< Back
Get-NetVirtualizationProviderAddress
Post
NAME Get-NetVirtualizationProviderAddress
SYNOPSIS
Gets Provider Addresses.
SYNTAX
Get-NetVirtualizationProviderAddress [-AddressState <AddressState[]>] [-CimSession <CimSession[]>]
[-InterfaceIndex <UInt32[]>] [-MACAddress <String[]>] [-ManagedByCluster <Boolean[]>] [-PrefixLength <Byte[]>]
[-ProviderAddress <String[]>] [-ThrottleLimit <Int32>] [-VlanID <UInt16[]>] [<CommonParameters>]
DESCRIPTION
The Get-NetVirtualizationProviderAddress cmdlet gets Provider Addresses configured in Microsoft???? Hyper-V???? Server
2016 Network Virtualization. A Provider Address is an IPv4 or IPv6 address that Network Virtualization uses for
multiple virtual Customer Addresses. For more information, see Network Virtualization technical details
(http://technet.microsoft.com/library/jj134174.aspx) on TechNet.
You can specify which Provider Addresses to get by using address state, interface index, prefix length, IP
address, or VLAN ID. You can use this cmdlet to get Provider Addresses for other cmdlets, such as the
Set-NetVirtualizationProviderAddress cmdlet or the Remove-NetVirtualizationProviderAddress cmdlet.
PARAMETERS
-AddressState [<AddressState[]>]
Specifies an array of states of Provider Addresses. The acceptable values for this parameter are:
-- Preferred. The address is unique.
-- Tentative. The address is not yet verified.
-- Duplicate. There is a duplicate address on the network.
-- Invalid. The address lifetime has expired.
-- Deprecated. The address cannot start new connections.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such
as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local
computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceIndex [<UInt32[]>]
Specifies an array of indexes for network interfaces that have Hyper-V Server 2016 Network Virtualization
enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-MACAddress [<String[]>]
Specifies an array of media access control (MAC) addresses that corresponds to the Provider Address.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ManagedByCluster [<Boolean[]>]
Specifies an array of Boolean values that determines whether a highly available Provider Address configuration
entry exists on a Hyper-V Network Virtualization gateway. If you use a Provider Address cluster resource, this
value is $True; otherwise, the value is $False. This parameter is a read-only parameter, used by an
administrator to diagnose problems.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-PrefixLength [<Byte[]>]
Specifies an array of lengths of IP prefixes.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ProviderAddress [<String[]>]
Specifies an array of IP addresses. You can use IPv4 and IPv6 addresses.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this
parameter is omitted or a value of 0 is entered, then Windows PowerShell???? calculates an optimum throttle limit
for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies
only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-VlanID [<UInt16[]>]
Specifies an array of IDs for VLANs for Provider Addresses.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
Example 1: Get Provider Addresses for an interface
PS C:\\> Get-NetVirtualizationProviderAddress -InterfaceIndex 13
This command gets the Provider Address for the interface with the specified index.
Example 2: Get a specific Provider Address
PS C:\\>Get-NetVirtualizationProviderAddress -ProviderAddress "172.16.2.3"
This command gets the Provider Address that has the IP address 172.16.2.3.
RELATED LINKS
New-NetVirtualizationProviderAddress
Remove-NetVirtualizationProviderAddress
Set-NetVirtualizationProviderAddress
SYNOPSIS
Gets Provider Addresses.
SYNTAX
Get-NetVirtualizationProviderAddress [-AddressState <AddressState[]>] [-CimSession <CimSession[]>]
[-InterfaceIndex <UInt32[]>] [-MACAddress <String[]>] [-ManagedByCluster <Boolean[]>] [-PrefixLength <Byte[]>]
[-ProviderAddress <String[]>] [-ThrottleLimit <Int32>] [-VlanID <UInt16[]>] [<CommonParameters>]
DESCRIPTION
The Get-NetVirtualizationProviderAddress cmdlet gets Provider Addresses configured in Microsoft???? Hyper-V???? Server
2016 Network Virtualization. A Provider Address is an IPv4 or IPv6 address that Network Virtualization uses for
multiple virtual Customer Addresses. For more information, see Network Virtualization technical details
(http://technet.microsoft.com/library/jj134174.aspx) on TechNet.
You can specify which Provider Addresses to get by using address state, interface index, prefix length, IP
address, or VLAN ID. You can use this cmdlet to get Provider Addresses for other cmdlets, such as the
Set-NetVirtualizationProviderAddress cmdlet or the Remove-NetVirtualizationProviderAddress cmdlet.
PARAMETERS
-AddressState [<AddressState[]>]
Specifies an array of states of Provider Addresses. The acceptable values for this parameter are:
-- Preferred. The address is unique.
-- Tentative. The address is not yet verified.
-- Duplicate. There is a duplicate address on the network.
-- Invalid. The address lifetime has expired.
-- Deprecated. The address cannot start new connections.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such
as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local
computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceIndex [<UInt32[]>]
Specifies an array of indexes for network interfaces that have Hyper-V Server 2016 Network Virtualization
enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-MACAddress [<String[]>]
Specifies an array of media access control (MAC) addresses that corresponds to the Provider Address.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ManagedByCluster [<Boolean[]>]
Specifies an array of Boolean values that determines whether a highly available Provider Address configuration
entry exists on a Hyper-V Network Virtualization gateway. If you use a Provider Address cluster resource, this
value is $True; otherwise, the value is $False. This parameter is a read-only parameter, used by an
administrator to diagnose problems.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-PrefixLength [<Byte[]>]
Specifies an array of lengths of IP prefixes.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ProviderAddress [<String[]>]
Specifies an array of IP addresses. You can use IPv4 and IPv6 addresses.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this
parameter is omitted or a value of 0 is entered, then Windows PowerShell???? calculates an optimum throttle limit
for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies
only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-VlanID [<UInt16[]>]
Specifies an array of IDs for VLANs for Provider Addresses.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
Example 1: Get Provider Addresses for an interface
PS C:\\> Get-NetVirtualizationProviderAddress -InterfaceIndex 13
This command gets the Provider Address for the interface with the specified index.
Example 2: Get a specific Provider Address
PS C:\\>Get-NetVirtualizationProviderAddress -ProviderAddress "172.16.2.3"
This command gets the Provider Address that has the IP address 172.16.2.3.
RELATED LINKS
New-NetVirtualizationProviderAddress
Remove-NetVirtualizationProviderAddress
Set-NetVirtualizationProviderAddress