< Back
Reset-Net6to4Configuration
Post
NAME Reset-Net6to4Configuration
SYNOPSIS
Resets the Group Policy Object (GPO) settings for a 6to4 configuration.
SYNTAX
Reset-Net6to4Configuration [-AsJob] [-AutoSharing] [-CimSession <CimSession[]>] [-GPOSession <String>] [-IPInterface <CimInstance>] [-PassThru]
[-PolicyStore <String>] [-RelayName] [-RelayState] [-ResolutionIntervalSeconds] [-State] [-ThrottleLimit <Int32>] [-Confirm] [-WhatIf]
[<CommonParameters>]
Reset-Net6to4Configuration [-AsJob] [-AutoSharing] [-CimSession <CimSession[]>] [-PassThru] [-RelayName] [-RelayState]
[-ResolutionIntervalSeconds] [-State] [-ThrottleLimit <Int32>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Reset-Net6to4Configuration resets the Group Policy Object (GPO) settings for a 6to4 configuration to the not configured state. Group Policy
settings have three possible states: not configured, enabled, and disabled.
6to4 is an address assignment and router-to-router automatic tunneling technology that is described in RFC 3056: Connection of IPv6 Domains via
IPv4 Clouds. 6to4 provides a globally-routable IPv6 address to a host with a public IPv4 address. This IPv6 address can be used to connect to
other 6to4 hosts or the IPv6 Internet.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AutoSharing [<SwitchParameter>]
Resets the AutoSharing policy element to not configured. You can configure this parameter by using the Set-Net6to4Configuration cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the Group Policy session in which to store the configuration information.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the 6to4 configuration object to reset.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IPInterface <CimInstance>
Specifies the IP interface on which to reset the 6to4 configuration.
Required? false
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store that contains the 6to4 configuration to reset. For this cmdlet, this parameter only supports GPO stores.
To reset a 6to4 configuration stored in a GPO, specify the GPO name using the following format: Domain\\GPOName
You cannot use this parameter with the GPOSession parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-RelayName [<SwitchParameter>]
Resets the 6to4 relay name to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-RelayState [<SwitchParameter>]
Resets the 6to4 relay state to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ResolutionIntervalSeconds [<SwitchParameter>]
Resets the resolution interval to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-State [<SwitchParameter>]
Resets the state of the 6to4 configuration to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
This cmdlet accepts no input objects.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_Net6to4Configuration
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
When the Passthru parameter is specified, this cmdlet outputs a modified Windows Management Instrumentation (WMI) object.
Example 1: Reset the 6to4 configuration of an interface
PS C:\\>$config = ( Get-NetIPInterface -InterfaceIndex 14 | Get-Net6to4Configuration )
PS C:\\>Reset-Net6to4Configuration ????????InputObject $config
This set of commands uses the Get-NetIPInterface cmdlet to get the configuration information for the interface at index 14 and then passes the
interface configuration to the Get-Net6to4Configuration cmdlet to get the 6to4 configuration. The result is stored in a variable named $config.
The contents of the variable are then passed to this cmdlet.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287472
Get-NetIPInterface
Get-Net6to4Configuration
Reset-Net6to4Configuration
SYNOPSIS
Resets the Group Policy Object (GPO) settings for a 6to4 configuration.
SYNTAX
Reset-Net6to4Configuration [-AsJob] [-AutoSharing] [-CimSession <CimSession[]>] [-GPOSession <String>] [-IPInterface <CimInstance>] [-PassThru]
[-PolicyStore <String>] [-RelayName] [-RelayState] [-ResolutionIntervalSeconds] [-State] [-ThrottleLimit <Int32>] [-Confirm] [-WhatIf]
[<CommonParameters>]
Reset-Net6to4Configuration [-AsJob] [-AutoSharing] [-CimSession <CimSession[]>] [-PassThru] [-RelayName] [-RelayState]
[-ResolutionIntervalSeconds] [-State] [-ThrottleLimit <Int32>] -InputObject <CimInstance[]> [-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The Reset-Net6to4Configuration resets the Group Policy Object (GPO) settings for a 6to4 configuration to the not configured state. Group Policy
settings have three possible states: not configured, enabled, and disabled.
6to4 is an address assignment and router-to-router automatic tunneling technology that is described in RFC 3056: Connection of IPv6 Domains via
IPv4 Clouds. 6to4 provides a globally-routable IPv6 address to a host with a public IPv4 address. This IPv6 address can be used to connect to
other 6to4 hosts or the IPv6 Internet.
PARAMETERS
-AsJob [<SwitchParameter>]
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the
session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell???? background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AutoSharing [<SwitchParameter>]
Resets the AutoSharing policy element to not configured. You can configure this parameter by using the Set-Net6to4Configuration cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-CimSession <CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession
or Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession <String>
Specifies the Group Policy session in which to store the configuration information.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject <CimInstance[]>
Specifies the 6to4 configuration object to reset.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-IPInterface <CimInstance>
Specifies the IP interface on which to reset the 6to4 configuration.
Required? false
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore <String>
Specifies the policy store that contains the 6to4 configuration to reset. For this cmdlet, this parameter only supports GPO stores.
To reset a 6to4 configuration stored in a GPO, specify the GPO name using the following format: Domain\\GPOName
You cannot use this parameter with the GPOSession parameter.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-RelayName [<SwitchParameter>]
Resets the 6to4 relay name to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-RelayState [<SwitchParameter>]
Resets the 6to4 relay state to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ResolutionIntervalSeconds [<SwitchParameter>]
Resets the resolution interval to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-State [<SwitchParameter>]
Resets the state of the 6to4 configuration to not configured.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit <Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running
on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
This cmdlet accepts no input objects.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\\StandardCimv2\\MSFT_Net6to4Configuration
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
When the Passthru parameter is specified, this cmdlet outputs a modified Windows Management Instrumentation (WMI) object.
Example 1: Reset the 6to4 configuration of an interface
PS C:\\>$config = ( Get-NetIPInterface -InterfaceIndex 14 | Get-Net6to4Configuration )
PS C:\\>Reset-Net6to4Configuration ????????InputObject $config
This set of commands uses the Get-NetIPInterface cmdlet to get the configuration information for the interface at index 14 and then passes the
interface configuration to the Get-Net6to4Configuration cmdlet to get the 6to4 configuration. The result is stored in a variable named $config.
The contents of the variable are then passed to this cmdlet.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?linkid=287472
Get-NetIPInterface
Get-Net6to4Configuration
Reset-Net6to4Configuration