< Back
Set-NetOffloadGlobalSetting
Post
NAME Set-NetOffloadGlobalSetting
SYNOPSIS
Modifies the global TCP/IP offload settings.
SYNTAX
Set-NetOffloadGlobalSetting [-Chimney {Disabled | Enabled | Automatic}] [-CimSession <CimSession[]>] [-NetworkDirect {Disabled | Enabled}]
[-NetworkDirectAcrossIPSubnets {Blocked | Allowed}] [-PacketCoalescingFilter {Disabled | Enabled}] [-PassThru] [-ReceiveSegmentCoalescing
{Disabled | Enabled}] [-ReceiveSideScaling {Disabled | Enabled}] [-TaskOffload {Disabled | Enabled}] [-ThrottleLimit <Int32>] [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The Set-NetOffloadGlobalSetting cmdlet modifies the global TCP/IP offload settings. The global settings include Receive Side Scaling, Receive
Segment Coalescing, task offload, and NetworkDirect properties.
PARAMETERS
-Chimney [<ChimneyEnum>]
Specifies the TCP Chimney global state on the computer. The acceptable values for this parameter are:
-- Enabled
-- Disabled
-- Automatic
The default value is Disabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-NetworkDirect [<EnabledDisabledEnum>]
Specifies the NetworkDirect Remote Direct Memory Access (RDMA) value on the computer. Use this parameter only on servers. The acceptable
values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-NetworkDirectAcrossIPSubnets [<AllowedBlockedEnum>]
Specifies a value for NetworkDirect connectivity from outside a local IP network. The acceptable values for this parameter are:
-- Allowed
-- Blocked
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-PacketCoalescingFilter [<EnabledDisabledEnum>]
Specifies the values for the packet-coalescing filter on the computer. To reduce the number of interrupts that a computer processes, the
packet-coalescing filter combines random broadcast and multicast packets, such as Address Resolution Protocol (ARP) requests, Neighbor
Discovery messages, and Simple Service Discovery Protocol (SSDP) requests, into a single packet. Use this parameter only on client computers.
The acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ReceiveSegmentCoalescing [<EnabledDisabledEnum>]
Specifies the Receive Segment Coalescing settings on the computer. Receive Segment Coalescing parses small packets of data and combines the
data into a single packet. Coalescing small packets into a single packet reduces the overhead that is required to process packets. The
acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ReceiveSideScaling [<EnabledDisabledEnum>]
Specifies the Receive Side Scaling settings on the computer. Receive Side Scaling distributes the network processing load across multiple
processor cores. The acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-TaskOffload [<EnabledDisabledEnum>]
Specifies the global TCP/IP task offload settings. Task offload settings include IP checksum offload, Internet Protocol security (IPsec) task
offload, and Large Send Offload. These features reduce the overhead of per-packet processing by distributing packet processing tasks, such as
checksum calculation, to a network adapter. A modification takes effect after a computer restarts or a network adapter restarts. The
acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetOffloadGlobalSetting
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
None
Example 1: Enable Receive Segment Coalescing
PS C:\\>Set-NetOffloadGlobalSetting ????????ReceiveSegmentCoalescing Enabled
This command enables Receive Segment Coalescing on the computer.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=289170
Get-NetOffloadGlobalSetting
SYNOPSIS
Modifies the global TCP/IP offload settings.
SYNTAX
Set-NetOffloadGlobalSetting [-Chimney {Disabled | Enabled | Automatic}] [-CimSession <CimSession[]>] [-NetworkDirect {Disabled | Enabled}]
[-NetworkDirectAcrossIPSubnets {Blocked | Allowed}] [-PacketCoalescingFilter {Disabled | Enabled}] [-PassThru] [-ReceiveSegmentCoalescing
{Disabled | Enabled}] [-ReceiveSideScaling {Disabled | Enabled}] [-TaskOffload {Disabled | Enabled}] [-ThrottleLimit <Int32>] [-Confirm] [-WhatIf]
[<CommonParameters>]
DESCRIPTION
The Set-NetOffloadGlobalSetting cmdlet modifies the global TCP/IP offload settings. The global settings include Receive Side Scaling, Receive
Segment Coalescing, task offload, and NetworkDirect properties.
PARAMETERS
-Chimney [<ChimneyEnum>]
Specifies the TCP Chimney global state on the computer. The acceptable values for this parameter are:
-- Enabled
-- Disabled
-- Automatic
The default value is Disabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-NetworkDirect [<EnabledDisabledEnum>]
Specifies the NetworkDirect Remote Direct Memory Access (RDMA) value on the computer. Use this parameter only on servers. The acceptable
values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-NetworkDirectAcrossIPSubnets [<AllowedBlockedEnum>]
Specifies a value for NetworkDirect connectivity from outside a local IP network. The acceptable values for this parameter are:
-- Allowed
-- Blocked
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-PacketCoalescingFilter [<EnabledDisabledEnum>]
Specifies the values for the packet-coalescing filter on the computer. To reduce the number of interrupts that a computer processes, the
packet-coalescing filter combines random broadcast and multicast packets, such as Address Resolution Protocol (ARP) requests, Neighbor
Discovery messages, and Simple Service Discovery Protocol (SSDP) requests, into a single packet. Use this parameter only on client computers.
The acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ReceiveSegmentCoalescing [<EnabledDisabledEnum>]
Specifies the Receive Segment Coalescing settings on the computer. Receive Segment Coalescing parses small packets of data and combines the
data into a single packet. Coalescing small packets into a single packet reduces the overhead that is required to process packets. The
acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ReceiveSideScaling [<EnabledDisabledEnum>]
Specifies the Receive Side Scaling settings on the computer. Receive Side Scaling distributes the network processing load across multiple
processor cores. The acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-TaskOffload [<EnabledDisabledEnum>]
Specifies the global TCP/IP task offload settings. Task offload settings include IP checksum offload, Internet Protocol security (IPsec) task
offload, and Large Send Offload. These features reduce the overhead of per-packet processing by distributing packet processing tasks, such as
checksum calculation, to a network adapter. A modification takes effect after a computer restarts or a network adapter restarts. The
acceptable values for this parameter are:
-- Enabled
-- Disabled
The default value is Enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetOffloadGlobalSetting
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
OUTPUTS
None
Example 1: Enable Receive Segment Coalescing
PS C:\\>Set-NetOffloadGlobalSetting ????????ReceiveSegmentCoalescing Enabled
This command enables Receive Segment Coalescing on the computer.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=289170
Get-NetOffloadGlobalSetting