< Back
New-SmbMultichannelConstraint
Post
NAME New-SmbMultichannelConstraint
SYNOPSIS
Creates an SMB multi-channel constraint for the specified server.
SYNTAX
New-SmbMultichannelConstraint [-ServerName] <String> [-InterfaceIndex] <UInt32[]> [-CimSession <CimSession[]>] [-Force] [-ThrottleLimit <Int32>]
[-Confirm] [-WhatIf] [<CommonParameters>]
New-SmbMultichannelConstraint [-ServerName] <String> [-InterfaceAlias] <String[]> [-CimSession <CimSession[]>] [-Force] [-ThrottleLimit <Int32>]
[-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The New-SmbMultichannelConstraint cmdlet creates a Server Message Block (SMB) multi-channel constraint for the specified server.
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or
Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Force [<SwitchParameter>]
Forces the command to run without asking for user confirmation.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceAlias <String[]>
Specifies the interface aliases of the network interfaces that is used to connect to the server.
Required? true
Position? 3
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceIndex <UInt32[]>
Specifies the interface indexes of the network interfaces that are used to connect to the server.
Required? true
Position? 3
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ServerName <String>
Specifies, when the SMB client is connecting to this server, that the constraints determine which network interfaces are used.
Required? true
Position? 2
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is
entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the
computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/SMB/MSFT_SmbMultiChannelConnection
This cmdlet returns a MSFT_SmbMultiChannelConnection object that represents the SMB multi-channel constraints for the server against which one or
more constraints are created.
Example 1: Create an SMB multi-channel constraint for an SMB server
PS C:\\>New-SmbMultichannelConstraint -ServerName "Contoso-SO" -InterfaceAlias "RDMA1", "RDMA2"
Confirm
Are you sure you want to perform this action?
Performing operation 'New-SmbMultichannelConstraint' on Target 'Contoso-SO'.
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): Y
InterfaceAlias : RDMA1
InterfaceGuid : {597b0a73-2b66-4be0-9e6d-f42eae8a35d6}
InterfaceIndex : 12
ServerName : Contoso-SO
PSComputerName :
InterfaceAlias : RDMA2
InterfaceGuid : {bd3c4a04-64cf-4205-88f5-38c4c35dfc38}
InterfaceIndex : 15
ServerName : Contoso-SO
PSComputerName :
This command creates an SMB multi-channel constraint for the SMB server named Contoso-SO.
Example 2: Create an SMB multi-channel constraint for an SMB server without confirmation
PS C:\\>New-SmbMultichannelConstraint -ServerName "Contoso-SO" -InterfaceIndex 12, 15 -Force
InterfaceAlias : RDMA1
InterfaceGuid : {597b0a73-2b66-4be0-9e6d-f42eae8a35d6}
InterfaceIndex : 12
ServerName : Contoso-SO
PSComputerName :
InterfaceAlias : RDMA2
InterfaceGuid : {bd3c4a04-64cf-4205-88f5-38c4c35dfc38}
InterfaceIndex : 15
ServerName : Contoso-SO
PSComputerName :
This command creates an SMB multi-channel constraint for the SMB server named Contoso-SO without user confirmation.
RELATED LINKS
Get-SmbMultichannelConstraint
Remove-SmbMultichannelConstraint
SYNOPSIS
Creates an SMB multi-channel constraint for the specified server.
SYNTAX
New-SmbMultichannelConstraint [-ServerName] <String> [-InterfaceIndex] <UInt32[]> [-CimSession <CimSession[]>] [-Force] [-ThrottleLimit <Int32>]
[-Confirm] [-WhatIf] [<CommonParameters>]
New-SmbMultichannelConstraint [-ServerName] <String> [-InterfaceAlias] <String[]> [-CimSession <CimSession[]>] [-Force] [-ThrottleLimit <Int32>]
[-Confirm] [-WhatIf] [<CommonParameters>]
DESCRIPTION
The New-SmbMultichannelConstraint cmdlet creates a Server Message Block (SMB) multi-channel constraint for the specified server.
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or
Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Force [<SwitchParameter>]
Forces the command to run without asking for user confirmation.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceAlias <String[]>
Specifies the interface aliases of the network interfaces that is used to connect to the server.
Required? true
Position? 3
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-InterfaceIndex <UInt32[]>
Specifies the interface indexes of the network interfaces that are used to connect to the server.
Required? true
Position? 3
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ServerName <String>
Specifies, when the SMB client is connecting to this server, that the constraints determine which network interfaces are used.
Required? true
Position? 2
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is
entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the
computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-Confirm [<SwitchParameter>]
Prompts you for confirmation before running the cmdlet.Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf [<SwitchParameter>]
Shows what would happen if the cmdlet runs. The cmdlet is not run.Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
None
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/SMB/MSFT_SmbMultiChannelConnection
This cmdlet returns a MSFT_SmbMultiChannelConnection object that represents the SMB multi-channel constraints for the server against which one or
more constraints are created.
Example 1: Create an SMB multi-channel constraint for an SMB server
PS C:\\>New-SmbMultichannelConstraint -ServerName "Contoso-SO" -InterfaceAlias "RDMA1", "RDMA2"
Confirm
Are you sure you want to perform this action?
Performing operation 'New-SmbMultichannelConstraint' on Target 'Contoso-SO'.
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): Y
InterfaceAlias : RDMA1
InterfaceGuid : {597b0a73-2b66-4be0-9e6d-f42eae8a35d6}
InterfaceIndex : 12
ServerName : Contoso-SO
PSComputerName :
InterfaceAlias : RDMA2
InterfaceGuid : {bd3c4a04-64cf-4205-88f5-38c4c35dfc38}
InterfaceIndex : 15
ServerName : Contoso-SO
PSComputerName :
This command creates an SMB multi-channel constraint for the SMB server named Contoso-SO.
Example 2: Create an SMB multi-channel constraint for an SMB server without confirmation
PS C:\\>New-SmbMultichannelConstraint -ServerName "Contoso-SO" -InterfaceIndex 12, 15 -Force
InterfaceAlias : RDMA1
InterfaceGuid : {597b0a73-2b66-4be0-9e6d-f42eae8a35d6}
InterfaceIndex : 12
ServerName : Contoso-SO
PSComputerName :
InterfaceAlias : RDMA2
InterfaceGuid : {bd3c4a04-64cf-4205-88f5-38c4c35dfc38}
InterfaceIndex : 15
ServerName : Contoso-SO
PSComputerName :
This command creates an SMB multi-channel constraint for the SMB server named Contoso-SO without user confirmation.
RELATED LINKS
Get-SmbMultichannelConstraint
Remove-SmbMultichannelConstraint