< Back
New-NetIPsecPhase1AuthSet
Post
NAME New-NetIPsecPhase1AuthSet
SYNOPSIS
Creates a phase 1 authentication set that specifies the methods offered for main mode first authentication during IPsec negotiations.
SYNTAX
New-NetIPsecPhase1AuthSet [-AsJob] [-CimSession <CimSession[]>] [-Default] [-Description <String>] [-GPOSession <String>] [-Group <String>] [-Name
<String>] [-PolicyStore <String>] [-ThrottleLimit <Int32>] -DisplayName <String> -Proposal <CimInstance[]> [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The New-NetIPsecPhase1AuthSet cmdlet creates a set of authentication methods to use during IPsec negotiations. The first phase of authentication
is typically a computer authentication method such as Kerberos v5, certificate, or pre-shared key authentication.
A phase 1 authentication set contains an ordered list of computer authentication proposals. A proposal is created by running the
New-NetIPsecAuthProposal cmdlet. During the main mode negotiation, the first proposal that both peers have in common will be used for mutual
authentication. A NetIPsecPhase1AuthSet object and a NetIPsecMainModeCryptoSet object provide all of the necessary security association (SA)
parameters for a NetIPsecMainModeRule object. Use the Get-NetIPsecMainModeSA cmdlet to monitor the SAs that are created.
The newly created authentication set can be associated with one or more IPsec rules using the Set-NetIPsecRule cmdlet or the
Set-NetIPsecMainModeRule cmdlet.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Default [<SwitchParameter>]
Specifies the customized parameters for overriding the defaults for main mode encryption, making it the new default setting for encryption.
For the default Phase1Authset object, the default Name parameter value is {E5A5D32A-4BCE-4e4d-B07F-4AB1BA7E5FE3}.
To retrieve default settings, query by using the default Name parameter value. To specify a different default cryptographic set, delete the
current default set and use the Rename-NetIPsecPhase1AuthSet cmdlet to specify the default set with {E5A5D32A-4BCE-4e4d-B07F-4AB1BA7E5FE3}.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description <String>
Specifies that matching firewall rules of the indicated description are created. Wildcard characters are accepted.
This parameter provides information about the firewall rule. This parameter specifies the localized, user-facing description of the IPsec rule.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayName <String>
Specifies that only matching firewall rules of the indicated display name are created. Wildcard characters are accepted.
Specifies the localized, user-facing name of the firewall rule being created. When creating a rule this parameter is required. This parameter
value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing scripts in
multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value.
Note: This parameter cannot be set to All.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the rules to be created.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell????, each change to a GPO requires
the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A
GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the
DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO
cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Group <String>
Specifies that only matching firewall rules of the indicated group association are created. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then
this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using
the Set-NetFirewallRule cmdlets, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group
receive the same set of modifications. It is good practice to specify this parameter value with a universal and world-ready indirect
@FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be modified using
dot-notation and the Set-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Name <String>
Specifies that only matching main mode cryptographic sets of the indicated name are created. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy
processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only
one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific
names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have
precedence. So, if an administrator has a different or more specific rule the same name in a higher-precedence GPO, then it overrides other
rules that exist.
The default value is a randomly assigned value.
When you want to override the defaults for main mode encryption, specify the customized parameters and set this parameter value, making it the
new default setting for encryption.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the sets to be created.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically, during application installation, on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the Static Windows Service Hardening (WSH), and the Configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecMainModeCryptoSet cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy
store at creation time with the Copy-NetIPsecMainModeCryptoSet cmdlet or with this cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Proposal <CimInstance[]>
Associates the specified cryptographic proposal to the corresponding cryptographic set to be used in main mode negotiations. Separate multiple
entries with a comma.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetIKEP1AuthSet
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
EXAMPLE 1
PS C:\\>$cert1Proposal = New-NetIPsecAuthProposal -Machine ????????Cert -Authority "C=US,O=MSFT,CN=Microsoft Root Authority" -AuthorityType Root
PS C:\\>$cert2Proposal = New-NetIPsecAuthProposal ????????Machine ????????Cert -Authority "C=US,O=MYORG,CN=\\'My Organizations Root Certificate\\'" -AuthorityType
Root
PS C:\\>$certAuthSet = New-NetIPsecPhase1AuthSet ????????DisplayName "Computer Certificate Auth Set" -Proposal $cert1Proposal,$cert2Proposal
PS C:\\>New-NetIPSecRule -DisplayName "Authenticate with Certificates Rule" -InboundSecurity Require -OutboundSecurity Request -Phase2AuthSet
$certAuthSet.Name
This example creates a rule that requires that incoming connections are authenticated by using either of two computer certificates. The computer
also requests authentication for outbound connections, but allows an outbound connection if authentication is not successful.
EXAMPLE 2
PS C:\\>$mkerbauthprop = New-NetIPsecAuthProposal -Machine -Kerberos
PS C:\\>$mntlmauthprop = New-NetIPsecAuthProposal -Machine -NTLM
PS C:\\>$p1Auth = New-NetIPsecPhase1AuthSet -DisplayName "First Computer Auth" -Proposal $mkerbauthprop,$mntlmauthprop
PS C:\\>$ukerbauthprop = New-NetIPsecAuthProposal -User ????????Kerberos
PS C:\\>$unentlmauthprop = New-NetIPsecAuthProposal -User ????????NTLM
PS C:\\>$anonyauthprop = New-NetIPsecAuthProposal ????????Anonymous
PS C:\\>$p2Auth = New-NetIPsecPhase2AuthSet -DisplayName "Second User Auth" ????????Proposal $ukerbauthprop,$unentlmauthprop,$anonyauthprop
PS C:\\>New-NetIPSecRule -DisplayName "Authenticate Both Computer and User" -InboundSecurity Require -OutboundSecurity Require -Phase1AuthSet
$p1Auth.Name -Phase2AuthSet $p2Auth.Name
This example creates a rule that requires a first, or computer, authentication and attempts an optional second, or user, authentication.
EXAMPLE 3
PS C:\\>$proposal1 = (New-NetIPsecMainModeCryptoProposal -Encryption DES3 -Hash MD5 -KeyExchange DH1)
PS C:\\>$proposal2 = (New-NetIPsecMainModeCryptoProposal -Encryption AES192 -Hash MD5 -KeyExchange DH14)
PS C:\\>$proposal3 = (New-NetIPsecMainModeCryptoProposal -Encryption DES3 -Hash MD5 -KeyExchange DH19)
PS C:\\>$mmCryptoSet = New-NetIPsecMainModeCryptoSet -DisplayName "Main Mode Crypto Set" -Proposal $proposal1,$proposal2,$proposal3
PS C:\\>New-NetIPsecMainModeRule -DisplayName "Custom Main Mode Rule" -MainModeCryptoSet $mmCryptoSet.Name
This example creates a main mode rule linked to a cryptographic set that contains three cryptographic proposals.
EXAMPLE 4
PS C:\\>$cert1Proposal = New-NetIPsecAuthProposal -Machine ????????Cert -Authority "C=US,O=MSFT,CN=Microsoft Root Authority" -AuthorityType Root
PS C:\\>$cert2Proposal = New-NetIPsecAuthProposal ????????Machine ????????Cert -Authority "C=US,O=MYORG,CN='My Organizations Root Certificate'" -AuthorityType
Root
PS C:\\>$certAuthSet = New-NetIPsecPhase1AuthSet ????????DisplayName "Computer Certificate Auth Set" -Proposal $cert1Proposal,$Cert2Proposal
PS C:\\>New-NetIPsecMainModeRule -DisplayName "Main Mode Authenticate with Certificates Rule" ????????Phase1AuthSet $certAuthSet.Name
This example creates a main mode rule that requires that incoming connections are authenticated by using either of two computer certificates.
EXAMPLE 5
PS C:\\>$proposal1 = New-NetIPsecAuthProposal -Machine ????????Cert -Authority "C=US,O=MSFT,CN=Microsoft Root Authority" -AuthorityType Root
PS C:\\>$poAuthSet = New-NetIPsecPhase1AuthSet ????????DisplayName "Computer Certificate Auth Set" -Proposal $proposal1
PS C:\\>$proposal2 = New-NetIPsecMainModeCryptoProposal -Encryption DES3 -Hash MD5 -KeyExchange DH1
PS C:\\>$mmCryptoSet = New-NetIPsecMainModeCryptoSet ????????DisplayName "dhgroup2:3des-sha256,3des-sha384" ????????Proposal $proposal2
PS C:\\>New-NetIPsecMainModeRule -DisplayName "Alternate Main Mode Rule" ????????LocalAddress Any ????????RemoteAddress 192.168.0.5 ????????Phase1AuthSet
$poAuthSet.Name ????????MainModeCryptoSet $mmCryptoSet.Name
This example creates a main mode rule that specifies using alternate authentication and security methods for clients that communicate with the
server at address 192.168.0.5 only.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288044
Get-NetIPsecMainModeCryptoSet
Get-NetIPsecMainModeSA
New-NetIPsecMainModeCryptoSet
New-NetIPsecPhase2AuthSet
New-NetIPSecRule
Rename-NetIPsecMainModeCryptoSet
Open-NetGPO
Save-NetGPO
Set-NetIPsecMainModeCryptoSet
Set-NetIPsecMainModeRule
Set-NetIPsecRule
New-NetIPsecAuthProposal
New-NetIPsecMainModeCryptoProposal
New-GPO
SYNOPSIS
Creates a phase 1 authentication set that specifies the methods offered for main mode first authentication during IPsec negotiations.
SYNTAX
New-NetIPsecPhase1AuthSet [-AsJob] [-CimSession <CimSession[]>] [-Default] [-Description <String>] [-GPOSession <String>] [-Group <String>] [-Name
<String>] [-PolicyStore <String>] [-ThrottleLimit <Int32>] -DisplayName <String> -Proposal <CimInstance[]> [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The New-NetIPsecPhase1AuthSet cmdlet creates a set of authentication methods to use during IPsec negotiations. The first phase of authentication
is typically a computer authentication method such as Kerberos v5, certificate, or pre-shared key authentication.
A phase 1 authentication set contains an ordered list of computer authentication proposals. A proposal is created by running the
New-NetIPsecAuthProposal cmdlet. During the main mode negotiation, the first proposal that both peers have in common will be used for mutual
authentication. A NetIPsecPhase1AuthSet object and a NetIPsecMainModeCryptoSet object provide all of the necessary security association (SA)
parameters for a NetIPsecMainModeRule object. Use the Get-NetIPsecMainModeSA cmdlet to monitor the SAs that are created.
The newly created authentication set can be associated with one or more IPsec rules using the Set-NetIPsecRule cmdlet or the
Set-NetIPsecMainModeRule cmdlet.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Default [<SwitchParameter>]
Specifies the customized parameters for overriding the defaults for main mode encryption, making it the new default setting for encryption.
For the default Phase1Authset object, the default Name parameter value is {E5A5D32A-4BCE-4e4d-B07F-4AB1BA7E5FE3}.
To retrieve default settings, query by using the default Name parameter value. To specify a different default cryptographic set, delete the
current default set and use the Rename-NetIPsecPhase1AuthSet cmdlet to specify the default set with {E5A5D32A-4BCE-4e4d-B07F-4AB1BA7E5FE3}.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description <String>
Specifies that matching firewall rules of the indicated description are created. Wildcard characters are accepted.
This parameter provides information about the firewall rule. This parameter specifies the localized, user-facing description of the IPsec rule.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayName <String>
Specifies that only matching firewall rules of the indicated display name are created. Wildcard characters are accepted.
Specifies the localized, user-facing name of the firewall rule being created. When creating a rule this parameter is required. This parameter
value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing scripts in
multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value.
Note: This parameter cannot be set to All.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the rules to be created.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell????, each change to a GPO requires
the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A
GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the
DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO
cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Group <String>
Specifies that only matching firewall rules of the indicated group association are created. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then
this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using
the Set-NetFirewallRule cmdlets, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group
receive the same set of modifications. It is good practice to specify this parameter value with a universal and world-ready indirect
@FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be modified using
dot-notation and the Set-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Name <String>
Specifies that only matching main mode cryptographic sets of the indicated name are created. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy
processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only
one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific
names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have
precedence. So, if an administrator has a different or more specific rule the same name in a higher-precedence GPO, then it overrides other
rules that exist.
The default value is a randomly assigned value.
When you want to override the defaults for main mode encryption, specify the customized parameters and set this parameter value, making it the
new default setting for encryption.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the sets to be created.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically, during application installation, on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the Static Windows Service Hardening (WSH), and the Configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecMainModeCryptoSet cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy
store at creation time with the Copy-NetIPsecMainModeCryptoSet cmdlet or with this cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Proposal <CimInstance[]>
Associates the specified cryptographic proposal to the corresponding cryptographic set to be used in main mode negotiations. Separate multiple
entries with a comma.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetIKEP1AuthSet
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
EXAMPLE 1
PS C:\\>$cert1Proposal = New-NetIPsecAuthProposal -Machine ????????Cert -Authority "C=US,O=MSFT,CN=Microsoft Root Authority" -AuthorityType Root
PS C:\\>$cert2Proposal = New-NetIPsecAuthProposal ????????Machine ????????Cert -Authority "C=US,O=MYORG,CN=\\'My Organizations Root Certificate\\'" -AuthorityType
Root
PS C:\\>$certAuthSet = New-NetIPsecPhase1AuthSet ????????DisplayName "Computer Certificate Auth Set" -Proposal $cert1Proposal,$cert2Proposal
PS C:\\>New-NetIPSecRule -DisplayName "Authenticate with Certificates Rule" -InboundSecurity Require -OutboundSecurity Request -Phase2AuthSet
$certAuthSet.Name
This example creates a rule that requires that incoming connections are authenticated by using either of two computer certificates. The computer
also requests authentication for outbound connections, but allows an outbound connection if authentication is not successful.
EXAMPLE 2
PS C:\\>$mkerbauthprop = New-NetIPsecAuthProposal -Machine -Kerberos
PS C:\\>$mntlmauthprop = New-NetIPsecAuthProposal -Machine -NTLM
PS C:\\>$p1Auth = New-NetIPsecPhase1AuthSet -DisplayName "First Computer Auth" -Proposal $mkerbauthprop,$mntlmauthprop
PS C:\\>$ukerbauthprop = New-NetIPsecAuthProposal -User ????????Kerberos
PS C:\\>$unentlmauthprop = New-NetIPsecAuthProposal -User ????????NTLM
PS C:\\>$anonyauthprop = New-NetIPsecAuthProposal ????????Anonymous
PS C:\\>$p2Auth = New-NetIPsecPhase2AuthSet -DisplayName "Second User Auth" ????????Proposal $ukerbauthprop,$unentlmauthprop,$anonyauthprop
PS C:\\>New-NetIPSecRule -DisplayName "Authenticate Both Computer and User" -InboundSecurity Require -OutboundSecurity Require -Phase1AuthSet
$p1Auth.Name -Phase2AuthSet $p2Auth.Name
This example creates a rule that requires a first, or computer, authentication and attempts an optional second, or user, authentication.
EXAMPLE 3
PS C:\\>$proposal1 = (New-NetIPsecMainModeCryptoProposal -Encryption DES3 -Hash MD5 -KeyExchange DH1)
PS C:\\>$proposal2 = (New-NetIPsecMainModeCryptoProposal -Encryption AES192 -Hash MD5 -KeyExchange DH14)
PS C:\\>$proposal3 = (New-NetIPsecMainModeCryptoProposal -Encryption DES3 -Hash MD5 -KeyExchange DH19)
PS C:\\>$mmCryptoSet = New-NetIPsecMainModeCryptoSet -DisplayName "Main Mode Crypto Set" -Proposal $proposal1,$proposal2,$proposal3
PS C:\\>New-NetIPsecMainModeRule -DisplayName "Custom Main Mode Rule" -MainModeCryptoSet $mmCryptoSet.Name
This example creates a main mode rule linked to a cryptographic set that contains three cryptographic proposals.
EXAMPLE 4
PS C:\\>$cert1Proposal = New-NetIPsecAuthProposal -Machine ????????Cert -Authority "C=US,O=MSFT,CN=Microsoft Root Authority" -AuthorityType Root
PS C:\\>$cert2Proposal = New-NetIPsecAuthProposal ????????Machine ????????Cert -Authority "C=US,O=MYORG,CN='My Organizations Root Certificate'" -AuthorityType
Root
PS C:\\>$certAuthSet = New-NetIPsecPhase1AuthSet ????????DisplayName "Computer Certificate Auth Set" -Proposal $cert1Proposal,$Cert2Proposal
PS C:\\>New-NetIPsecMainModeRule -DisplayName "Main Mode Authenticate with Certificates Rule" ????????Phase1AuthSet $certAuthSet.Name
This example creates a main mode rule that requires that incoming connections are authenticated by using either of two computer certificates.
EXAMPLE 5
PS C:\\>$proposal1 = New-NetIPsecAuthProposal -Machine ????????Cert -Authority "C=US,O=MSFT,CN=Microsoft Root Authority" -AuthorityType Root
PS C:\\>$poAuthSet = New-NetIPsecPhase1AuthSet ????????DisplayName "Computer Certificate Auth Set" -Proposal $proposal1
PS C:\\>$proposal2 = New-NetIPsecMainModeCryptoProposal -Encryption DES3 -Hash MD5 -KeyExchange DH1
PS C:\\>$mmCryptoSet = New-NetIPsecMainModeCryptoSet ????????DisplayName "dhgroup2:3des-sha256,3des-sha384" ????????Proposal $proposal2
PS C:\\>New-NetIPsecMainModeRule -DisplayName "Alternate Main Mode Rule" ????????LocalAddress Any ????????RemoteAddress 192.168.0.5 ????????Phase1AuthSet
$poAuthSet.Name ????????MainModeCryptoSet $mmCryptoSet.Name
This example creates a main mode rule that specifies using alternate authentication and security methods for clients that communicate with the
server at address 192.168.0.5 only.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288044
Get-NetIPsecMainModeCryptoSet
Get-NetIPsecMainModeSA
New-NetIPsecMainModeCryptoSet
New-NetIPsecPhase2AuthSet
New-NetIPSecRule
Rename-NetIPsecMainModeCryptoSet
Open-NetGPO
Save-NetGPO
Set-NetIPsecMainModeCryptoSet
Set-NetIPsecMainModeRule
Set-NetIPsecRule
New-NetIPsecAuthProposal
New-NetIPsecMainModeCryptoProposal
New-GPO