< Back
Remove-NetIPsecPhase2AuthSet
Post
NAME Remove-NetIPsecPhase2AuthSet
SYNOPSIS
Deletes all of the phase 2 authentication sets that match the specified criteria.
SYNTAX
Remove-NetIPsecPhase2AuthSet [-All] [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>]
[-ThrottleLimit <Int32>] [-TracePolicyStore] [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-PassThru] [-ThrottleLimit <Int32>] -InputObject <CimInstance[]> [-Confirm]
[-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-Description <String[]>] [-DisplayGroup <String[]>] [-GPOSession <String>]
[-Group <String[]>] [-PassThru] [-PolicyStore <String>] [-PolicyStoreSource <String[]>] [-PolicyStoreSourceType <PolicyStoreType[]>]
[-PrimaryStatus <PrimaryStatus[]>] [-Status <String[]>] [-ThrottleLimit <Int32>] [-TracePolicyStore] [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>] [-ThrottleLimit
<Int32>] [-TracePolicyStore] -DisplayName <String[]> [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>]
[-ThrottleLimit <Int32>] [-TracePolicyStore] [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>] [-ThrottleLimit
<Int32>] [-TracePolicyStore] -AssociatedNetIPsecRule <CimInstance> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Remove-NetIPsecPhase2AuthSet cmdlet permanently deletes one or more phase 2 authentication sets from the specified policy store.
This cmdlet gets one or more authorization sets to be deleted with the Name parameter (default), the DisplayName parameter, the Group parameter,
or by associated IPsec rule. The resulting queried set is deleted from the computer.
PARAMETERS
-All [<SwitchParameter>]
Indicates that all of the phase 2 authentication sets within the specified policy store are removed.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AssociatedNetIPsecRule <CimInstance>
Gets the phase 2 authentication sets that are associated, via the pipeline, with the input IPsec rule to be removed.
A NetIPsecRule object represents an IPsec rule, which determines IPsec behavior. An IPsec rule can be associated with Phase1AuthSet,
Phase2AuthSet, and NetIPsecQuickMode cryptographic sets. See the New-NetIPsecMainModeRule cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description <String[]>
Specifies that matching phase 2 authentication sets of the indicated description are removed. Wildcard characters are accepted.
This parameter provides information about the phase 2 authentication rule. This parameter specifies a localized, user-facing description of
the object.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayGroup <String[]>
Specifies that only matching phase 2 authentication sets of the indicated group association are removed. Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a localizable string, then the Group
parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the
Set-NetIPsecPhase2AuthSet cmdlet, if the group name is specified for a set of rules, then all of the rules in that group receive the same set
of modifications. It is good practice to specify the Group parameter with a universal and world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetIPsecPhase2AuthSet cmdlet, but can be modified using dot
notation and the Set-NetIPsecPhase2AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayName <String[]>
Specifies that only matching phase 2 authentication sets of the indicated display name are removed. Wildcard characters are accepted.
This parameter specifies the localized, user-facing name of the phase 2 authentication set being created. When creating a set this parameter
is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain
circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a
randomly assigned value.
Note: This parameter value cannot be All.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the sets to be removed.
This parameter is used in the same way as the PolicyStore parameter. When modifying Group Policy objects (GPOs) in Windows PowerShell????, each
change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and
resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back.
This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO
Session, use the Save-NetGPO cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Group <String[]>
Specifies that only matching phase 2 authentication sets of the indicated group association are removed. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then
this parameter contains an indirect string. Rule groups organizes rules by influence and allows batch rule modifications. Using the
Set-NetIPsecPhase2AuthSet cmdlet, if the group name is specified for a set of rules, then all of the rules in that group receive the same set
of modifications. It is a good practice to specify this parameter with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecPhase2AuthSet cmdlet, but can be modified
using dot notation and the Set-NetIPsecPhase2AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Name <String[]>
Specifies that only matching phase 2 authentication sets of the indicated name are removed. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy
processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only
one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific
names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. Since GPOs
can have precedence, if an administrator gives a rule with a different or more specific rule the same name in a higher-precedence GPO, then it
overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for phase 2 encryption are overridden, specify the customized parameters and set this parameter value, making this parameter
the new default setting for encryption.
Required? true
Position? 1
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the sets to be removed.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- Group Policy Objects (GPOs) are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecPhase2AuthSet cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at
creation time with the Copy-NetIPsecPhase2AuthSet cmdlet or with the New-NetIPsecPhase2AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSource <String[]>
Specifies that phase 2 authentication sets that match the indicated policy store source are removed.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from the ActiveStore with the
TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This parameter value cannot always be
passed into the PolicyStore parameter. Domain GPOs are one example in which this parameter contains only the GPO name, not the domain name.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSourceType <PolicyStoreType[]>
Specifies that phase 2 authentication sets that match the indicated policy store source type are removed.
This parameter describes the type of policy store where the rule originated if the object is retrieved from the ActiveStore with the
TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The acceptable values for this parameter are:??
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use in the cmdlets, but may appear
when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in the cmdlets, but may appear when
monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active
policy.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PrimaryStatus <PrimaryStatus[]>
Specifies that phase 2 authentication sets that match the indicated primary status are removed.
This parameter describes the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.
See the Status and StatusCode fields of the object for more detailed status information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Status <String[]>
Specifies that phase 2 authentication sets that match the indicated status are removed.
This parameter describes the status message for the specified status code value. The status code is a numerical value that indicates any
syntax, parsing, or run-time errors in the rule. This parameter value should not be modified.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-TracePolicyStore [<SwitchParameter>]
Indicates that the phase 2 authentication sets that match the indicated policy store are removed.
This parameter specifies that the name of the source GPO is queried and set to the PolicyStoreSource parameter value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetConSecRule[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetIKEP2AuthSet[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
None
EXAMPLE 1
PS C:\\>Remove-NetIPsecPhase2AuthSet
This example removes all of the static local phase 1 authentication sets. This cmdlet is useful for removing any policy that conflicts with the
domain GPO.
EXAMPLE 2
PS C:\\>Remove-NetIPsecPhase2AuthSet -DisplayName "Home LAN - Phase 2 Auth Set"
This example deletes a set based on the localized name.
EXAMPLE 3
PS C:\\>$ipsRule = Get-NetIPsecRule ????????DisplayName "Transport Mode - Extranet IPv4"
PS C:\\>Remove-NetIPsecPhase2AuthSet ????????InputObject $ipsRule
This example removes all of the phase 2 authentication sets that are associated with an IPsec rule.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288196
Get-NetIPsecRule
New-NetIPsecMainModeRule
New-NetIPsecPhase2AuthSet
Open-NetGPO
Save-NetGPO
Set-NetIPsecPhase2AuthSet
New-GPO
SYNOPSIS
Deletes all of the phase 2 authentication sets that match the specified criteria.
SYNTAX
Remove-NetIPsecPhase2AuthSet [-All] [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>]
[-ThrottleLimit <Int32>] [-TracePolicyStore] [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-PassThru] [-ThrottleLimit <Int32>] -InputObject <CimInstance[]> [-Confirm]
[-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-Description <String[]>] [-DisplayGroup <String[]>] [-GPOSession <String>]
[-Group <String[]>] [-PassThru] [-PolicyStore <String>] [-PolicyStoreSource <String[]>] [-PolicyStoreSourceType <PolicyStoreType[]>]
[-PrimaryStatus <PrimaryStatus[]>] [-Status <String[]>] [-ThrottleLimit <Int32>] [-TracePolicyStore] [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>] [-ThrottleLimit
<Int32>] [-TracePolicyStore] -DisplayName <String[]> [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>]
[-ThrottleLimit <Int32>] [-TracePolicyStore] [-Confirm] [-WhatIf] [<CommonParameters>]
Remove-NetIPsecPhase2AuthSet [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-PassThru] [-PolicyStore <String>] [-ThrottleLimit
<Int32>] [-TracePolicyStore] -AssociatedNetIPsecRule <CimInstance> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Remove-NetIPsecPhase2AuthSet cmdlet permanently deletes one or more phase 2 authentication sets from the specified policy store.
This cmdlet gets one or more authorization sets to be deleted with the Name parameter (default), the DisplayName parameter, the Group parameter,
or by associated IPsec rule. The resulting queried set is deleted from the computer.
PARAMETERS
-All [<SwitchParameter>]
Indicates that all of the phase 2 authentication sets within the specified policy store are removed.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AssociatedNetIPsecRule <CimInstance>
Gets the phase 2 authentication sets that are associated, via the pipeline, with the input IPsec rule to be removed.
A NetIPsecRule object represents an IPsec rule, which determines IPsec behavior. An IPsec rule can be associated with Phase1AuthSet,
Phase2AuthSet, and NetIPsecQuickMode cryptographic sets. See the New-NetIPsecMainModeRule cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description <String[]>
Specifies that matching phase 2 authentication sets of the indicated description are removed. Wildcard characters are accepted.
This parameter provides information about the phase 2 authentication rule. This parameter specifies a localized, user-facing description of
the object.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayGroup <String[]>
Specifies that only matching phase 2 authentication sets of the indicated group association are removed. Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a localizable string, then the Group
parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the
Set-NetIPsecPhase2AuthSet cmdlet, if the group name is specified for a set of rules, then all of the rules in that group receive the same set
of modifications. It is good practice to specify the Group parameter with a universal and world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetIPsecPhase2AuthSet cmdlet, but can be modified using dot
notation and the Set-NetIPsecPhase2AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayName <String[]>
Specifies that only matching phase 2 authentication sets of the indicated display name are removed. Wildcard characters are accepted.
This parameter specifies the localized, user-facing name of the phase 2 authentication set being created. When creating a set this parameter
is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain
circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a
randomly assigned value.
Note: This parameter value cannot be All.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the sets to be removed.
This parameter is used in the same way as the PolicyStore parameter. When modifying Group Policy objects (GPOs) in Windows PowerShell????, each
change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and
resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back.
This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO
Session, use the Save-NetGPO cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Group <String[]>
Specifies that only matching phase 2 authentication sets of the indicated group association are removed. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then
this parameter contains an indirect string. Rule groups organizes rules by influence and allows batch rule modifications. Using the
Set-NetIPsecPhase2AuthSet cmdlet, if the group name is specified for a set of rules, then all of the rules in that group receive the same set
of modifications. It is a good practice to specify this parameter with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecPhase2AuthSet cmdlet, but can be modified
using dot notation and the Set-NetIPsecPhase2AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Name <String[]>
Specifies that only matching phase 2 authentication sets of the indicated name are removed. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy
processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only
one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific
names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. Since GPOs
can have precedence, if an administrator gives a rule with a different or more specific rule the same name in a higher-precedence GPO, then it
overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for phase 2 encryption are overridden, specify the customized parameters and set this parameter value, making this parameter
the new default setting for encryption.
Required? true
Position? 1
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the sets to be removed.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- Group Policy Objects (GPOs) are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecPhase2AuthSet cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at
creation time with the Copy-NetIPsecPhase2AuthSet cmdlet or with the New-NetIPsecPhase2AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSource <String[]>
Specifies that phase 2 authentication sets that match the indicated policy store source are removed.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from the ActiveStore with the
TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This parameter value cannot always be
passed into the PolicyStore parameter. Domain GPOs are one example in which this parameter contains only the GPO name, not the domain name.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSourceType <PolicyStoreType[]>
Specifies that phase 2 authentication sets that match the indicated policy store source type are removed.
This parameter describes the type of policy store where the rule originated if the object is retrieved from the ActiveStore with the
TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The acceptable values for this parameter are:??
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use in the cmdlets, but may appear
when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in the cmdlets, but may appear when
monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active
policy.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PrimaryStatus <PrimaryStatus[]>
Specifies that phase 2 authentication sets that match the indicated primary status are removed.
This parameter describes the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.
See the Status and StatusCode fields of the object for more detailed status information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Status <String[]>
Specifies that phase 2 authentication sets that match the indicated status are removed.
This parameter describes the status message for the specified status code value. The status code is a numerical value that indicates any
syntax, parsing, or run-time errors in the rule. This parameter value should not be modified.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-TracePolicyStore [<SwitchParameter>]
Indicates that the phase 2 authentication sets that match the indicated policy store are removed.
This parameter specifies that the name of the source GPO is queried and set to the PolicyStoreSource parameter value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetConSecRule[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetIKEP2AuthSet[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
None
EXAMPLE 1
PS C:\\>Remove-NetIPsecPhase2AuthSet
This example removes all of the static local phase 1 authentication sets. This cmdlet is useful for removing any policy that conflicts with the
domain GPO.
EXAMPLE 2
PS C:\\>Remove-NetIPsecPhase2AuthSet -DisplayName "Home LAN - Phase 2 Auth Set"
This example deletes a set based on the localized name.
EXAMPLE 3
PS C:\\>$ipsRule = Get-NetIPsecRule ????????DisplayName "Transport Mode - Extranet IPv4"
PS C:\\>Remove-NetIPsecPhase2AuthSet ????????InputObject $ipsRule
This example removes all of the phase 2 authentication sets that are associated with an IPsec rule.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288196
Get-NetIPsecRule
New-NetIPsecMainModeRule
New-NetIPsecPhase2AuthSet
Open-NetGPO
Save-NetGPO
Set-NetIPsecPhase2AuthSet
New-GPO