< Back
Get-Net6to4Configuration
Post
NAME Get-Net6to4Configuration
SYNOPSIS
Retrieves the 6to4 configuration of a computer or a Group Policy Object (GPO).
SYNTAX
Get-Net6to4Configuration [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-IPInterface <CimInstance>] [-PolicyStore <String>]
[-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-Net6to4Configuration cmdlet retrieves the 6to4 configuration of a computer or a Group Policy Object (GPO).
6to4 is an address assignment and router-to-router automatic tunneling technology that is described in RFC 3056: Connection of IPv6 Domains via
IPv4 Clouds. 6to4 provides a globally-routable IPv6 address to a host with a public IPv4 address. This IPv6 address can be used to connect to
other 6to4 hosts or the IPv6 Internet.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the Group Policy session from which to retrieve the configuration information.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPInterface <CimInstance>
Specifies the interface for which to retrieve the 6to4 configuration. If the interface is not a 6to4 interface, then the cmdlet does not
return any 6to4 configuration.
Required? false
Position? named
Default value
Accept pipeline input? true (ByValue)
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the configuration.
The acceptable values for this parameter are:??
-- ActiveStore
-- PersistentStore
-- GPO
To retrieve the configuration of a GPO, specify the GPO name using the following format: Domain\\GPOName
You cannot use this parameter with the GPOSession parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
This cmdlet accepts no input objects.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_Net6to4Configuration
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
This cmdlet returns a 6to4 configuration object.
Example 1: Get the 6to4 configuration
PS C:\\>Get-Net6to4Configuration
This command retrieves the 6to4 configuration of a computer or a GPO.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287456
Reset-Net6to4Configuration
Reset-Net6to4Configuration
SYNOPSIS
Retrieves the 6to4 configuration of a computer or a Group Policy Object (GPO).
SYNTAX
Get-Net6to4Configuration [-AsJob] [-CimSession <CimSession[]>] [-GPOSession <String>] [-IPInterface <CimInstance>] [-PolicyStore <String>]
[-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Get-Net6to4Configuration cmdlet retrieves the 6to4 configuration of a computer or a Group Policy Object (GPO).
6to4 is an address assignment and router-to-router automatic tunneling technology that is described in RFC 3056: Connection of IPv6 Domains via
IPv4 Clouds. 6to4 provides a globally-routable IPv6 address to a host with a public IPv4 address. This IPv6 address can be used to connect to
other 6to4 hosts or the IPv6 Internet.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the Group Policy session from which to retrieve the configuration information.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPInterface <CimInstance>
Specifies the interface for which to retrieve the 6to4 configuration. If the interface is not a 6to4 interface, then the cmdlet does not
return any 6to4 configuration.
Required? false
Position? named
Default value
Accept pipeline input? true (ByValue)
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store from which to retrieve the configuration.
The acceptable values for this parameter are:??
-- ActiveStore
-- PersistentStore
-- GPO
To retrieve the configuration of a GPO, specify the GPO name using the following format: Domain\\GPOName
You cannot use this parameter with the GPOSession parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
This cmdlet accepts no input objects.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_Net6to4Configuration
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
This cmdlet returns a 6to4 configuration object.
Example 1: Get the 6to4 configuration
PS C:\\>Get-Net6to4Configuration
This command retrieves the 6to4 configuration of a computer or a GPO.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287456
Reset-Net6to4Configuration
Reset-Net6to4Configuration