< Back
New-NetNatTransitionConfiguration
Post
NAME New-NetNatTransitionConfiguration
SYNOPSIS
Creates a new instance of the NAT64 and the associated configuration on a computer.
SYNTAX
New-NetNatTransitionConfiguration [-AsJob] [-CimSession <CimSession[]>] [-InboundInterface <String[]>] [-IPv4AddressPortPool <String[]>]
[-OutboundInterface <String[]>] [-PolicyStore <PolicyStore>] [-PrefixMapping <String[]>] [-State <State>] [-TcpMappingTimeoutSeconds <UInt32>]
[-ThrottleLimit <Int32>] -InstanceName <String> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The New-NetNatTransitionConfiguration creates the NAT64 instance and the associated configuration on a computer.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InboundInterface <String[]>
Sets the interface on which the NAT64 is listening for the matching incoming IPv6 traffic.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InstanceName <String>
Specifies the instance of the NAT64 which is being created.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPv4AddressPortPool <String[]>
Specifies the list of IPv4 address and port ranges to be used by NAT64 for creating the mappings from IPv6 source address to IPv4 target
address. The format is a comma-separated list of <IPv4 address,Lowport-Highport>. Such as "10.0.0.2,1024-3388","10.0.0.2,4000-49023". The port
value must be between 1024 and 65535. The wildcard character (*) can be specified to use the whole port range, such as 10.0.0.1,*.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-OutboundInterface <String[]>
Sets the interface on which the NAT64 sends the translated IPv4 traffic.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <PolicyStore>
Specifies to which policy store the NAT64 configuration is applied. The acceptable values for this parameter are: Persistent and Active. If
this parameter is not specified, then the cmdlet operates on both active and persistent stores.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PrefixMapping <String[]>
Sets the list of IPv6 address ranges to be translated by the NAT64. The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>. Such as
"69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8".
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-State <State>
Sets the enabled state of the NAT64 configuration.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-TcpMappingTimeoutSeconds <UInt32>
Specifies the lifetime for a TCP mapping after which it is released by the NAT64. The minimum value is 1800 seconds.
The default value is 7200 seconds.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetNatTransitionConfiguration
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1
PS C:\\>$nat64Prefix = "2009:1:2:3:4:5::/96"
PS C:\\>$prefixMapping = "$nat64Prefix,0.0.0.0/0"
PS C:\\>$portPool = "33.0.0.1,6000-10000"
PS C:\\>New-NetNatTransitionConfiguration -InstanceName NAT64 OutboundInterface corpnet -PrefixMapping $prefixMapping -IPv4AddressPortPool $portPool
This example creates a NAT64 configuration for the instance named NAT64.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287467
Disable-NetNatTransitionConfiguration
Enable-NetNatTransitionConfiguration
Get-NetNatTransitionConfiguration
Get-NetNatTransitionMonitoring
Remove-NetNatTransitionConfiguration
Set-NetNatTransitionConfiguration
SYNOPSIS
Creates a new instance of the NAT64 and the associated configuration on a computer.
SYNTAX
New-NetNatTransitionConfiguration [-AsJob] [-CimSession <CimSession[]>] [-InboundInterface <String[]>] [-IPv4AddressPortPool <String[]>]
[-OutboundInterface <String[]>] [-PolicyStore <PolicyStore>] [-PrefixMapping <String[]>] [-State <State>] [-TcpMappingTimeoutSeconds <UInt32>]
[-ThrottleLimit <Int32>] -InstanceName <String> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The New-NetNatTransitionConfiguration creates the NAT64 instance and the associated configuration on a computer.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InboundInterface <String[]>
Sets the interface on which the NAT64 is listening for the matching incoming IPv6 traffic.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InstanceName <String>
Specifies the instance of the NAT64 which is being created.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-IPv4AddressPortPool <String[]>
Specifies the list of IPv4 address and port ranges to be used by NAT64 for creating the mappings from IPv6 source address to IPv4 target
address. The format is a comma-separated list of <IPv4 address,Lowport-Highport>. Such as "10.0.0.2,1024-3388","10.0.0.2,4000-49023". The port
value must be between 1024 and 65535. The wildcard character (*) can be specified to use the whole port range, such as 10.0.0.1,*.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-OutboundInterface <String[]>
Sets the interface on which the NAT64 sends the translated IPv4 traffic.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <PolicyStore>
Specifies to which policy store the NAT64 configuration is applied. The acceptable values for this parameter are: Persistent and Active. If
this parameter is not specified, then the cmdlet operates on both active and persistent stores.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PrefixMapping <String[]>
Sets the list of IPv6 address ranges to be translated by the NAT64. The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>. Such as
"69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8".
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-State <State>
Sets the enabled state of the NAT64 configuration.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-TcpMappingTimeoutSeconds <UInt32>
Specifies the lifetime for a TCP mapping after which it is released by the NAT64. The minimum value is 1800 seconds.
The default value is 7200 seconds.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_NetNatTransitionConfiguration
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Example 1
PS C:\\>$nat64Prefix = "2009:1:2:3:4:5::/96"
PS C:\\>$prefixMapping = "$nat64Prefix,0.0.0.0/0"
PS C:\\>$portPool = "33.0.0.1,6000-10000"
PS C:\\>New-NetNatTransitionConfiguration -InstanceName NAT64 OutboundInterface corpnet -PrefixMapping $prefixMapping -IPv4AddressPortPool $portPool
This example creates a NAT64 configuration for the instance named NAT64.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287467
Disable-NetNatTransitionConfiguration
Enable-NetNatTransitionConfiguration
Get-NetNatTransitionConfiguration
Get-NetNatTransitionMonitoring
Remove-NetNatTransitionConfiguration
Set-NetNatTransitionConfiguration