< Back
Get-NetVirtualizationProviderRoute
Post
NAME Get-NetVirtualizationProviderRoute
SYNOPSIS
Gets physical network routes for a virtualized network.
SYNTAX
Get-NetVirtualizationProviderRoute [-CimSession <CimSession[]>] [-DestinationPrefix <String[]>] [-InterfaceIndex
<UInt32[]>] [-Metric <UInt32[]>] [-NextHop <String[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-NetVirtualizationProviderRoute cmdlet gets physical network routes for a Microsoft???? Hyper-V???? Server 2016
virtual network. Network Virtualization allows for more than one virtual network to exist on the same physical
network. Computers can exchange network traffic with a virtual machine by using a Customer Address in the virtual
network. Network Virtualization uses Provider Routes to direct network traffic on the physical network. For more
information, see Network Virtualization technical details (http://technet.microsoft.com/library/jj134174.aspx) on
TechNet.
You can specify Provider Routes by using any combination of the following:
-- Destination
-- Interface
-- Metric
-- Next hop gateway
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such
as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local
computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-DestinationPrefix [<String[]>]
Specifies an array of IP prefixes, as strings, for destination networks. You can specify IPv4 and IPv6
addresses. Use prefix notation: 0.0.0.0/0.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceIndex [<UInt32[]>]
Specifies an array of indexes for network interfaces that have Hyper-V Server 2016 Network Virtualization
enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Metric [<UInt32[]>]
Specifies an array of integer values. Network Virtualization selects the route that has the lowest metric
value from a group of usable routes.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-NextHop [<String[]>]
Specifies an array of IP addresses for next hop gateways.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this
parameter is omitted or a value of 0 is entered, then Windows PowerShell???? calculates an optimum throttle limit
for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies
only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
Example 1: Get provider routes for a specified interface
PS C:\\> Get-NetVirtualizationProviderRoute -InterfaceIndex 21
This command gets the provider routes for the interface that has the interface index 21.
Example 2: Get provider routes for destination prefix
PS C:\\>Get-NetVirtualizationProviderRoute -DestinationPrefix "172.16.0.0/16"
This command gets the provider routes that have the specified destination prefix.
RELATED LINKS
New-NetVirtualizationProviderRoute
Remove-NetVirtualizationProviderRoute
Set-NetVirtualizationProviderRoute
SYNOPSIS
Gets physical network routes for a virtualized network.
SYNTAX
Get-NetVirtualizationProviderRoute [-CimSession <CimSession[]>] [-DestinationPrefix <String[]>] [-InterfaceIndex
<UInt32[]>] [-Metric <UInt32[]>] [-NextHop <String[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-NetVirtualizationProviderRoute cmdlet gets physical network routes for a Microsoft???? Hyper-V???? Server 2016
virtual network. Network Virtualization allows for more than one virtual network to exist on the same physical
network. Computers can exchange network traffic with a virtual machine by using a Customer Address in the virtual
network. Network Virtualization uses Provider Routes to direct network traffic on the physical network. For more
information, see Network Virtualization technical details (http://technet.microsoft.com/library/jj134174.aspx) on
TechNet.
You can specify Provider Routes by using any combination of the following:
-- Destination
-- Interface
-- Metric
-- Next hop gateway
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such
as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local
computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-DestinationPrefix [<String[]>]
Specifies an array of IP prefixes, as strings, for destination networks. You can specify IPv4 and IPv6
addresses. Use prefix notation: 0.0.0.0/0.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceIndex [<UInt32[]>]
Specifies an array of indexes for network interfaces that have Hyper-V Server 2016 Network Virtualization
enabled.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Metric [<UInt32[]>]
Specifies an array of integer values. Network Virtualization selects the route that has the lowest metric
value from a group of usable routes.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-NextHop [<String[]>]
Specifies an array of IP addresses for next hop gateways.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this
parameter is omitted or a value of 0 is entered, then Windows PowerShell???? calculates an optimum throttle limit
for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies
only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
Example 1: Get provider routes for a specified interface
PS C:\\> Get-NetVirtualizationProviderRoute -InterfaceIndex 21
This command gets the provider routes for the interface that has the interface index 21.
Example 2: Get provider routes for destination prefix
PS C:\\>Get-NetVirtualizationProviderRoute -DestinationPrefix "172.16.0.0/16"
This command gets the provider routes that have the specified destination prefix.
RELATED LINKS
New-NetVirtualizationProviderRoute
Remove-NetVirtualizationProviderRoute
Set-NetVirtualizationProviderRoute