< Back
Get-NetFirewallSetting
Post
NAME Get-NetFirewallSetting
SYNOPSIS
Retrieves the global firewall settings of the target computer.
SYNTAX
Get-NetFirewallSetting [-All] [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PolicyStore <String>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
DESCRIPTION
The Get-NetFirewallSetting cmdlet retrieves the global firewall settings of the target computer. The NetFirewallSetting object specifies
properties that apply to the firewall and IPsec settings, no matter which network profile is currently in use. The global configurations include
viewing the active profile, exemptions, specified certification validation levels, and user and computer authorization lists.
To view enforced settings, view the firewall settings from the ActiveStore policy store source.
PARAMETERS
-All [<SwitchParameter>]
Indicates that all of the firewall settings within the specified policy store are retrieved.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the rules to be retrieved.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell????, each change to a GPO requires
the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A
GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the
DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO
cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the rules to be retrieved.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at
creation time with the Copy-NetFirewallRule cmdlet or with the New-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\NetFirewallSetting
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
EXAMPLE 1
PS C:\\>Get-NetFirewallSetting
This example gets the global firewall settings on the local computer.
EXAMPLE 2
PS C:\\>Get-NetFirewallSetting ????????PolicyStore corp.contoso.com/gpo_name | Set-NetFirewallSetting -Exemptions RouterDiscovery
This example modifies the global firewall settings of a particular GPO policy store. Running this cmdlet without specifying the policy store
retrieves the persistent store.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=285414
Copy-NetFirewallRule
New-NetFirewallRule
Open-NetGPO
Save-NetGPO
Set-NetFirewallSetting
New-GPO
SYNOPSIS
Retrieves the global firewall settings of the target computer.
SYNTAX
Get-NetFirewallSetting [-All] [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PolicyStore <String>] [-ThrottleLimit <Int32>]
[<CommonParameters>]
DESCRIPTION
The Get-NetFirewallSetting cmdlet retrieves the global firewall settings of the target computer. The NetFirewallSetting object specifies
properties that apply to the firewall and IPsec settings, no matter which network profile is currently in use. The global configurations include
viewing the active profile, exemptions, specified certification validation levels, and user and computer authorization lists.
To view enforced settings, view the firewall settings from the ActiveStore policy store source.
PARAMETERS
-All [<SwitchParameter>]
Indicates that all of the firewall settings within the specified policy store are retrieved.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the rules to be retrieved.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell????, each change to a GPO requires
the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A
GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the
DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO
cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the rules to be retrieved.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at
creation time with the Copy-NetFirewallRule cmdlet or with the New-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\NetFirewallSetting
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
EXAMPLE 1
PS C:\\>Get-NetFirewallSetting
This example gets the global firewall settings on the local computer.
EXAMPLE 2
PS C:\\>Get-NetFirewallSetting ????????PolicyStore corp.contoso.com/gpo_name | Set-NetFirewallSetting -Exemptions RouterDiscovery
This example modifies the global firewall settings of a particular GPO policy store. Running this cmdlet without specifying the policy store
retrieves the persistent store.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=285414
Copy-NetFirewallRule
New-NetFirewallRule
Open-NetGPO
Save-NetGPO
Set-NetFirewallSetting
New-GPO