< Back
Enable-StorageEnclosureIdentification
Post
NAME Enable-StorageEnclosureIdentification
SYNOPSIS
Enables the identification LED on a storage enclosure or the slots for individual disks.
SYNTAX
Enable-StorageEnclosureIdentification [-FriendlyName] <String[]> [-CimSession <CimSession[]>] [-PassThru] [-SlotNumbers <UInt32[]>] [-ThrottleLimit
<Int32>] [<CommonParameters>]
Enable-StorageEnclosureIdentification [-CimSession <CimSession[]>] [-PassThru] [-SlotNumbers <UInt32[]>] [-ThrottleLimit <Int32>] -UniqueId <String[]>
[<CommonParameters>]
Enable-StorageEnclosureIdentification [-CimSession <CimSession[]>] [-PassThru] [-SlotNumbers <UInt32[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Enable-StorageEnclosureIdentification cmdlet enables the identification LED on the specified storage enclosure and, optionally, on the slots for
individual disks. Administrators typically use LEDs to locate a physical disk in an enclosure for removal or replacement. This cmdlet requires a storage
enclosure that supports SCSI Enclosure Services (SES).
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or
Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-FriendlyName <String[]>
Specifies an array of friendly names. This cmdlet turns on the identification LED for the enclosures that the names specify or for slots that belong
to the specified enclosures.
Required? true
Position? 1
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an array of StorageEnclosure objects. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-SlotNumbers [<UInt32[]>]
Specifies an array of slot numbers. This cmdlet turns on the identification LEDs for the slots that the numbers identify.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is
entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the
computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-UniqueId <String[]>
Specifies an array of IDs. This cmdlet turns on the identification LED for the enclosures that the IDs specify or for slots that belong to the
specified enclosures.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
MSFT_StorageEnclosure[]
This cmdlet does not generate any output by default. If you specify the PassThru parameter, the cmdlet returns an array of MSFT_StorageEnclosure
objects.
Example 1: Enable identification of an enclosure
PS C:\\>Enable-StorageEnclosureIdentification -FriendlyName "E11"
This command enables identification for the enclosure named E11.
Example 2: Enable identification of specified slot numbers
PS C:\\>Enable-StorageEnclosureIdentification -FriendlyName "E11" -SlotNumbers @(20, 14)
This command enables identification for the slots numbers 20 and 14 of the enclosure named E11.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=812150
Disable-StorageEnclosureIdentification
Get-StorageEnclosureStorageNodeView
Get-StorageEnclosureVendorData
SYNOPSIS
Enables the identification LED on a storage enclosure or the slots for individual disks.
SYNTAX
Enable-StorageEnclosureIdentification [-FriendlyName] <String[]> [-CimSession <CimSession[]>] [-PassThru] [-SlotNumbers <UInt32[]>] [-ThrottleLimit
<Int32>] [<CommonParameters>]
Enable-StorageEnclosureIdentification [-CimSession <CimSession[]>] [-PassThru] [-SlotNumbers <UInt32[]>] [-ThrottleLimit <Int32>] -UniqueId <String[]>
[<CommonParameters>]
Enable-StorageEnclosureIdentification [-CimSession <CimSession[]>] [-PassThru] [-SlotNumbers <UInt32[]>] [-ThrottleLimit <Int32>] [<CommonParameters>]
DESCRIPTION
The Enable-StorageEnclosureIdentification cmdlet enables the identification LED on the specified storage enclosure and, optionally, on the slots for
individual disks. Administrators typically use LEDs to locate a physical disk in an enclosure for removal or replacement. This cmdlet requires a storage
enclosure that supports SCSI Enclosure Services (SES).
PARAMETERS
-CimSession [<CimSession[]>]
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or
Get-CimSession cmdlet. The default is the current session on the local computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-FriendlyName <String[]>
Specifies an array of friendly names. This cmdlet turns on the identification LED for the enclosures that the names specify or for slots that belong
to the specified enclosures.
Required? true
Position? 1
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
-PassThru [<SwitchParameter>]
Returns an array of StorageEnclosure objects. By default, this cmdlet does not generate any output.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-SlotNumbers [<UInt32[]>]
Specifies an array of slot numbers. This cmdlet turns on the identification LEDs for the slots that the numbers identify.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit [<Int32>]
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is
entered, then Windows PowerShell???? calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the
computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value none
Accept pipeline input? false
Accept wildcard characters? false
-UniqueId <String[]>
Specifies an array of IDs. This cmdlet turns on the identification LED for the enclosures that the IDs specify or for slots that belong to the
specified enclosures.
Required? true
Position? named
Default value none
Accept pipeline input? True (ByPropertyName)
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
MSFT_StorageEnclosure[]
This cmdlet does not generate any output by default. If you specify the PassThru parameter, the cmdlet returns an array of MSFT_StorageEnclosure
objects.
Example 1: Enable identification of an enclosure
PS C:\\>Enable-StorageEnclosureIdentification -FriendlyName "E11"
This command enables identification for the enclosure named E11.
Example 2: Enable identification of specified slot numbers
PS C:\\>Enable-StorageEnclosureIdentification -FriendlyName "E11" -SlotNumbers @(20, 14)
This command enables identification for the slots numbers 20 and 14 of the enclosure named E11.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=812150
Disable-StorageEnclosureIdentification
Get-StorageEnclosureStorageNodeView
Get-StorageEnclosureVendorData