetAdapterLso [-AsJob] [-CimSession <CimSession[]>] [-IPv4Enabled <Boolean>] [-IPv6Enabled <Boolean>] [-NoRestart] [-PassThru] [-ThrottleLimit
<Int32>] [-V1IPv4Enabled <Boolean>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Set-NetAdapterLso cmdlet manages the large send offload property which can improve send side performance by having the network adapter
distribute a large send request into smaller sizes that can be sent out by the network adapter. Without this setting Windows Server???? 2012 and
later would have to perform this work. The offload reduces the load on the processor, so that the processor can to do more application level work.
If only setting the enabled state of LSO, then use the Enable-NetAdapterLso or Disable-NetAdapterLso cmdlets.
PARAMETERS
-AsJob [<SwitchParameter>]
ps_cimcommon_asjob
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IncludeHidden [<SwitchParameter>]
Indicates that the cmdlet includes both visible and hidden network adapters in the operation. By default only visible network adapters are
included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is
matched against both hidden and visible network adapters.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? true (ByValue)
Accept wildcard characters? false
-InterfaceDescription <String[]>
Specifies an array of network adapter interface descriptions. For a physical network adapter this is typically the name of the vendor of the
network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.
Required? true
Position? named
Default value
Accept pipeline input? true (ByPropertyName)
Accept wildcard characters? true
-IPv4Enabled <Boolean>
Indicates whether LSO for IPv4 traffic is enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPv6Enabled <Boolean>
Indicates whether LSO for IPv6 traffic is enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Name <String[]>
Specifies an array of network adapter names.
Required? true
Position? 1
Default value
Accept pipeline input? true (ByPropertyName)
Accept wildcard characters? true
-NoRestart [<SwitchParameter>]
Indicates that the cmdlet does not restart the network adapter after completing the operation. Many advanced properties require restarting the
network adapter before the new settings take effect.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-V1IPv4Enabled <Boolean>
Indicates whether LSO for V1IPv4 on the network adapter is enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter LsoSettingData[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter LsoSettingData
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1: Enable LSO for IPv4 and disable LSO for IPv6 on the specified network adapter
PS C:\\>Set-NetAdapterLso ????????Name "MyAdapter" -IPv4Enabled $True -IPv6Enabled $False
This command enables LSO for IPv4 and disables LSO for IPv6 on the network adapter named MyAdapter.
RELATED LINKS
Online Version:
Disable-NetAdapterLso
Enable-NetAdapterLso
Get-NetAdapterLso
CommonParameters : True
WorkflowCommonParameters : False
details : @{name=Set-NetAdapterPacketDirect; noun=; verb=}
Syntax : @{syntaxItem=System.Object[]}
parameters : @{parameter=System.Object[]}
inputTypes : @{inputType=}
returnValues : @{returnValue=}
aliases : None
remarks : Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help.
-- To download and install Help files for the module that includes this cmdlet, use Update-Help.
alertSet :
description :
examples :
Synopsis :
Set-NetAdapterPacketDirect [-Name] <string[]> [-IncludeHidden] [-Enabled <bool>] [-DomainId <uint32>] [-NoRestart]
[-CimSession <CimSession[]>] [-ThrottleLimit <int>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
Set-NetAdapterPacketDirect -InterfaceDescription <string[]> [-IncludeHidden] [-Enabled <bool>] [-DomainId <uint32>]
[-NoRestart] [-CimSession <CimSession[]>] [-ThrottleLimit <int>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm]
[<CommonParameters>]
Set-NetAdapterPacketDirect -InputObject <CimInstance#MSFT_NetAdapterPacketDirectSettingData[]> [-Enabled <bool>] [-DomainId
<uint32>] [-NoRestart] [-CimSession <CimSession[]>] [-ThrottleLimit <int>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm]
[<CommonParameters>]
ModuleName : NetAdapter
nonTerminatingErrors :
xmlns:command : http://schemas.microsoft.com/maml/dev/command/2004/10
xmlns:dev : http://schemas.microsoft.com/maml/dev/2004/10
xmlns:maml : http://schemas.microsoft.com/maml/2004/10
Name : Set-NetAdapterPacketDirect
Category : Function
Component :
Role :
Functionality :
SYNOPSIS
Sets the LSO properties of a network adapter.
SYNTAX
Set-NetAdapterLso [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]>] [-IncludeHidden] [-IPv4Enabled <Boolean>] [-IPv6Enabled <Boolean>]
[-NoRestart] [-PassThru] [-ThrottleLimit <Int32>] [-V1IPv4Enabled <Boolean>] [-Confirm] [-WhatIf] [<CommonParameters>]
Set-NetAdapterLso [-AsJob] [-CimSession <CimSession[]>] [-IncludeHidden] [-IPv4Enabled <Boolean>] [-IPv6Enabled <Boolean>] [-NoRestart]
[-PassThru] [-ThrottleLimit <Int32>] [-V1IPv4Enabled <Boolean>] -InterfaceDescription <String[]> [-Confirm] [-WhatIf] [<CommonParameters>]
Set-NetAdapterLso [-AsJob] [-CimSession <CimSession[]>] [-IPv4Enabled <Boolean>] [-IPv6Enabled <Boolean>] [-NoRestart] [-PassThru] [-ThrottleLimit
<Int32>] [-V1IPv4Enabled <Boolean>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Set-NetAdapterLso cmdlet manages the large send offload property which can improve send side performance by having the network adapter
distribute a large send request into smaller sizes that can be sent out by the network adapter. Without this setting Windows Server???? 2012 and
later would have to perform this work. The offload reduces the load on the processor, so that the processor can to do more application level work.
If only setting the enabled state of LSO, then use the Enable-NetAdapterLso or Disable-NetAdapterLso cmdlets.
PARAMETERS
-AsJob [<SwitchParameter>]
ps_cimcommon_asjob
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IncludeHidden [<SwitchParameter>]
Indicates that the cmdlet includes both visible and hidden network adapters in the operation. By default only visible network adapters are
included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is
matched against both hidden and visible network adapters.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? true (ByValue)
Accept wildcard characters? false
-InterfaceDescription <String[]>
Specifies an array of network adapter interface descriptions. For a physical network adapter this is typically the name of the vendor of the
network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.
Required? true
Position? named
Default value
Accept pipeline input? true (ByPropertyName)
Accept wildcard characters? true
-IPv4Enabled <Boolean>
Indicates whether LSO for IPv4 traffic is enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPv6Enabled <Boolean>
Indicates whether LSO for IPv6 traffic is enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Name <String[]>
Specifies an array of network adapter names.
Required? true
Position? 1
Default value
Accept pipeline input? true (ByPropertyName)
Accept wildcard characters? true
-NoRestart [<SwitchParameter>]
Indicates that the cmdlet does not restart the network adapter after completing the operation. Many advanced properties require restarting the
network adapter before the new settings take effect.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-V1IPv4Enabled <Boolean>
Indicates whether LSO for V1IPv4 on the network adapter is enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter LsoSettingData[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter LsoSettingData
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1: Enable LSO for IPv4 and disable LSO for IPv6 on the specified network adapter
PS C:\\>Set-NetAdapterLso ????????Name "MyAdapter" -IPv4Enabled $True -IPv6Enabled $False
This command enables LSO for IPv4 and disables LSO for IPv6 on the network adapter named MyAdapter.
RELATED LINKS
Online Version:
Disable-NetAdapterLso
Enable-NetAdapterLso
Get-NetAdapterLso
CommonParameters : True
WorkflowCommonParameters : False
details : @{name=Set-NetAdapterPacketDirect; noun=; verb=}
Syntax : @{syntaxItem=System.Object[]}
parameters : @{parameter=System.Object[]}
inputTypes : @{inputType=}
returnValues : @{returnValue=}
aliases : None
remarks : Get-Help cannot find the Help files for this cmdlet on this computer. It is displaying only partial help.
-- To download and install Help files for the module that includes this cmdlet, use Update-Help.
alertSet :
description :
examples :
Synopsis :
Set-NetAdapterPacketDirect [-Name] <string[]> [-IncludeHidden] [-Enabled <bool>] [-DomainId <uint32>] [-NoRestart]
[-CimSession <CimSession[]>] [-ThrottleLimit <int>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
Set-NetAdapterPacketDirect -InterfaceDescription <string[]> [-IncludeHidden] [-Enabled <bool>] [-DomainId <uint32>]
[-NoRestart] [-CimSession <CimSession[]>] [-ThrottleLimit <int>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm]
[<CommonParameters>]
Set-NetAdapterPacketDirect -InputObject <CimInstance#MSFT_NetAdapterPacketDirectSettingData[]> [-Enabled <bool>] [-DomainId
<uint32>] [-NoRestart] [-CimSession <CimSession[]>] [-ThrottleLimit <int>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm]
[<CommonParameters>]
ModuleName : NetAdapter
nonTerminatingErrors :
xmlns:command : http://schemas.microsoft.com/maml/dev/command/2004/10
xmlns:dev : http://schemas.microsoft.com/maml/dev/2004/10
xmlns:maml : http://schemas.microsoft.com/maml/2004/10
Name : Set-NetAdapterPacketDirect
Category : Function
Component :
Role :
Functionality :