< Back
Set-NetFirewallPortFilter
Post
NAME Set-NetFirewallPortFilter
SYNOPSIS
Modifies port filter objects, thereby modifying the protocol and port conditions using the Protocol, LocalPort, RemotePort, IcmpType, and
DynamicTransport parameters of the firewall or IPsec rules.
SYNTAX
Set-NetFirewallPortFilter [-AsJob] [-CimSession <CimSession[]>] [-DynamicTarget <DynamicTransport>] [-GPOSession <String>] [-IcmpType <String[]>]
[-LocalPort <String[]>] [-PassThru] [-PolicyStore <String>] [-Protocol <String>] [-RemotePort <String[]>] [-ThrottleLimit <Int32>] [-Confirm]
[-WhatIf] [<CommonParameters>]
Set-NetFirewallPortFilter [-AsJob] [-CimSession <CimSession[]>] [-DynamicTarget <DynamicTransport>] [-IcmpType <String[]>] [-LocalPort <String[]>]
[-PassThru] [-Protocol <String>] [-RemotePort <String[]>] [-ThrottleLimit <Int32>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The Set-NetFirewallPortFilter cmdlet modifies the protocol and port conditions using the Protocol, LocalPort, RemotePort, IcmpType, and
DynamicTransport parameters associated with the input firewall or IPsec rules.
See the Get-NetFirewallPortFilter cmdlet for more information about the interface type filters.
To modify the port and protocol conditions, two methods can be used starting with the port filters returned by the Get-NetFirewallPortFilter
cmdlet and optional additional querying.
-- The network firewall port filter objects are piped into the Get-NetFirewallRule or Get-NetIPsecrule cmdlet. The Get-NetFirewallRule or
Get-NetIPsecrule cmdlet returns the rules associated with the filters and pipes the rules into the Set-NetFirewallRule or Set-NetIPsecrule cmdlet
which configures the interface properties.
-- Alternatively, the network firewall port filter objects are piped directly to this cmdlet, which modifies the Protocol, LocalPort, RemotePort,
IcmpType, and DynamicTransport parameters values of the rules.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DynamicTarget <DynamicTransport>
Specifies a dynamic transport. The cmdlet sets the protocol and port conditions for the input rules that have the dynamic transport that you
specify.The acceptable values for this parameter are:
-- Any
-- ProximityApps
-- ProximitySharing
-- WifiDirectPrinting
-- WifiDirectDisplay
-- WifiDirectDevices
The default value is Any.
Some types of dynamic transports, such as proximity sharing, abstract the network layer details. This means that you cannot use standard
network layer conditions, such as protocols and ports, to identify the dynamic transports.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the rules to be modified.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell????, each change to a GPO requires
the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A
GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the
DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO
cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IcmpType <String[]>
Specifies the Internet Control Message Protocol (ICMP) type codes. The key encoding is specified by running the Set-NetFirewallSetting cmdlet
with the KeyEncoding parameter.
The acceptable values for this parameter are:??
-- ICMP type code: 0 through 255
-- ICMP type code pairs: 3:4
-- Keyword: Any.
Note: A rule can be queried for this condition, or modified by using the security filter object. See the Get-NetFirewallPortFilter cmdlet for
more information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-LocalPort <String[]>
Specifies that network packets with matching IP port numbers match this rule. This parameter value is the first end point of an IPsec rule.
The acceptable value is a port, range, or keyword and depends on the protocol.
If the Protocol parameter value is TCP or UDP, then the acceptable values for this parameter are:
-- Port range: 0 through 65535.
-- Port number: 80.
-- Keyword: Any.
If the Protocol parameter value is ICMPv4 or ICMPv6, then the acceptable values for this parameter are:
-- An ICMP type, code pair: 0, 8.
-- Type and code: 0 through 255.
-- Keyword: Any.
If the Protocol parameter is not specified, then the acceptable values for this parameter are: Any, RPC, RPC-EPMap, or IPHTTPS.
Note: IPHTTPS is only supported on Windows Server 2012.
Note: Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallPortFilter cmdlet for more
information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the rules to be modified.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at
creation time with the Copy-NetFirewallRule cmdlet or with the New-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Protocol <String>
Specifies that network packets with matching IP addresses match this rule. This parameter specifies the protocol for an IPsec rule.
The acceptable values for this parameter are:??
-- Protocols by number: 0 to 255.
-- Protocols by name: TCP, UDP, ICMPv4, or ICMPv6.
If a port number is identified by using port1 or port2, then this parameter must be set to TCP or UDP.
The values ICMPv4 and ICMPv6 create a rule that exempts ICMP network traffic from the IPsec requirements of another rule.
The default value is Any.
Note: Querying for rules with this parameter can only be performed using filter objects.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-RemotePort <String[]>
Specifies that network packets with matching IP port numbers match this rule. This parameter value is the second end point of an IPsec rule.
The acceptable value is a port, range, or keyword and depends on the protocol.
If the protocol is TCP or UDP, then the acceptable values for this parameter are:
-- Port range: 0 through 65535
-- Port number: 80
-- Keyword: Any
If the protocol is ICMPv4 or ICMPv6, then the acceptable values for this parameter are:
-- An ICMP type, code pair: 0, 8
-- Type and code: 0 through 255
-- Keyword: Any.
If a protocol is not specified, then the acceptable values for this parameter are: Any, RPC, RPC-EPMap, or IPHTTPS.
Note: IPHTTPS is only supported on Windows Server 2012.
Note: Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallPortFilter cmdlet for more
information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetProtocolPortFilter[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetProtocolPortFilter[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
EXAMPLE 1
PS C:\\>$nfPortFilter = Get-FirewallRule ????????DisplayName "Play To streaming server" | Get-NetFirewallPortFilter
PS C:\\>Set-NetFirewallPortFilter ????????LocalPort 10246 ????????InputObject $nfPortFilter
This cmdlet can be run using only the pipeline.
PS C:\\>Get-FirewallRule ????????DisplayName "Play To streaming server" | Get-NetFirewallPortFilter | Set-NetFirewallPortFilter ????????LocalPort 10246
This cmdlet can be run without the pipeline.
PS C:\\>Set-NetFirewallRule ????????DisplayName "Play To streaming server" ????????LocalPort 10246
This example modifies the LocalPort parameter value of the specified firewall rule.
EXAMPLE 2
PS C:\\>$nfPortFilter = Get-NetFirewallPortFilter
PS C:\\>$nfPortFilter10246 = Where-Object ????????FilterScript { $_.LocalPort -Eq "10246" } ????????InputObject $nfPortFilter
PS C:\\>Set-NetFirewallPortFilter ????????LocalPort Any ????????InputObject $nfPortFilter10246
This cmdlet can be run using only the pipeline.
PS C:\\>Get-NetFirewallPortFilter | Where-Object ????????FilterScript { $_.LocalPort -Eq "10246" } | Set-NetFirewallPortFilter ????????LocalPort Any
This example modifies all of the rules associated with a specific port.
EXAMPLE 3
PS C:\\>$nfPortFilter = Get-NetFirewallRule ????????DisplayGroup "File and Printer Sharing" | Get-NetFirewallPortFilter
PS C:\\>$nfPortFilter137 = Where-Object ????????FilterScript { $_.RemotePort ????????Eq "137" } ????????InputObject $nfPortFilter
PS C:\\>Set-NetFirewallPortFilter ????????LocalPort Any ????????InputObject $nfPortFilter137
This cmdlet can be run using only the pipeline.
PS C:\\>Get-NetFirewallRule ????????DisplayGroup "File and Printer Sharing" | Get-NetFirewallPortFilter | Where-Object ????????FilterScript { $_.RemotePort ????????Eq
"137" } | Set-NetFirewallPortFilter ????????LocalPort Any
This example modifies the interface type associated with all of the firewall rules in a specified group.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288214
Where-Object
Copy-NetIPsecRule
Get-NetFirewallPortFilter
Get-NetFirewallRule
Get-NetIPSecRule
New-NetFirewallRule
New-NetIPSecRule
Set-NetFirewallRule
Set-NetFirewallSetting
Set-NetIPsecRule
New-GPO
SYNOPSIS
Modifies port filter objects, thereby modifying the protocol and port conditions using the Protocol, LocalPort, RemotePort, IcmpType, and
DynamicTransport parameters of the firewall or IPsec rules.
SYNTAX
Set-NetFirewallPortFilter [-AsJob] [-CimSession <CimSession[]>] [-DynamicTarget <DynamicTransport>] [-GPOSession <String>] [-IcmpType <String[]>]
[-LocalPort <String[]>] [-PassThru] [-PolicyStore <String>] [-Protocol <String>] [-RemotePort <String[]>] [-ThrottleLimit <Int32>] [-Confirm]
[-WhatIf] [<CommonParameters>]
Set-NetFirewallPortFilter [-AsJob] [-CimSession <CimSession[]>] [-DynamicTarget <DynamicTransport>] [-IcmpType <String[]>] [-LocalPort <String[]>]
[-PassThru] [-Protocol <String>] [-RemotePort <String[]>] [-ThrottleLimit <Int32>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The Set-NetFirewallPortFilter cmdlet modifies the protocol and port conditions using the Protocol, LocalPort, RemotePort, IcmpType, and
DynamicTransport parameters associated with the input firewall or IPsec rules.
See the Get-NetFirewallPortFilter cmdlet for more information about the interface type filters.
To modify the port and protocol conditions, two methods can be used starting with the port filters returned by the Get-NetFirewallPortFilter
cmdlet and optional additional querying.
-- The network firewall port filter objects are piped into the Get-NetFirewallRule or Get-NetIPsecrule cmdlet. The Get-NetFirewallRule or
Get-NetIPsecrule cmdlet returns the rules associated with the filters and pipes the rules into the Set-NetFirewallRule or Set-NetIPsecrule cmdlet
which configures the interface properties.
-- Alternatively, the network firewall port filter objects are piped directly to this cmdlet, which modifies the Protocol, LocalPort, RemotePort,
IcmpType, and DynamicTransport parameters values of the rules.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DynamicTarget <DynamicTransport>
Specifies a dynamic transport. The cmdlet sets the protocol and port conditions for the input rules that have the dynamic transport that you
specify.The acceptable values for this parameter are:
-- Any
-- ProximityApps
-- ProximitySharing
-- WifiDirectPrinting
-- WifiDirectDisplay
-- WifiDirectDevices
The default value is Any.
Some types of dynamic transports, such as proximity sharing, abstract the network layer details. This means that you cannot use standard
network layer conditions, such as protocols and ports, to identify the dynamic transports.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the network GPO from which to retrieve the rules to be modified.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell????, each change to a GPO requires
the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A
GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the
DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO
cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IcmpType <String[]>
Specifies the Internet Control Message Protocol (ICMP) type codes. The key encoding is specified by running the Set-NetFirewallSetting cmdlet
with the KeyEncoding parameter.
The acceptable values for this parameter are:??
-- ICMP type code: 0 through 255
-- ICMP type code pairs: 3:4
-- Keyword: Any.
Note: A rule can be queried for this condition, or modified by using the security filter object. See the Get-NetFirewallPortFilter cmdlet for
more information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-LocalPort <String[]>
Specifies that network packets with matching IP port numbers match this rule. This parameter value is the first end point of an IPsec rule.
The acceptable value is a port, range, or keyword and depends on the protocol.
If the Protocol parameter value is TCP or UDP, then the acceptable values for this parameter are:
-- Port range: 0 through 65535.
-- Port number: 80.
-- Keyword: Any.
If the Protocol parameter value is ICMPv4 or ICMPv6, then the acceptable values for this parameter are:
-- An ICMP type, code pair: 0, 8.
-- Type and code: 0 through 255.
-- Keyword: Any.
If the Protocol parameter is not specified, then the acceptable values for this parameter are: Any, RPC, RPC-EPMap, or IPHTTPS.
Note: IPHTTPS is only supported on Windows Server 2012.
Note: Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallPortFilter cmdlet for more
information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the rules to be modified.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:??
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from
GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are
attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is
the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the
PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ ????????PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ ????????PolicyStore domain.fqdn.com\\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server???? 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and
product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In
addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at
creation time with the Copy-NetFirewallRule cmdlet or with the New-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Protocol <String>
Specifies that network packets with matching IP addresses match this rule. This parameter specifies the protocol for an IPsec rule.
The acceptable values for this parameter are:??
-- Protocols by number: 0 to 255.
-- Protocols by name: TCP, UDP, ICMPv4, or ICMPv6.
If a port number is identified by using port1 or port2, then this parameter must be set to TCP or UDP.
The values ICMPv4 and ICMPv6 create a rule that exempts ICMP network traffic from the IPsec requirements of another rule.
The default value is Any.
Note: Querying for rules with this parameter can only be performed using filter objects.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-RemotePort <String[]>
Specifies that network packets with matching IP port numbers match this rule. This parameter value is the second end point of an IPsec rule.
The acceptable value is a port, range, or keyword and depends on the protocol.
If the protocol is TCP or UDP, then the acceptable values for this parameter are:
-- Port range: 0 through 65535
-- Port number: 80
-- Keyword: Any
If the protocol is ICMPv4 or ICMPv6, then the acceptable values for this parameter are:
-- An ICMP type, code pair: 0, 8
-- Type and code: 0 through 255
-- Keyword: Any.
If a protocol is not specified, then the acceptable values for this parameter are: Any, RPC, RPC-EPMap, or IPHTTPS.
Note: IPHTTPS is only supported on Windows Server 2012.
Note: Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallPortFilter cmdlet for more
information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetProtocolPortFilter[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetProtocolPortFilter[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
EXAMPLE 1
PS C:\\>$nfPortFilter = Get-FirewallRule ????????DisplayName "Play To streaming server" | Get-NetFirewallPortFilter
PS C:\\>Set-NetFirewallPortFilter ????????LocalPort 10246 ????????InputObject $nfPortFilter
This cmdlet can be run using only the pipeline.
PS C:\\>Get-FirewallRule ????????DisplayName "Play To streaming server" | Get-NetFirewallPortFilter | Set-NetFirewallPortFilter ????????LocalPort 10246
This cmdlet can be run without the pipeline.
PS C:\\>Set-NetFirewallRule ????????DisplayName "Play To streaming server" ????????LocalPort 10246
This example modifies the LocalPort parameter value of the specified firewall rule.
EXAMPLE 2
PS C:\\>$nfPortFilter = Get-NetFirewallPortFilter
PS C:\\>$nfPortFilter10246 = Where-Object ????????FilterScript { $_.LocalPort -Eq "10246" } ????????InputObject $nfPortFilter
PS C:\\>Set-NetFirewallPortFilter ????????LocalPort Any ????????InputObject $nfPortFilter10246
This cmdlet can be run using only the pipeline.
PS C:\\>Get-NetFirewallPortFilter | Where-Object ????????FilterScript { $_.LocalPort -Eq "10246" } | Set-NetFirewallPortFilter ????????LocalPort Any
This example modifies all of the rules associated with a specific port.
EXAMPLE 3
PS C:\\>$nfPortFilter = Get-NetFirewallRule ????????DisplayGroup "File and Printer Sharing" | Get-NetFirewallPortFilter
PS C:\\>$nfPortFilter137 = Where-Object ????????FilterScript { $_.RemotePort ????????Eq "137" } ????????InputObject $nfPortFilter
PS C:\\>Set-NetFirewallPortFilter ????????LocalPort Any ????????InputObject $nfPortFilter137
This cmdlet can be run using only the pipeline.
PS C:\\>Get-NetFirewallRule ????????DisplayGroup "File and Printer Sharing" | Get-NetFirewallPortFilter | Where-Object ????????FilterScript { $_.RemotePort ????????Eq
"137" } | Set-NetFirewallPortFilter ????????LocalPort Any
This example modifies the interface type associated with all of the firewall rules in a specified group.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288214
Where-Object
Copy-NetIPsecRule
Get-NetFirewallPortFilter
Get-NetFirewallRule
Get-NetIPSecRule
New-NetFirewallRule
New-NetIPSecRule
Set-NetFirewallRule
Set-NetFirewallSetting
Set-NetIPsecRule
New-GPO